• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.3
• /
• pp.492-511
• /
• 2013

According to IASB(International Accounting Standards Board), R&D(Research and Development) is defined as a tertiary sector industry combining research and development. Many studies investigated R&D industry clusters in the form of high-tech cluster(Coe et al., 2007). However, these studies only generalized various spatial cluster of R&D industries. In particular, the studies could not considers cluster formation process over time lacking statistical significance in space-time perspectives. This study, therefore, indicates the limitation of recent R&D cluster literature which only considers either time or space. In addition, this study explores space-time clusters in R&D industry together with textile and cloth industry for comparison. Discovering the existence and location of clusters, this study utilized space-time K function and space-time scan statistics. The result shows that R&D industry presents significant clusters only in spatial dimension. No significant clusters were found in space-time dimension. However, textile and clothing industry presents significant clusters in both spatial and space-time dimensions.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.293-304
• /
• 1996

The purpose of this study was to investigate the peak electromyographic activity(EMG) and time intervals in firing sequence of Anterior temporalis(TA) and Masseter(MM) on clenching, the number of tender points in the head and neck muscles, the occlusal contact state on clenching, and their relationship. 78 patients with Temporomandibular Disorders(TMDs) participated and were classified into articular or muscular group by clinical signs and symptoms. BioEMG$\textregistered$ of integrated masticatory function analyzer, Biopak$\textregistered$ system(Bioresearch Inc., USA), was used to measure EMG and related items, and T- Scan$\textregistered$(Tekscan, USA), computerized occlusal analyser, was used to record occlusal contact state on maximum voluntary clenching. EMG and occlusal contact were synchronously recorded and analysed with SAS Statistical program. The results of this study were as follows : 1. In total subjects, EMG of TA was lower than that of MM in articular group but in muscular group, vice versa, As a result, the ratio TA to MM was significantly different between the two groups. no significant differece. 3. The number and force of occlusal contact were more in articular group, but there was no significant difference in Total Left-Right statistics(TLR) between the two groups. 4. In unilaterally affected subjects for muscle function, no significant difference was observed between the affected side and the contralateral side in articular group, but in muscular group, the item of the number of tender points showed significant difference. However, for occlusal contact items, contact force in articular group shows significant difference between the two sides. 5. Rate of coincidence of the first firing side of TA with affected side or preferred chewing side was higher and not different between the two groups, but no significant correlation was showed between the first firing side and the first occlusal contact side.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.8
• /
• pp.1088-1097
• /
• 2005

Main objectives of this study were to investigate accuracy, bias and power of linear and threshold model segregation analysis methods for detection of major genes in categorical traits in farm animals. Maximum Likelihood Linear Model (MLLM), Bayesian Linear Model (BALM) and Bayesian Threshold Model (BATM) were applied to simulated data on normal, categorical and binary scales as well as to disease data in pigs. Simulated data on the underlying normally distributed liability (NDL) were used to create categorical and binary data. MLLM method was applied to data on all scales (Normal, categorical and binary) and BATM method was developed and applied only to binary data. The MLLM analyses underestimated parameters for binary as well as categorical traits compared to normal traits; with the bias being very severe for binary traits. The accuracy of major gene and polygene parameter estimates was also very low for binary data compared with those for categorical data; the later gave results similar to normal data. When disease incidence (on binary scale) is close to 50%, segregation analysis has more accuracy and lesser bias, compared to diseases with rare incidences. NDL data were always better than categorical data. Under the MLLM method, the test statistics for categorical and binary data were consistently unusually very high (while the opposite is expected due to loss of information in categorical data), indicating high false discovery rates of major genes if linear models are applied to categorical traits. With Bayesian segregation analysis, 95% highest probability density regions of major gene variances were checked if they included the value of zero (boundary parameter); by nature of this difference between likelihood and Bayesian approaches, the Bayesian methods are likely to be more reliable for categorical data. The BATM segregation analysis of binary data also showed a significant advantage over MLLM in terms of higher accuracy. Based on the results, threshold models are recommended when the trait distributions are discontinuous. Further, segregation analysis could be used in an initial scan of the data for evidence of major genes before embarking on molecular genome mapping.

• Korean Journal of Veterinary Research
• /
• v.53 no.1
• /
• pp.49-54
• /
• 2013

To investigate the transmission pattern of geographical area and temporal trends of the 2010~2011 foot-and-mouth disease (FMD) outbreaks in Korea, and to explore temporal intervals at which spatial clustering of FMD cases space-time analysis based on georeferenced database of 3,575 burial sites, from 30 November 2010 to 23 February 2011, was performed. The cases represent approximately 98.1% of all infected farms (n = 3,644) during the same period. Descriptive maps of spatial patterns of the outbreaks were generated by ArcGIS. Spatial Scan Statistics, using SaTScan software, was applied to investigate geographical clusters of FMD cases across the country. Overall, spatial heterogeneity was identified, and the transmission pattern was different by province. Cattle have more clusters in number but smaller in size, as compared to the swine population. In addition, spatiotemporal analysis and the comparison of clustering patterns between the first 7 days and days 8 to 14 of the outbreak revealed that the strongest spatial clustering was identified at the 7-day interval, although clustering over longer intervals (8~14 days) was also observed. We further discussed the importance of time period elapsed between FMD-suspected notice and the date of confirmation, and emphasized the necessity of region-specific and species-specific control measures.

