• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.529-536
• /
• 2007

Registration between image and object space is a fundamental step in photogrammetry and computer vision. Along with rapid development of sensors - multi/hyper spectral sensor, laser scanning sensor, radar sensor etc., the needs for registration between different sensors are ever increasing. There are two important considerations on different sensor registration. They are sensor invariant feature extraction and correspondence between them. Since point to point correspondence does not exist in image and laser scanning data, it is necessary to have higher entities for extraction and correspondence. This leads to modify first, existing mathematical and geometrical model which was suitable for point measurement to line measurements, second, matching scheme. In this research, linear feature is selected for sensor invariant features and matching entity. Linear features are incorporated into mathematical equation in the form of extended collinearity equation for registration problem known as photo resection which calculates exterior orientation parameters. The other emphasis is on the scheme of finding matched entities in the aide of RANSAC (RANdom SAmple Consensus) in the absence of correspondences. To relieve computational load which is a common problem in sampling theorem, deterministic sampling technique and selecting 4 line features from 4 sectors are applied.

• 전자공학회논문지
• /
• 제49권9호
• /
• pp.322-327
• /
• 2012

마주보는 2개의 병렬전극을 이용한 스캔 방식의 디지털 X-ray 영상 센서는 많은 발전을 해왔으며 상업용으로 널리 이용되고 있다. 본 연구에서는 PDP(plasma display panel) 제조 공정에서 사용되고 있는 글라스 재질에 silver paste 전극을 이용하여 드리프트 전극과 픽셀 전극이 있는 챔버를 형성하고 챔버내에 X-ray와 반응하는 Xe 가스를 주입하여 스캔 방식의 1D X-ray 영상 센서를 제작하였다. 드리프트 전극의 바이어스 전압 크기에 따른 싱글 픽셀의 X-ray 신호 크기를 평가하였으며 납(Pb)을 이용하여 싱글 픽셀을 차폐하였을 경우와 차폐하지 않았을 때의 싱글 픽셀 신호 특성을 조사하였다. X-ray 흡수율(4%)은 소다 라임(soda lime, 1.1mm) 글라스에서 가장 낮았으며 센서에서 검출되는 전기적 신호는 드리프트 전극에 인가하는 전압이 클수록 증가하였다. 그리고 자체 제작한 DAS(data acquisition system) 및 센서 스캐닝 시스템을 이용하여 디지털 영상을 구현하였다.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.459-466
• /
• 2005

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.562-565
• /
• 2002

Recent technologic innovations have created possibilities for restorative dentistry, such as computer-aided design and computer-aided manufacturing. This article presents a CAD process that has been developed for the fabrication of dental restorations. This process uses a 4-axes driving mechanism and an improved optical displacement sensor, successfully applied in other industries. In optical displacement sensor, the light beam emitted from the LED is converged through the light source lenses and thrown on the object to be detected. When the light beam is reflected from the object, however, it is diffused. The diffused light beam is converged again by the receiver lenses and cast on the optical position detector element as a small spot.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.155-160
• /
• 2002

This paper focuses on the problem of local obstacle avoidance of mobile robots. To solve this problem, the safety direction section search algorithm is suggested. This concept is mainly composed with non-collision section and collision section from the detecting area of laser scanning sensor. Then, we will search for the most suitable direction in these sections. The proposed local motion planning method is simple and requires less computation than others. An environment model is developed using the vector space concept to determine robot motion direction taking the target direction, obstacle configuration, and robot trajectory into account. Since the motion command is obtained considering motion dynamics, it results in smooth and fast as well as safe movement. Using the mobile base, the proposed obstacle avoidance method is tested, especially in the environment with pillar, wall and some doors. Also, the proposed autonomous motion planning and control algorithm are tested extensively. The experimental results show the proposed method yields safe and stable robot motion through the motion speed is not so fast.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.61-70
• /
• 2001

This paper introduces a new digitization method with sensor fusion for shape measurement in reverse engineering. Digitization can be classified into contact and non-contact type according to the measurement devices. Important thing in digitization is speed and accuracy. The former is excellent in speed and the latter is good for accuracy. Sensor fusion in digitization intends to incorporate the merits of both types so that the system can be automatized. Firstly, non-contact sensor with vision system acquires coarse 3D point data rapidly. This process is needed to identify and loco]ice the object located at unknown position on the table. Secondly, accurate 3D point data can be automatically obtained using scanning probe based on the previously measured coarse 3D point data. In the research, a great number of measuring points of equi-distance were instructed along the line acquired by the vision system. Finally, the digitized 3D point data are approximated to the rational B-spline surface equation, and the free-formed surface information can be transferred to a commercial CAD/CAM system via IGES translation in order to machine the modeled geometric shape.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.187-193
• /
• 2003

This paper presents an on-machine measurement method of flatness error fur surface machining processes. There are two kinds of on-machine measurement methods available to measure flatness errors in workpieces: i.e., surface scanning method and sensor scanning method. However, motion errors are often engaged in both methods. This paper proposes an idea to realize a measurement system of flatness errors and its rigorous application for estimation of motion errors of the positioning system. The measurement system is made by modifying the straightness measurement system, which consists of a laser, a CCD camera and processing system, a sensor head, and some optical units. The sensor head is composed of a retroreflector, a ball and ball socket, a linear motion guide unit and adjustable arms. The experimental .results show that the proposed method is useful to identify flatness errors of machined workpieces as well as motion errors of positioning systems.

• 센서학회지
• /
• 제33권2호
• /
• pp.63-69
• /
• 2024

A novel method for measuring hydrogen concentration is introduced, along with its working principle and a novel detection algorithm. This configuration requires no additional reference compartment for potentiometric electrochemical measurements; therefore, it is the most suitable for measuring dissolved hydrogen in the liquid phase. The sensor's electromotive force saturates at a certain point, depending on the hydrogen concentration during the heating process of the sensor operation. This dynamic temperature scanning method provides higher sensitivity than the constant temperature measurement method.

• 한국정보통신학회논문지
• /
• 제25권10호
• /
• pp.1416-1426
• /
• 2021

Scanning 타입 다채널 LiDAR 센서의 경우 수신되는 신호의 세기의 차이에 의한 walk error라는 거리 오차가 발생할 수 있다. 이러한 오차는 다수의 LiDAR 센서를 기반으로 주변 환경을 스캐닝할 경우 같은 물체에 대해 서로 다른 거리 값을 출력하게 한다. 다수의 LiDAR 센서를 이용하여 전방향 스캐닝할 경우, 센서의 시야각이 겹치는 구간에서 발생하는 walk error를 최소화하기 위해 외부 시스템 상에서 센서의 각 채널에 대한 convolution을 수행하고 오차를 최소화하고자 한다. 약 6×6 m 환경의 중앙에 4개의 LiDAR 센서들을 배치하고 주변 환경을 스캐닝 하였으며, 필터링을 적용한 결과, 거리 오차를 평균 0.5125m에서 0.16m까지 약 68% 개선할 수 있었으며, 표준 편차는 평균 0.0591에서 0.030675까지 약 48% 개선할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 1996