• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.128-129
• /
• 1999

Polygon Mirror Scanning(PMS) is composed of LED array, magnifying lens, polygon mirror and motor. It is important to correct the lens aberrations to gain the image we want to show. In this paper, we have simulated the lens aberration correction to reduce the spherical aberration . We have obtained a aspherical lens which is corrected the spherical aberration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.177-178
• /
• 2014

This work proposes a two-dimensional (2-D) laser scanning mirror actuator with a simple structure composed of one magnet and four coils. The mirror-actuating device generates 2-D scanning motions about two orthogonal axes by combining electromagnetic actuators of the conventional moving-magnet types. The magnet is attached to back side of the mirror placed inside of the moving frame. The four coils is placed on the base frame in a cross shape. We implement a finite element analysis to calculate magnetic flux in the electromagnetic system with the overall size of $20mm(W){\times}20mm(D){\times}13mm(H)$ for the mirror size of $8mm{\times}8mm$. The each moving-magnet type electromagnetic actuator has the motor constant 3.41 mNm/A and the restoring constant 1.75 mNm/rad and the resonance frequency of 58 Hz and the bandwidth of 80 Hz. The proposed compact and simple 2-D scanning mirror predicted advantages of large 2-D angular deflections, wide frequency bandwidth and low manufacturing cost.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.442-445
• /
• 1995

This paper presents the position tracking control of a laser scanning mirror system in which piezoelectic actuator is incorporated. Using the shear mode of the piezoelectric actuator,angular oscillation of a laser scanning mirror is derived. Torsion bar is rhen designed and attached to the piezoelctric actuator in order to magnify the amplitude generated by the actuator. Finite element modeling and analysis are essntial for designing the piezoelectic actuator. The torsional resonance mode of the piezoelectric actuator is found from the model analysis of the actuator and the mechanical shear is matched with the driving frequency. Transfer function between the electrical excitation and the mechanical shear deformation at resonance frequency is found form the response of the actuator calculated by the finite element analysis and the governing equation of the system is derived from d'Alembert's principle. Tracking control performance for desired trajectory which is, in fact, sinusoidal curve is presented in order to demonstrate the validity of the proposed system.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.578-585
• /
• 2009

In this paper, we present the design of an electromagnetic scanning mirror with torsional springs. The scanning mirror consisting of torsional springs and electromagnetic coils was designed for the applications of laser animation systems. We analyzed and optimized three types of torsional springs, namely, straight beam springs (SBS), classic serpentine springs (CSS), and rotated serpentine springs (RSS). The torsional springs were analyzed in terms of electrical resistance, fabrication error tolerance, and resonance mode separation of each type using analytical formula or numerical analysis. The RSS has advantages over the others as follows: 1) A low resistance of conductors, 2) wide resonance mode separation, 3) strong fabrication error tolerance, 4) a small footprint. The double-layer coils were chosen instead of single-layer coils with respect to electromagnetic forces. It resulted in lower power consumption. The geometry of the scanning mirror was optimized by calculations; RSS turn was 12 and the width of double-layer coil was $100{\mu}m$, respectively. When the static rotational angle is 5 degrees, the power consumption of the mirror plate was calculated to be 9.35 mW since the resistance of the coil part and a current is $122{\Omega}$ and 8.75 mA, respectively. The power consumption of full device including the mirror plate and torsional springs was calculated to be 9.63 mW.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.181-182
• /
• 2008

In this paper, we present the design of an electromagnetic scanning mirror with rotated serpentine springs. We considered three types of torsional springs: simple beam springs (SBS), classic serpentine springs (CSS), and rotated serpentine springs (RSS). The analysis was done for an electrical resistance, differences in the mode-frequency, and resonances regarding to spring thickness. Electromagnetic coils under the mirror plate were also analyzed for power consumption and the mechanical deflection. From the analysis result, RSS and electromagnetic coils were designed for the silicon scanning mirror.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.43-48
• /
• 1995

A high speed optic scanner capable of 16 frames/sec imaging has been developed for the realization of the infrared thermal Imaging system with a single element infrared sensor. The high speed optic scanner is composed of a rotating polygon mirror for horizontal scanning, a flat mirror mounted on a galvanometer for vertical scanning, and a spherical mirror. It has been experimentally found that the optic scanner is capable of 16 framesllsec imaging with the frame matrix size of 256 x 64.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.457-458
• /
• 2011

• 한국레이저가공학회지
• /
• 제1권1호
• /
• pp.24-29
• /
• 1998

A new wide laser beam optical system for the laser materials processing has been developed with a polygonal mirror. It consists of polygonal mirror and cooling part that prevents the surface of rotating polygonal mirror from damage by heat. The polygonal minors have been designed and made as 24 and 30 facets in pyramid type. This system provides a uniform linear laser heat source with the surface scanning width from 15 to 50mm according to the scanning height To examine the wide laser beam, He-Ne laser is used. Also, Acryl is used to confirm the laser beam pattern by bum-pattern print To analyze the energy distribution of the wide laser ben empirical values and theoretical values are compared and discussed. To improve the efficiency of the wide laser beam optical system, methods are suggested by the optical theories. For larger area processing like turbine blade, drawing blade, cold roller and guide plate, optimal overlapping locations have been calculated and analyzed by geometric and optical theories.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1117-1123
• /
• 2009

DMD(Digital Micro-mirror Device)와 갈바노 스캐너를 이용한 두부 고정형 다초점 디스플레이 시스템은 초점조절이 가능하여 스테레오스코픽 디스플레이에서 발생하는 양안의 수렴작용과 단안의 초점조절 작용의 불일치에 의한 눈의 피로 문제를 해결할 수 있는 디스플레이 시스템이다. 이 시스템은 레이저 스캐닝 방법으로 각 시점에 대한 영상의 수렴점을 형성하여 관찰자 동공에 제공함으로 초점조절이 가능토록 한다. 본 논문에서는 이 다초점 디스플레이 시스템의 레이저 스캐닝 방법을 수학적으로 분석하였고, 이러한 분석에 기반 한 다초점 시스템을 제작하여 비디오카메라를 통하여 초점조절이 가능함을 보였고, 결과적으로 레이저 스캐닝 방법에 의한 다초점 시스템의 시점 형성원리가 검증되었다.

• 한국광학회지
• /
• 제7권3호
• /
• pp.191-195
• /
• 1996

대기오염 연구용 이동형 라이다의 광계통을 설계하였다. 대기오염이나 오종층의 측정을 위해 라이다를 사용하며 군에서는 화생방 오염 측정에도 사용된다. 역 Cassegrain형의 시준기로 평행광을 만들어 평면경에 의해 전송하는 레이저광속과 수신 망원경의 광축이 일치하게 된다. 레이저광속은 대기로 향하여 전송되며 측정하고자 하는 물질에 의해 산란되어 수신 망원경으로 되돌아 온다. 주사반사경은 수직으로 60.deg. 수평으로 180.deg.회전되며 주사한다. 주사반사경은 수신망원경과 분리되어 자동차 지붕위에 설치된다. 수신된 레이저광은 공간주파수 여과기에 의해 여과되고, fabri렌즈에 의해 평행광으로 되어 광속분리기에 의해 2개의 광속으로 나뉘어 검출된다. 각 레이저광은 PM관에 의해 검출되어 증폭되고 분석된다.