• Women's Health Nursing
• /
• v.11 no.3
• /
• pp.218-224
• /
• 2005

Purpose: The Purpose of this study was to investigate the relationship between state anxiety and maternal fetal attachment of unmarried mothers in a welfare center. Methods: The subjects were 25 unmarried mothers in a welfare center. The data was collected through personal interviews using a questionnaire. The instruments used for this study were the modified Spielberger's state anxiety inventory and Cranley's Maternal-Fetal Attachment Scale. Data was analyzed descriptive statistics, mean, standard deviation, t-test and the pearson correlation coefficient with the SPSS computer program. Results: The age of the subjects ranged from 15 to 25, and their average age was 20.0. The mean score of state anxiety was 58.2. There was significant difference in the degree of maternal state anxiety between the group whose pregnancy was known by their family and the group whose pregnancy was hidden. The group whose pregnancy was known showed a low state anxiety score. There was a significant difference in the degree of maternal state anxiety by the gestational period. The group who were in the second and third gestational trimester showed lower state anxiety score than in the first trimester. The mean score of maternal-fetal attachment(MFA) was 64.9. There were significant differences in the degree of maternal fetal attachment, by an ultrasound scan experience. The most frequently practiced attachment item was "I think the fetus is able to feel(mean 3.8)". Unmarried mothers degree of state anxiety showed a negative correlation with the degree of maternal fetal attachment(r=-.25), but there was no significant difference between the two variables. Conclusions: The unmarried mothers made an effort in striving to reduce their high state anxiety and to enhance maternal fetal attachment. They also realize how to take care of their state anxiety.

• Journal of Oral Medicine and Pain
• /
• v.22 no.1
• /
• pp.167-181
• /
• 1997

The aim of this study was to investigate the relationship between velocity and factors which could affect the velocity of mandibular movement. For this study, 30 dental students without any masticatory signs and symptoms and 90 patients with temporomandibular disorders(TMD) were selected as the control group and the patients group, respectively. After determining Angle's classification and lateral guidance pattern of occlusion, clinical examination for TMD was perfomed. Velocity and distance of mandibular movements were recorded with BioEGN, reproducibility index of lateral excursions was evaluated by Pantronic(PRI) and BioEGN (BERI) activity in masticatory and cervical muscles were measured with BioEMG, and occlusal contact time and cross-arch unbalance(Total left-right statistics, TLR) on clenching were recorded with T-scan, respectively. The results of this study were as follows : 1. Velocity in the patients was faster than that in the controls in most mandibular movements, but on wide opening and closing movement, result was reverse. 2. Velocity on closing movements were faster than that on opening movements in the control group and a similar tendency was also shown in the patients group. 3. Patients with muscle disorders showed a tendency to have the highest value of velocity of all diagnostic subgroups, while patients with degenerative joint diseases showed a tendency to have the lowest value. 4. Patients with canine guidance showed a tendency to have the highest value of velocity in three subgroups by lateral guidance pattern, while patients with group function showed a tendency to have the lowest value. 5. BERI had a positive correlation with opening velocity on lateral excursion, while TLR had a negative correlation with opening velocity on swallowing. 6. EMG activity on clenching in masticatory muscles had negative correlation with opening velocity on border movements, and on swollowing, while the activity in rest correlated positively with opening velocity on border movements. 7. There were positive correlation between the velocity and the distance in long components of mandibular trajectory.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.33 no.1
• /
• pp.116-127
• /
• 2020

Objectives: The purpose of this study is to analyze csatisfaction with clinica1 training in the department of Korean Medicine Obstetrics and Gynecology and the related factors. Methods: All the students on the graduating class of school of Korean Medicine, Dong-Shin University must be trained for 1 year in the department of Korean Medicine Obstetrics and Gynecology according to clinical training guideline including Objective Structured Clinical Examination (OSCE). After completing clinical training, we distributed questionaries to them about a reflex of the object of study, usefulness, difficulty, satisfaction and preference. And then, we analyzed the related factors including descriptive statistics, frequency analysis and correlation analysis by SPSS 12.0. Results: In general, a reflex of the aim of study (7.31±1.59), satisfaction with contents (7.44±1.58), and difficulty (6.13±1.34) were evaluated restectively. There is no statistically significant difference with sex. There is a statistically significant positive correlation between a reflex of the aim of study and satisfaction with contents. The primary preferences of clinical practice were Clinic Training, Ward Training, PBL (Problem Based Learning), OSCE. In OSCE, a reflex of the aim of study (7.04±1.83) and usefulness (7.02±1.97) were highly evaluated. There is no statistically significant difference with sex. The primary preferences for clinical OSCE practice were breast examination, genital examination, ultrasound scan, and pap smear. Facilities and equipment (6.84±2.01), contents of clinical training (7.29±1.83), the handout (7.20±1.98) and time scheduling (7.29±1.90) were evaluated respectively in general composition of clinical training. Conclusions: Clinical training program in the department of Korean Medicine Obstetrics and Gynecology can be highly estimated from the viewpoint of satisfaction with clinical training and the related factors.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.15-24
• /
• 2013

