• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.389-394
• /
• 2000

Scanning Probe Microscope (SPM) such as Scanning Tunneling Microscope (STM) and Atomic Force Microscope (AEM) was shown to be the powerful tool for nano-scale characterization of material surfaces. Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform, and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1098-1101
• /
• 1995

NbTi thin films were prepared on Si wafer and Cu substrate by rf magnetron sputtering in the range of sputtering pressure $3{\times}10^{-2}$torr to $3{\times}10^{-4}$torr at room temperature. The influence of sputtering pressure and substrate type on crystallographic orientation and morphology of NbTi thin films was investigated by using X-ray diffraction(XRD) and scanning electron microscopy(SEM), respectively. And the effect of crystallographic orientation and morphology of NbTi film on electromagnetic behaviors was estimated by measuring critical current in various applied magnetic field. The film morphology changed from porous structure consisting of tapered crystallites to densely deposited film decreasing with sputtering pressure. The change of crystallographic orientation with the sputtering pressure and rf power was calculated from the texture coefficient of(002) plane based on XRD patterns. It was found that a change of texture coefficient of(002) plane increased with decreasing sputtering pressure. From observation of critical current in various applied magnetic field, we have identified that the change of critical current abruptly decrease applying with magnetic field and NbTi film produced at high sputtering pressure does not exhibit superconductivity but at low sputtering pressure shows superconductivity.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 1981

The structure of spiral thickenings, particulary the appearance, arrangement and orientation of thickenings in compression wood of Torreya nucifera, were studied in detail by light and polarizing microscope, scanning and transmission electron microscope. The results obtained are as follows: (1) Using the inclined sections at an angle of 45 degrees to the fiber axis, it seems that we can not only observe the more accurate transverse view of the thickenings but also investigate the formation of their thickenings. (2) Generally 2-4 pieces of thickenings are projected to the cell lumen as nipple-like appearance in transverse section and are as frequent, well developed, forming pair and have the rope-like appearance in radial surface. (3) The secondary wall of early wood is composed of 3 layers (S1, S2, S3) and orientation of thickening appears S helix but that of late wood is of 2 layers (S1, S2) and that orientation shows Z helix. Above two regions are demaracted at several tracheid cells from the growth ring boundary. (4) Orientation of thickening seems to be a element showing the characteristics of compression wood in Torreya nucifera. (5) It believes that the thickenings of compression wood are integral part of the S3 in early wood tracheids and of the S2 in late wood and have the same orientations as the inner-most microfibrils in these layers. (6) Thickening and cavities seem to be not formed together in a secondary cell wall of same tracheids.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.502-506
• /
• 2012

In order to find the structural characteristics of the thin films of group II-VI semiconductor compounds compared with those of powder materials, films were made of 4 powders of ZnS, CdS, CdSe, and CdTe(Aldrich), each with 99.99 % purity. For the ZnS/CdS multi-layers, the ZnS layer was coated over the CdS layer on an $AlO_x$ membrane, which served as a protective layer within a vacuum at the average speed of 1 ${\AA}$/sec. After studying the structures of the group II-VI semiconductor thin films by using X-ray spectroscopy, we found that the ZnS, ZnS/CdS, CdS, and CdSe films were hexagonal and exhibited some degree of preferred orientation. Also, the particles of the thin films of II-VI semiconductor compounds proved to be more homogeneous in size compared to those of the powder materials. These results were further verified through scanning electron microscopy(SEM), EDX analysis, and powder and thin film X-ray diffraction.

• Corrosion Science and Technology
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2017

When aiming for an increased and more sustainable use of metals a thorough knowledge of the corrosion phenomenon as function of the local metal microstructure is of crucial importance. In this work, we summarize the information presented in our previous publications[1-3] and present an overview of the different local (electrochemical) techniques that have been proven to be effective in studying the relation between different microstructural variables and their different electrochemical behavior. Atomic force microscopy (AFM)[1], scanning electrochemical microscopy (SECM)[2], and electrochemical scanning tunneling microscopy (EC-STM)[3] were used in combination with electron backscatter diffraction (EBSD). Consequently, correlations could be identified between the grain orientation and grain boundary characteristics, on the one hand, and the electrochemical behavior on the other hand. The grain orientation itself has an influence on the corrosion, and the orientation of the neighboring grains also seems to play a decisive role in the dissolution rate. With respect to intergranular corrosion, only coherent twin boundaries seem to be resistant.

