• Journal of Ship and Ocean Technology
• /
• v.3 no.3
• /
• pp.1-12
• /
• 1999

Spectral fatigue damage calculations has been performed on four ships in order to assess the effect that the probabilistic modeling of sea states has on the estimated fatigue life. The damage estimation method is based on the Miner- Palmgren fatigue damage formulation and a spectral approach is used to determine the necessary variances of the stress processes. Both the horizontal and vertical hull girder bending induced stress process together with the local water pressure induced stress process is taken into account. The wave scatter diagrams are applied in the calculations and their fatigue severity is assessed by analyzing the results obtained with the ten scatter diagrams and the four ships. All four ships are analyzed both in full load and ballast conditions and while traveling at both full and reduced speed. It is found that the fatigue severity of a wave scatter diagram is dependent on several parameters, some of these being the extreme wave hight extrapolated from the scatter diagram and the mean zero up-crossing period in conjunction with the ship length . Based on these three parameters and expression is derived in order to calculate one single number describing the fatigue severity of a scatter diagram with respect to a certain ship.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.615-619
• /
• 2009

This paper is investigated to variation of wave power generation operation rate, operating capacity and output with the wave conditions represented by wave height-period window. By the use of the long-term wave data from 1979 to 2002 which is provided by Korea Ocean Research & Development Institute(KORDI), we calculated the monthly variation of significant wave height(Hs), zero-up crossing period(Tz) and distribution of wave appearance rate. And using the same wave data, it was charted the Hs-Tz and wave-energy scatter diagrams.

• Journal of Korean Society for Quality Management
• /
• v.43 no.4
• /
• pp.489-498
• /
• 2015

Purpose: This paper proposes S-NS diagram. S-NS diagram helps us find core factors which improve customer satisfaction. Methods: S-NS diagram draws a scatter diagram based on marks obtained from surveys consisting of several questions on satisfaction and non-satisfaction at the same time. S-NS diagram is divided into the 4 regions. We focused on region B which is High satisfaction and high non-satisfaction shown in S-NS diagram. Region B is the areas for needs to improve. Results: S-NS diagram can find few important factors which affect customer satisfaction. We improve Lecture Satisfaction using S-NS Diagram. Conclusion: S-NS diagram has been proven to be an effective method for improving customer satisfaction with a lecture satisfaction improvement example. We know S-NS diagram can use many fields including manufacture and service areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.361-367
• /
• 2015

The forming limit diagram (FLD) is the most commonly used tool for evaluating of sheet metal formability in the manufacturing field as well as the finite element analysis (FEA)-based design process. Determination of the forming limits is considerably influenced by testing/measuring machines, techniques and conditions. These influences may cause a large scatter in FLD from laboratory to laboratory. Scatter is especially true when the ‘position-dependent method’, as is specified in most national and international standards, is used. In the current study a new ‘time-dependent method’ is proposed, which is to determine the forming limit strains more accurately and reasonably when producing a FLD from experimental data. This method is based on continual strain measurement during the test. The results are compared to those from the existing standardized methods.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.216-221
• /
• 2001

In this paper, statistical properties of waves in the sea area of Pohang, Korea are examined absed on 1998-1999's wave data from directional wave buoy which is located Pohang(Janggigog). Wave data aquisition rate, monthly maximium, minimum and mean wave heights, frequency of wave direction are summarized. Wave height and period scatter diagrams and n-year return period wave heights are estimated. Wave periods of maximum wave heights are also estimated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.231-245
• /
• 2017

