• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.54-58
• /
• 2003

In this study, the solution of Gel'fand-Levitan-Marchenko integral equation in the inverse scattering problem is efficiently solved for arbitrarily specified spectra pattern which are reflected from the restricted potential. The procedure is based on the successive approach without iterations. This method lessens the truncation errors which plague conventional design schemes using specific windows for reflection coefficients. It is shown that the method is adequate for the synthesis of the continuously varying one-dimensional potential of the nonuniformly distributed dielectric constants.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.30.2-30.2
• /
• 2021

The extended Lyα nebulae (also known as Lyα blobs or LABs) observed at z=2-6 can provide clues to galaxy formation in the early universe. The connection of LABs with the overdensities of compact Lyα emitters suggests that they are associated with matter density peaks in the universe and thus likely to evolve into the present-day groups and clusters of galaxies. However, the mechanism powering the extended Lyα emission in LABs is remained controversial. The detection of polarization signals that follow the theoretically predicted trend is interpreted as strong evidence supporting that the LABs are caused primarily by the resonance scattering of Lyα originating from star-forming galaxies and AGNs. However, Trebitsch et al. (2016) claimed that the radial profile of polarization could be better explained by the scenario in which Lyα photons are produced in the cooling gas surrounding galaxies and then self-scattered by the gas, rather than by the scattering scenario of photons originating from the central galaxies. In this presentation, using LaRT, a state-of-art Lyα radiative transfer code, it is demonstrated that the observed polarization pattern can be reproduced even with the scattering scenario.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.129-134
• /
• 1995

Bulk properties of single crystals $KMnCl_3$ undoped and Mg- doped $LiNbO_3$ were examined by using the neutron scattering technique. This study shows that the good -looking samples by polarized light have to be examined by the. neutron scattering to ensure the bulk properties of single crystal. Large mosaic spread in KMnCb indicated the crystal is not in a single domain. Many parts are relatively randomly directed against crystal axis with close angle each other. For the small mosaic spread of Li~ in the scattering pattern, it is found that some large domains have close orientations. Mg doped Li~ is turned out to be a well grown one.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.80-83
• /
• 2015

White reflective patterns are very difficult to fabricate, due to the scattering and reflection of light, especially when the pattern size goes down to micron size. A reflective white barrier structure of height $50{\mu}m$ and width $80{\mu}m$ was fabricated using dry-film resist as an intermediate reverse pattern. The reverse dry-film resist pattern was coated with an $SiO_2$ layer by sputtering, to protect the resist from chemical attack by the radical molecules in UV white resin. The UV white resin was applied on the dry-film resist pattern and then cured with ultraviolet light. The fine three-dimensional reflective patterns were finished by removing the dry-film resist.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.234-239
• /
• 2006

This paper introduces an auto-feeding system to exactly control the feeding time and the amount to cultured fishes in aquaculture industrial field. To reduce expensive costs or labors in this field, it was designed by the concept of controlling feed quantity exactly on the basis of fish's feeding behavior pattern in water tank. A feed control method of this system was developed for controlling feed amount by rotor capacity and motor rotated number. Moreover, a scattering section was selected by rotate way of propeller wing to scatter dried feed to designated site, and then, the diameter of its wing was 250mm and maximum scattering distance was 7.6m for 600rpm. Furthermore, the scattering ways were embodied 2 types such as a simplified way and a multistage shift way looks like a manual scattering. As a results, the multistage shift way is more effective to discharge the dried feed widely than the simple way in the water tank.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.365-378
• /
• 2022

Complete blood cell count(CBC) is a technique that counts leukocytes for each type of blood cell being analyzed. The principle is that laser is incident to ex vivo flowing leukocytes in a microcapillary tube and scattered light occurs by laser and leukocytes. By collecting the scattered light, we can count the types of cells because different cells generate different light-scattering patterns. However, the technique has an intrinsic limitation, scattering pattern is shown in a wide range region in the resulting, which makes it difficult to accurate analyze and use fluorescent dyes. To overcome this limitation, a new design of CBC with a dual laser, which irradiates with orthogonal angles for collecting quad-scattering information was proposed. Before development, the scattering difference depending on wavelength must be investigated to only catch up to the scattered signal by angles. Some studies, which focused on simple particles, have been conducted to theoretically and experimentally investigate different scatterings by wavelength. In this study, we propose an optical system for measuring scattered light and investigate a complex particle. As a result, the green laser made strong scattering signals in both the forward and side direction: 10% and 30%, respectively.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.97-106
• /
• 2002

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the light scattering patterns with time evolved during water vapor quenching (relative humidity of 53 (${\pm}3)%$ at $26^{\circ}C$ of polysulfone (PSf)/NMP/Alcohol and chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol, respective1y. Time dependence of the position of the light scattering maximum was observed at PSf dope solutions, confirming spinodal decomposition (SD), while CPVC dope solutions showed a decreased scattered light intensity with an increased q-value, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahn's linear theory of spinodal decomposition, regardless of types of non-solvent additive. Also, the size scales obtained by SALS were mutually compared to domain sizes gained by FE-SEM measurement. These observations of scattering pattern were much clearly observed for the 20PSf/70NMP/10n-butanol (w/w%) and agreed with the theoretical predictions for scattering patterns of each stage like the early, the intermediate, and the late stage of SD type phase separation. As the scattering maximum was observed at the larger angles (larger q) in the order of n-butanol > n-propanol > methanol > no alcohol, the pore size of final morphology decreased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.241-242
• /
• 2012

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.313-322
• /
• 2003

The morphology of poly(ethylene terephthalate) (PET)/poly(m-xylene adipamide) (MXD-6) blends, which was prepared by adding compatibilizer and interchange reaction agent, was investigated. The morphological change in the stretched blend films was also studied. The stretched film showed a dispersed MXD-6 fibril. This fibril became finer with increasing draw ratio (DR). The addition of compatibilizer and interchange reaction agent had no effect on the improvement of interfacial adhesion but caused a defect between the continuous phase and the dispersed phase, leading to the formation of irregular fibril. The change in the superstructure of blends with composition and draw ratio was examined with light scattering (LS). The H$\sub$v/ LS patterns showed a double-cross type pattern consisting of a broad rod-like pattern and a sharp cross streak. On the basis of the model calculation of the H$\sub$v/ pattern, it was found that the appearance of the double-cross type pattern was attributed to the stacking of crystals oriented along the draw direction. The crystals were gradually oriented to the stretching direction with draw ratio. As a result, the high level of orientation was obtained fur the sample of draw ratio is 6.0.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.499-503
• /
• 2006

This report presents a new technical approach for evaluating the fiber orientation of composites using small-angle light scattering (SALS). Glass fiber (GF)/polypropylene (PP) composites with different fiber orientations were prepared by drawing compression-molded specimens. The drawn samples were remelted and then annealed at $150^{\circ}C$ in order to induce a crystalline structure on the fiber surface, and then underwent SALS analysis. The samples showed a combination of circular and streak patterns. The model calculations demonstrated that the number of nuclei on the fiber surface and the thickness of the transcrystalline layer affected the sharpness and intensity of the streak pattern. In addition, the azimuthal angle of the streak pattern was found to be dependent on the direction of the transcrystalline layer, which correlated with the fiber direction. This correlation suggests that the fiber orientation in the composites can be easily evaluated using SALS.