Purpose: With the demand of SPECT/CT increasing, the interest in complex diagnostic information of CT is rising along with the expansion of various studies on potential performance value. But the study on reduction of exposure dose generated by CT is not being conducted enough. Therefore, in this study, the goal is to identify how much dose reduction exists when performing the extremity bone SPECT/CT using the flat-panel CT. Materials and Methods: The extremity bone SPECT/CT was performed with two equipments -BrightView XCT (Philips Healthcare, Cleveland, USA) and Brilliance 16 CT (Philips Healthcare, Cleveland, USA)-to identify the exposed dose and image quality resulted by changing scan parameter (mAs) applying for both equipment respectively. The noise value of image and spatial resolution were measured with AAPM CT phantom. Tube voltage (kVp) was fixed to 120 kVp, tube current (mAs) calculated at different mA (20, 30, 40, 50, 60, 70, 80) was applied to both equipments respectively. DLP (dose length product) were calculated at the same distance at respective mAs. Also, we acquired images and % contrast with NEMA IEC body phantom to confirm the effect on image. The output of statistics was analyzed by SPSS ver.18. Results: Regarding AAPM phantom, the noise decreased as the tube current (mAs) increased and flat-panel had less noise than Helical CT. This difference increased at lower dose exposure. As to the evaluation of spatial resolution, we can differentiate the space up to 0.75 mm with both equipments. With scan parameter (mA) growing, the value of DLP increased up to 54-216 mGy cm at flat-panel CT and up to 177-709 mGy cm at Helical CT. Regarding NEMA IEC body phantom, same sphere with varied parameter (mA) shows that similar results. Conclusion: There is no significant differences of image quality in both flat-panel and Helical CT when the scan parameter (mA) is changed respectively. Moreover, we can identify the reduction of exposure dose and confirm %contrast analysis value with maintaining image quality. Therefore, at the extremity bone SPECT/CT requiring high spital resolution without the wide ROI, the flat-panel CT is considered to be more useful and it expected to result in the similar image quality with lower exposure dose compared to Helical CT. Additionally, through this study, we expect to help the reduction of the unnecessary exposure dose.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.186-199
• /
• 2016

The shoe last which is the framework for the shoemaking is intensively combined with the 3D data and technologies. International shoe companies have already commercialized 3D printing technology in producing the shoe, but domestic shoe companies are still in their early stages. This study used the 3D scanning, 3D modeling and 3D printing of the high-technology to make the shoe last. This 3D producing processes should be helpful in building competitiveness in domestic shoe industry. The 3D foot scanning data of men in 30s(n=200) were collected in SizeKorea(2010). The basic statistics, factor and cluster analysis were performed. They were categorized in 3 groups by 3D foot measurement data, and the standard models were selected in each group. The cross sections in XY, YZ and XZ planes sliced from 3D scan data of the standard model were used in the sketches of the 3D shoe last modeling. The 3D shoe last was modeled by Solidworks CAD and printed by MakerBot Replicator2; a desktop 3D printer. This research showed the potential for utilization of 3D printing technology in the domestic shoe industry. The 3D producing process; 3D scanning, 3D modeling and 3D printing is expected to utilized widely in the fashion industry within the nearest future.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.732-743
• /
• 2008

In H.264/AVC, 4$\times$4 block transform is used for intra and inter prediction instead of 8$\times$8 block transform. Using small block size coding, H.264/AVC obtains high temporal prediction efficiency, however, it has limitation in utilizing spatial redundancy. Motivated on these points, we propose a multi-dimensional transform which achieves both the accuracy of temporal prediction as well as effective use of spatial redundancy. From preliminary experiments, the proposed multi-dimensional transform achieves higher energy compaction than 2-D DCT used in H.264. We designed an integer-based transform and quantization coder for multi-dimensional coder. Moreover, several additional methods for multi-dimensional coder are proposed, which are cube forming, scan order, mode decision and updating parameters. The Context-based Adaptive Variable-Length Coding (CAVLC) used in H.264 was employed for the entropy coder. Simulation results show that the performance of the multi-dimensional codec appears similar to that of H.264 in lower bit rates although the rate-distortion curves of the multi-dimensional DCT measured by entropy and the number of non-zero coefficients show remarkably higher performance than those of H.264/AVC. This implies that more efficient entropy coder optimized to the statistics of multi-dimensional DCT coefficients and rate-distortion operation are needed to take full advantage of the multi-dimensional DCT. There remains many issues and future works about multi-dimensional coder to improve coding efficiency over H.264/AVC.