The purpose of this study is to analyze the trend line through scatter diagram analysis on correlation between SNS addiction tendencies and learning attitudes, figure out the knee point influencing learning attitudes negatively in detail, and examine influence among subareas. To address the goal, study questions are formulated as follows. First, this author did screening on the data of variables measured and analyzed descriptive statistics. Second, this researcher produced the trend line by drawing a scatter diagram in order to analyze correlation between SNS addiction tendencies, withdrawal symptoms, excessive communication, and excessive time wasting, and learning attitudes exploratorily. Third, to explore correlation between self-evaluation, learning participation, and developmental attitudes, the subfactors of learning attitudes related to SNS addiction tendencies, this author drew a scatter diagram and analyzed the threshold of positive and negative correlation. To verify the study questions, the SNS addiction tendency scale and learning attitude scale were applied to 301 university students in Chungcheong area. According to the study results, first, their learning attitudes are influenced by SNS addiction tendencies, excessive communication and excessive time wasting, and they are not influenced by withdrawal symptoms that much. Second, excessive communication, a factor of SNS addiction tendencies, and self-evaluation and developmental attitudes, factors of learning attitudes, show positive correlation to some extent and indicate negative correlation after the threshold. However, excessive communication and learning participation are found to show no correlation. Third, according to the results of examining correlation with learning attitudes by dividing them into excessive communication and excessive time wasting groups with the knee point of 1.40, as the symptom of excessive communication is found more, it influences self-evaluation, learning participation, developmental attitudes, and learning attitudes more negatively in general. The result of this study is expected to provide foundational material necessary to develop educational programs to prevent undergraduates' excessive SNS use and SNS addiction which can be used in the scenes of counseling or education.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.624-637
• /
• 2019

A semi-submersible offshore platform always operates under complex weather conditions, especially wind and waves. It is vital to analyze the structural dynamic responses of the platform in short-term sea states under the combined wind and wave loads, which touches upon three following work. Firstly, a derived relationship between wind and waves reveals a correlation of wind velocity and significant wave height. Then, an Improved Mixture Simulation (IMS) method is proposed to simulate the time series of wind/waves accurately and efficiently. Thus, a wind-wave scatter diagram is expanded from the traditional wave scatter diagram. Finally, the time series of wind/wave pressures on the platform in the short-term sea states are converted by Workbench-AQWA. The numerical results demonstrate that the proposed numerical methods are validated to be applicable for wind and wave simulations in structural analyses. The structural dynamic responses of the platform members increase with the wind and wave strength. In the up-wind and wave state, the stresses on the deck, the connections between deck and columns, and the connection between columns and pontoons are relatively larger under the vertical bending moment. These numerical methods and results are wished to provide some references for structural design and health monitoring of several offshore platforms.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2814-2818
• /
• 2000

This paper describes an image processing algorithm capable of recognizing the road lane using a CDF (Cumulative Distribution Function). which is designed for the model function of the road lane. The CDF has distinctive peak points at the vicinity of the lane direction because of the directional and positional continuities of the lane. We construct a scatter diagram by collecting the edge pixels with the direction corresponding to the peak point of the CDF and carry out the principal axis-based line fitting for the scatter diagram to obtain the lane information. As noises play the role of making a lot of similar features to the lane appear and disappear in the image we introduce a recursive estimator of the function to reduce the noise effect and a scene understanding index (SUI) formulated by statistical parameters of the CDF to prevent a false alarm or miss detection. The proposed algorithm has been implemented in a real time on the video data obtained from a test vehicle driven in a typical highway.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.69-77
• /
• 2001

This paper describes an image processing algorithm capable of recognizing road lanes by using a CDF(cumulative distribution function). The CDF is designed for the model function of road lanes. Based on the assumptions that there are no abrupt changes in the direction and location of road lanes and that the intensity of lane boundaries differs from that of the background, we formulated the CDF, which accumulates the edge magnitude for edge directions. The CDF has distinctive peak points at the vicinity of lane directions due to the directional and the positional continuities of a lane. To obtain lane-related information a scatter diagram was constructed by collecting edge pixels, of which the direction corresponds to the peak point of the CDF, then the principal axis-based line fitting was performed for the scatter diagram. Noises can cause many similar features to appear and to disappear in an image. Therefore, to reduce the noise effect a recursive estimator of the CDF was introduced, and also to prevent false alarms or miss detection a scene understanding index (DUI) was formulated by the statistical parameters of the CDF. The proposed algorithm has been implemented in real time on video data obtained from a test vehicle driven on a typical highway.