• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.199-206
• /
• 2015

Regular high-strength carbon steel is currently the most commonly used pipe material for onshore and offshore pipelines. The corrosion of offshore pipelines is a major problem as they age. The collapse of these structures as a result of corrosion may have a heavy cost is lives and assets. Therefore, their monitoring and screening is a high priority for maintenance, which may ensure the integrity and safety of a structure. Monitoring risers and subsea pipelines effectively can be accomplished using eddy current inspection to detect the average remaining wall thickness of corroded low-alloy carbon steel pipelines through corrosion scaling, paint, coating, and concrete. A test specimen for simulating the offshore pipeline is prepared as a standard specimen for an analysis and experiment with differential bobbin eddy current sensors. Using encircling coils, the signals for the defect in the simulated specimen are analyzed and evaluated in experiments. Differential bobbin eddy current sensors can diagnose the defects in a specimen, and experiments have been carried out using the developed bobbin eddy current sensor. As a result, the most optimum coil parameters were selected for designing differential bobbin eddy current sensors.

• Wind and Structures
• /
• v.14 no.1
• /
• pp.15-34
• /
• 2011

Three wind-tunnel simulations of the atmospheric boundary layer (ABL) flow in suburban country exposure were generated for length scale factors 1:400, 1:250 and 1:220 to investigate scale effects in wind-tunnel simulations of the suburban ABL, to address recommended wind characteristics for suburban exposures reported in international standards, and to test redesigned experimental hardware. Investigated parameters are mean velocity, turbulence intensity, turbulent Reynolds shear stress, integral length scale of turbulence and power spectral density of velocity fluctuations. Experimental results indicate it is possible to reproduce suburban natural winds in the wind tunnel at different length scales without significant influence of the simulation length scale on airflow characteristics. However, in the wind tunnel it was not possible to reproduce two characteristic phenomena observed in full-scale: dependence of integral length scales on reference wind velocity and a linear increase in integral length scales with height. Furthermore, in international standards there is a considerable scatter of recommended values for suburban wind characteristics. In particular, recommended integral length scales in ESDU 85020 (1985) are significantly larger than in other international standards. Truncated vortex generators applied in this study proved to be successful in part-depth suburban ABL wind-tunnel simulation that yield a novel methodology in studies on wind effects on structures and air pollution dispersion.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.134-142
• /
• 1998

THe purpose of this study is to suggest the major determinants of visual preference in the outdoor spaces of urban office buildings. For this, the spatial image was analyzed by the factor analysis algorithm. The level of visual preferences was measured by a slide simulation test, and these data were analyzed by the multiple regressioni. The result of this study can be summarized as follows; Factors covering the spatial image were found to be 'mystery','changeability','coherence' and 'legibility'. T.V. was obtained as 58.4%. Outdoor spaces of urban office buildings were classified into four groups by the multi dimensional scaling method. As for the analysis of imageability in each spatial type, the factor scores of measuring high values were different for all types. Type II, IV obtained higher rank of visual preference and type III, I obtained lower. For all types, the factors of visual preference were found to be 'mystery','changeability','coherence' and 'legibility'. The visual preference determinants of urban setting focused on outdoor spaces of urban office buildings may be the major factors which must be considered in planning and designing as the functional basis for the quantitative analysis.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.72-74
• /
• 2003

Forest canopy density is an ideal representative of the forest habitat situations. It can directly or indirectly depict the canopy structure and gap size in the forestland, thus could be applied to assessment of wildlife’s diversit y. Since population survey of vegetation and wildlife diversities is a key issue for sustainable forest ecosystem management, many research efforts have been focused on forest canopy density using multispectral data in the last two decades. Unfortunately, prediction of canopy density using large scaling remote sensing data remains a challenging issue. Due to recent advances in hyperspectral image sensors hyperspectral imagery is now available for environmental monitoring. In this paper, we conduct experiments to monitor complicated environments of forestland that can be captured by using hyperspectral imagery and further be analyzed to test a prediction model of forest canopy density. The results show that 95% of canopy density could be well described by using 2 difference vegetation indices (DVIs), which are difference of blue and green reflectances rband_100-rband_150 and difference of 2 short wave infrared reflectancse rband_406-rband_410 With the wavelengths of band no. 100, 150, 406, and 410 specified by 462.39 nm, 534.40 nm, 918.22 nm and 924.41 nm respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.304-308
• /
• 2009

This paper presents the deadline driven CPU-Power management scheme for the Real-Time Embedded OS: named TMO-eCos. It used the scheduling scenarios generated by a task serialization technique for hard real- time TMO system. The serializer does a off-line analysis at design time with period, deadline and WCET of periodic tasks. Finally, TMO-eCos kernel controls the CPU speed to save the power consumption under the condition that periodic tasks do not violate deadlines. As a result, the system shows a reasonable amount of power saving. This paper presents all of these processes and test results.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.228-233
• /
• 2008

