Scale-up experiments for hydrolysis of beef tallow, fat, and palm kernel with lipase derived from Candida cylindracea were carried out in 1-1, 100-1, and 10,000-1 reactors. The optimum agitation speed for the hydrolysis of the 1-1 reactor was investigated and found to be 350rpm, and this was a basis for the scale-up of agitation speed. The hydrolysis system in this work was the oil-water system in which the hydrolysis seems to process a heterogeneous reaction. An emulsion condition was the most important factor for determining the reaction rate of hydrolysis. Therefore, the scale-up of agitation speed was performed by using the power n = 1/3 in an equation of the rules of thumb method. The geometrical similarity for scaling-up turned out to be unsatisfactory in this study. Thus, the working volume per one agitator was used for the scale-up. In the case of scale-up from a 1-1 reactor to a 100-1 reactor, the hydrolysis of palm kernel was very much scaled-up by initiating the rules of thumb method. However, the hydrolysis of fat and beef tallow in a 100-1 reactor was a little higher than that of the 1-1 reactor because of the difference of geometrical similarity. The scale-up of hydrolysis from the 100-1 reactor to the 10,000-1 reactor was improved compared to that of the 1-1 to 100-1 reactor. The present results indicated that the scale-up of hydrolysis in the oil-water system by the rules of thumb method was more satisfactory under the condition of geometrical similarity. Even in the case where geometrical similarity was not satisfactory, the working volume per one agitator could be used for the scale-up of a heterogeneous enzyme reaction.
With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.
Brand personality is the human-like traits of brands that consumers can use to identify brands. Despite the importance of brand personality, there has been limited research about it in Korea recently, especially for casual apparel brands. Considering the changes in lifestyle and the increasing popularity of leasure activities in Korea, it is important to analyze the brand personality of casual brands for understanding Korean consumers. This study aimed to analyze the brand personalities of eight well-known casual brands in Korea, and to investigate the relationship between the brand personalities and brand preference. Specifically, this study questioned whether the similarity in brand personalities leads to similar patterns of preference for the brands. The eight brands were carefully selected so that they can well represent the diversity in the dimensions of perceived brand personality, while also being well-known to the participants of the survey. Factor analysis of the data from the survey of Korean university students yielded five factors of brand personality: liveliness, high class, ordinariness, rationality, and reliability. The eight brands showed significant difference across the five factors. Multidimensional scaling analyses of the brands were conducted based on the similarity in brand personality and brand preference respectively. The result showed significant difference in the relative distribution of the eight brands in the two-dimensional space of the analyses.
This paper presents a novel precast energy dissipation shear wall (PEDSW) structure system that using mild steel dampers as dry connectors at the vertical joints to connect adjacent wall panels. Analytical studies are systematically conducted to investigate the seismic performance of the proposed PEDSW under sequence-type ground motions. During earthquake events, earthquake sequences have the potential to cause severe damage to structures and threaten life safety. To date, the damage probability of engineering structures under earthquake sequence has not been included in structural design codes. In this study, numerical simulations on single-story PEDSW are carried out to validate the feasibility and reliability of using mild steel dampers to connect the precast shear walls. The seismic responses of the PEDSW and cast-in-place shear wall (CIPSW) are comparatively studied based on nonlinear time-history analyses, and the effectiveness of the proposed high-rise PEDSW is demonstrated. Next, the foreshock-mainshock-aftershock type earthquake sequences are constructed, and the seismic response and fragility curves of the PEDSW under single mainshock and earthquake sequences are analyzed and compared. Finally, the fragility analysis of PEDSW structure under earthquake sequences is performed. The influences of scaling factor of the aftershocks (foreshocks) to the mainshocks on the fragility of the PEDSW structure under different damage states are investigated. The numerical results reveal that neglecting the effect of earthquake sequence can lead to underestimated seismic responses and fragilities, which may result in unsafe design schemes of PEDSW structures.