• Composites Research
• /
• v.28 no.5
• /
• pp.270-276
• /
• 2015

Polyvinylidene fluoride (PVDF)-based nanocomposites are fabricated by incorporation of boron nitride (BN) nanosheets with anisotropic orientation for a potential high thermal conducting ferroelectric materials. The PVDF is dissolved in dimethylformamide (DMF) and homogeneously mixed with exfoliated BN nanosheets, which is then cast into a polyimide film under application of high magnetic fields (0.45~10 T), where the direction of the filler alignment was controlled. The BN nanosheets are exfoliated by a mixed way of solvothermal method and ultrasonication prior to incorporation into the PVDF-based polymer suspension. X-ray diffraction, scanning electron microscope and thermal diffusivity are measured for the characterization of the polymer nanocomposites. Analysis shows that BN nanosheets are exfoliated into the fewer layers, whose basal planes are oriented either perpendicular or parallel to the composite surfaces without necessitating the surface modification induced by high magnetic fields. Moreover, the nanocomposites show a dramatic thermal diffusivity enhancement of 1056% by BN nanosheets with perpendicular orientation in comparison with the pristine PVDF at 10 vol % of BN, which relies on the degree of filler orientation. The mechanism for the magnetic field-induced orientation of BN and enhancement of thermal property of PVDF-based composites by the BN assembly are elucidated.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.758-763
• /
• 2002

The various ultrasonic energies (28 kHz, 40 kHz, 70 kHz) were used to improve the magnetic properties of Ba-ferrite as the perpendicular magnetic recording materials. In the sheet formation process, the different orientation hars were used to orientate perpendicularly the dispersed Ba-ferrite to sheet. Throughout these experiments, we have obtained relatively higher value of S. Q. (Squreness Ratio : 0.783) and O. R. (Orientation Ratio : 2.87) magnetic properties at 2 h ultrasonic treatment of 40 kHz ultrasonic energy. With aid of SEM(Scanning Electron Microscopy) images, the obtained sheet with dispersed of Ba-ferrite could be used for perpendicular magnetic recording due to orientated to easy magnetization axis, c-axis. In addition, the value of S. Q. of sheet decreased with increasing applied magnetic field angle during measuring of S. Q. value with changing applied magnetic field angle by VSM (Vibrating Sample Magnetrometer). This result also induced the probability for prependicular magnetic recording.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.89-97
• /
• 1995

The investigate the effect of fiber orientation on the interlaminar fracture toughness of carbon fiber reinforced plastics three prepregs which are domestic products are used in this paper. Those are used for the unidirectional composites, but only one is used for the cross-ply laminate composites which is molded $[0/90]_{6s},\;[0/45]_{6s},\;and\;[0/45/90]_{4s}$. The specimens used for the mode I and mode II Tests are DCB and ENF samples are examined by scanning electron microscope(SEM). The value of $G_{IC}$ is almost same when modified three calculating methods are applied. The highest value of $G_{IC}$at crack initiation is obtained at the $[0/90]_{6s}$ interlaminar and the lowest one is at the $[0/45/90]_{4s}$ interlaminar. The highest value of $G_{IIC}$ at crack initiation, however, is obtained at the $[0/90]_{6s}$ interlaminar and the lowest one is at the $[0/45]_{6s}$. The photographs of SEM show a difference behaviour between mode I and mode II fracture surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.894-897
• /
• 2004

Sodum bismuth titanate $(Na_{0.5}Bi_{0.5}TiO_3$ or NBT) thin films coated on the $LaNiO_3$ (LNO) electrode by sol-gel methode and rapid thermal annealing (RTA) technique. The NBT (NBT/LNO/Si) thin films examined by x-ray diffraction (XRD). The orientation of NBT was observed for films coated at $900^{\circ}C$, 5 min and $600^{\circ}C$, 60 min. Filed emission scanning electron microscopy (FE-SEM) showed uniform surface composed of grains. The grain size of NBT thin films increased with increasing annealing temperature.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.9-11
• /
• 2013

We have investigated the effect of thickness of the MgB2 film on the grain growth direction as well as on their superconducting properties. $MgB_2$ films of various thicknesses were fabricated on c-cut $Al_2O_3$ substrates at a temperature of $540^{\circ}C$ by using hybrid physical-chemical vapor deposition (HPCVD) technique. The superconducting transition temperature ($T_c$) was found to increase with increase in the thickness of the $MgB_2$ film. X-ray diffraction analysis revealed that the orientation of grains changed from c-axis to a-axis upon increasing the thickness of the $MgB_2$ film from 0.6 to 2.0 ${\mu}m$. $MgB_2$ grains of various orientations were observed in the microstructures of the films examined by scanning electron microscopy. It is observed that at high magnetic fields the 2.0-${\mu}m$-thick film exhibit considerably larger critical current density ($J_c$) as compared to 0.6-${\mu}m$-thick film. The results are discussed in terms of an intrinsic-pinning in $MgB_2$ similarly as intrinsic-pinning occurring in high-Tc cuprate superconductors with layered structure.