This study was carried out to get the genetic information on the germination rate and fat acidity after 12 weeks' storage at $35^{\circ}C$. Germination rate decreased with longer storage period, while fat acidity increased. Germination rate was higher in the order of Koshihikari, Hanmaeum and Unkwangbyeo after 12 weeks' storage at $35^{\circ}C$. Fat acidity of Koshihikari and Hanmaeum was gradually increased, but that of Unkwangbyeo was dramatically increased after 4 weeks' storage at $35^{\circ}C$. The genetic mode on germination rate and fat acidity using the joint scaling test was shown to be additive-dominance gene effects. Additive([d]) effect was higher than dominance effect([h]) in all crosses. The average degree of dominance, [h]/[d], was less than 1, indicating that germination rate and fat acidity was partially dominant. Germination rate and fat acidity based on frequency distribution of 2 crosses were quantitative characters expressed by polygenes.

• Integrative Medicine Research
• /
• v.6 no.3
• /
• pp.254-259
• /
• 2017

Background: Those classified as Tae-Eum (TE)-type people in Sasang constitutional medicine (SCM) are prone to obesity. Although extensive clinical observations have confirmed this tendency, the underlying physiological mechanisms are unknown. Here, we propose a novel hypothesis using integrative physiology to explain this phenomenon. Methods: Hypoactive lung function in the TE type indicates that respiration is attenuated at the cellular level - specifically, mitochondrial oxygen consumption. Because a functional reduction in cellular energy metabolism is suggestive of intrinsic hypoactivity in the consumption (or production) of metabolic energy, we reasoned that this tendency can readily cause weight gain via an increase in anabolism. Thus, this relationship can be derived from the graph of cellular metabolic power plotted against body weight. We analyzed the clinical data of 548 individuals to test this hypothesis. Results: The statistical analysis revealed that the cellular metabolic rate was lower in TEtype individuals and that their percentage of obesity (body mass index >25) was significantly higher compared to other constitutional groups. Conclusion: Lower cellular metabolic power can be an explanation for the obesity trend in TE type people.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1218-1230
• /
• 2019

A sub-channel solver, named ${\underline{S}}teady$ and ${\underline{T}}ransient$ ${\underline{A}}nalyzer$ for ${\underline{R}}eactor$ ${\underline{T}}hermal$ hydraulics (START), has been developed using the homogenous model for two-phase conditions of light water reactors. The code is developed as a fast and accurate TH-solver for coupled and multi-physics calculations. START has been validated against the NUPEC PWR Sub-channel and Bundle Test (PSBT) database. Tests like single-channel quality and void-fraction for steady state, outlet fluid temperature for steady state, rod-bundle quality and void-fraction for both steady state and transient conditions have been analyzed and compared with experimental values. Results reveal a good accuracy of solution for both steady state and transient scenarios. Axially different values for turbulent mixing coefficient are used based on different grid-spacer types. This provides better results as compared to using a single value of turbulent mixing coefficient. Code-to-code evaluation of PSBT results by the START code compares well with other industrial codes. The START code has been parallelized with the OpenMP algorithm and its numerical performance is evaluated with a large whole PWR core. Scaling study of START shows a good parallel performance.

• International Journal of Advanced Culture Technology
• /
• v.8 no.4
• /
• pp.306-317
• /
• 2020

This study aimed to identify the factors affecting elderly care willingness (ECW) of nursing students. A total of 313 nursing students participated in the study. Data were collected from May to June 2019 using Interpersonal Reactivity Index-Korean version, Semantic Differential Scaling for evaluating attitudes toward elders, Scale of Ageism, and Questionnaire for care willingness toward older adults. Data were analyzed by t-test, ANOVA, Pearson's correlation coefficient, and multiple regression using SPSS 21.0 Program. The factors with the most significant influence on the elderly care willingness was prejudice toward the elderly (β=-.30, p=.001), followed by attitude toward the elderly (β=-.25, p=.004), third year (β=-.23, p=.016), satisfaction with volunteer experience with the elderly (β=-.21, p=.008), satisfaction with nursing major (β=-.17, p=.032), and empathy (β=.16, p=.046). These factors explained 46% of the elderly care willingness. In conclusion, it is necessary to reduce prejudice against the elderly and develop positive attitudes toward the elderly to increase the willingness of nursing students to care for older adults. In particular, further study is required to increase the willingness of nursing students to care for the elderly through developing programs such as curriculums for positive contact experiences with the elderly and volunteer activities for the elderly.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.382-390
• /
• 2021

The present study suggests the application of a depth camera for wave height field measurement, focusing on the calibration procedure and test setup. Azure Kinect system is used to measure the water surface elevation, with a field of view of 800 mm × 800 mm and repetition rate of 30 Hz. In the optimal optical setup, the spatial resolution of the field of view is 288 × 320 pixels. To detect the water surface by the depth camera, tracer particles that float on the water and reflects infrared is added. The calibration consists of wave height scaling and correction of the barrel distortion. A polynomial regression model of image correction is established using machine learning. The measurement results by the depth camera are compared with capacitance type wave height gauge measurement, to show good agreement.