Objectives: The purpose of this study was to investigate the possible impact factors(oral health level, oral health promotion behaviors, health level, health behaviors, and mental health) on oral health related quality of life using OHIP-14 of health allied college students. Methods: A total of 363 self-administered questionnaires were collected from university student in Seoul. To investigate the casual relationship between each variable presented in the research model, descriptive statistics, t-test, one-way ANOVA(Scheffe's test), man-whitney, kruskal wallis, multiple regression analysis were carried out by using SPSS ver. 21.0 Results: The study shows that the students reported mean score of OHIP-14 ($8.32{\pm}7.51$), of which physical pain was the highest score($1.88{\pm}1.45$) and social disability was the lowest score($0.69{\pm}1.13$). Multiple regression revealed that the score of OHIP-14 was shown to be significantly higher for the following people: who were get more self-reported symptom of periodontitis, halitosis, negative self-perceived general health and oral health, no received dental scaling treatment, and participants who had no experience awareness of distress in two weeks. The explanatory power was 18.2%. The most powerful factor regarding to self-reported symptom of periodontitis was shown to be negatively relations oral health-related quality of life. Conclusions: In order to enhance the students' life quality, there need to be considered for a comprehensive oral health-related quality of life program for the students through health education policy.
원자력발전소의 특성에 따라 서로 다른 방사성 폐기물의 핵종 재고량 평가에 필요한 척도인자와 주기적 검증방법을 개발하기 위하여 규제 대상의 핵종으로 검토되고 있는 다수의 핵종 중에서 개별분리가 요구되는 $^{55}Fe$, $^{90}FSr$ 및 $^{94}Nb$을 공존 핵종들로부터 선택적으로 분리, 회수할 수 있는 방법에 관하여 기술하였다. 고ㆍ액체 방사성 폐기물과 유사한 화학조성의 모의 방사성 폐기물 용해용액을 사용하여 이온교환수지법과 추출 크로마토그래피로 Fe, Sr, Nb 및 공존원소들의 흡ㆍ탈착거동을 조사하였다. 방사성 폐액의 발생과 분석자의 방사선 피폭을 최소화하기 위하여 한 개의 시료로부터 각 핵종을 순차적으로 회수하도록 분리조건을 최적화하였으며 확립된 분리조건에서 회수율을 측정하고 신뢰도를 평가했다.
Wan Mohtar, Yusoff;Massadeh, Muhannad Illayan;Kader, Jalil
Journal of Microbiology and Biotechnology
/
제10권6호
/
pp.770-775
/
2000
Several process parameters were studied to ascertain the effect on degradation of sugar cane bagasse in relation to the production of cellulase enzyme and reducing sugars by Solid Substrate Fermentation (SSF) and Submerged Culture Fermentation (SCF) of Aspergillus terreus SUK-1. The effect of air-flow rate (0-1.3 v/v/m), of different ratios of substrate weight to liquid volume (1:6, 1:10, 1:20, and 1:30 w/v, g/ml), scale-up effect (10, 20, and 100 times of 1:10 ration, w/v) and the effect of temperature (30, 40, 50, and $60^{\circ}C$) in SSF were studied. Air-flow rate of 1.0 v/v/m gave the highest enzyme activity (FPase 0.25 IU/ml, CMCase 1.24 IU/ml) and reducing sugars concentration (0.72 mg/ml). Experiment using 1:10 ratio (w/v) was found to support maximum cellulase activity (FPase 0.58 IU/ml, CMCase 1.97 IU/ml) and reducing sugar concentration (1.23 mg/ml). Scaling-up the ratio of 1:10(w/v) by a factor of 20 gave the highest cellulase activity (FPase 0.71 IU/ml, CMCase 2.25 IU/ml) and reducing sugar concentration (3.67 mg/ml). The optimum temperature for cellulase activity and reducing sugar production was $50^{\circ}C$(FPase 0.792 IU/ml, CMCase 2.25 IU/ml and 3.85 mg/ml for reducing sugar concentration). For SCF, the activity of cellulase enzyme and reducing sugar concentration was found to be lower than that obtained for SSF. The highest cellulase activity obtained in SCF was 50% lower than the highest cellulase activity in SSF, while for reducing sugar concentration, the highest concentration obtained in SCF was 90% lower than that obtained in SSF.
지반-유체-구조물 시스템에 대한 1g 진동대 실험을 위한 상사법칙의 유효성을 검증하기 위하여 일련의 모형실험을 수행하였다. 크기가 서로 다른 3가지의 모형에 대한 실험결과 분석에는 lai가 제안한 상사법칙뿐만 아니라 과잉간극수압 발생을 위한 정상상태개념도 적용하여 각 크기의 모형이 예측하는 안벽시스템의 거동을 서로 비교하였다. 그 결과, 가속도와 과잉간극수압, 그리고 변위 응답의 경우, 가장 작은 모형벽체와 가장 큰 모형벽체는 비슷한 값을 예측한 반면, 중간크기의 모형벽체는 공진현상으로 인해 엉뚱하게 큰 값을 예측하였다. 또한 벽체의 수직침하와 회전각은 모형의 크기와 관계없이 모형벽체시스템의 크기가 증가할수록 증가하는 경향을 나타내었다.
Objectives: Smoking is related to periodontal disease and periodontal therapy. So the aim of this study was to investigate the effects of professional tooth cleaning and plaque control instruction (PT & PCI) for smoking behavior. Methods: A total of 151 adults were investigated using the O'Leary Plaque Index (PI), $L\ddot{o}e$ & Silness gingival index (GI) and the number of sextants possessing periodontal pocket (SPP). And adults were given a through dental scaling and Watanabe method for dental plaque control. Follow up examination were conducted after 3 months and compared the pre and post- status. The collected data were analyzed with t-test, paired t-test and one-way analysis of variance. Results: Regardless of smoking behavior, improving effects were identified after PT & PCI on PI, GI and SPP in the whole population. However, the effects of GI improvement were significant in the smoking group alone; those of PI improvement were most significant in the non-smoking group; and those of SPP improvement were more significant in non-smoking and pre-smoking groups than in the smoking group. The shorter period of smoking and the smaller amount of smoking, the greater effects of PT & PCI by smoking-related characteristics. Conclusion: Smoking cessation instruction should necessarily be included in oral health education in that smoking is an important factor to consider in prevention of periodontal diseases and periodontal therapies.
Putrefactive activity within the oral cavity is the principal cause of halitosis. The most common intraoral sites of oral malodor production are tongue, interdental and subgingival areas. The other foci may include faulty restorations, sites of food impaction and abscesses. Periodontal disease frequently involves pathological oral malodor, which is caused mainly by volatile sulfur compounds(VSC), such as hydrogen sulfide, methyl mercaptan, and dimethyl sulfide. The purpose of this study is to evaluate the association between oral malodor and periodontal status. Volatile sulfur compounds in mouth air were estimated by portable sulfide monitor($Halimeter^{TM}$). The results were as follows : 1. The levels of volatile sulfur compounds were significantly greater in a periodontitis group than in a control group(P<0.01). The amounts of VSC in mouth air from patients with periodontal involvement were four times greater than those of the control group. 2. The significant positive correlation was found between VSC concentrations and the number of pocket depth above 4mm(P<0.01), but correlation between VSC concentrations and plaque score was not statistically significant(P>0.05). 3. In the periodontitis group, VSC concentrations of pre-treatment significantly decreased after scaling and root planing(P<0.01). 4. No statistically significant correlation was found between VSC concentrations and sex / age in the periodontitis group. The above results indicate that periodontal disease may play a role as an important factor of oral malodor and deep periodontal pockets are a source of volatile sulfur compounds.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.