• 터널과지하공간
• /
• 제14권1호
• /
• pp.54-68
• /
• 2004

본 연구에서는 경제성장기에 고층 구조물 시공에서 널리 사용된 철근콘크리트(RC, Reinforced Concrete) 구조물을 대상으로 발파해체 축소모형실험을 수행하고 전산실험결과와 이를 비교하였다. 발파해체 공법으로는 파괴거동을 비교적 쉽게 확인할 수 있는 점진붕괴공법을 적용하였으며, 축소모형실험은Hobbs(1969)에 의한 축소율의 개념에 따라 차원해석을 실시하여 축소된 강도특성을 계산하였다. 사용재료로는 석고, 모래, 물의 혼합액을 콘크리트 대용으로 사용하였다. 모래와 석고의 중량 비를 다양하게 변화시키면서 이에 따른 강도의 변화를 측정하고 최적의 강도 값을 갖는 배합 비를 결정하였다. 또한 연성을 가지고 있으며 축소강도로 비교할 때 철근과 유사한 특성을 지니는 땜용 납선을 철근대용 재료로 사용하였다. 수치해석 프로그램으로는 요소의 파괴거동을 육안으로 확인할 수 있는 개별 요소법(DEM Distinct Element Method)에 의해 수행되는 상용코드인 PFC2D(Particle Flow Code 2-Dimension)을 사용하였다. 모형의 제작은 실내에서 미리 양생된 부재들을 현장으로 옮겨 연결부만을 타설하여 일체화시키는 방법으로 이루어졌다. 먼저 3차원 무근 콘크리트 라멘 구조의 모형을 설계하고 그 축소 모형을 발파해체하여 그 거동을 촬영하였다. 이를 수치적인 해석과 비교하는 과정을 통해 2차원 해석이라는 한계성은 존재하지만 대체로 유사한 형태의 거동을 보임을 알 수 있었다. 사전해석의 경험과 RC 보의 실내 굴곡 실험결과를 근거로 하여 RC 구조모형의 발파해체 사전해석을 실시하였다. 시차는 200㎳로 하여 점진적으로 붕괴되도록 설계하였다. 모형실험과는 달리 2차원 해석이라는 한계에도 불구하고 900㎳까지 매우 유사한 거동을 보이며 붕괴되었다.

• 청정기술
• /
• 제25권1호
• /
• pp.74-80
• /
• 2019

하수슬러지의 열화학적 처리는 수분을 제거하여 연료로 사용되는 하수슬러지의 수분 함량을 낮추어 주는 기술이다. 열화학적 처리된 하수슬러지는 열량이 높아지기 때문에 에너지 집약적 과정이라고 할 수 있다. 이러한 공정 중에 소비되는 에너지를 절약하기 위해 하수슬러지의 수열 탄화 공정을 사용하였다. 수열탄화 공정은 하수슬러지를 사전 건조 없이 깨끗한 고체연료로 전환할 수 있다. 본 연구는 수열탄화 하수슬러지와 미분탄 연소 시스템의 혼소 특성을 조사하는 것을 목적으로 한다. 혼소 시 생성되는 유해물질 및 연소 효율의 변화를 측정하는 것을 목적으로 한다. 본 연구에 사용 된 연소 시스템은 $80kW_{th}$급 연소로로서 1기의 선회류 버너가 장착되어 있다. 두 가지의 석탄을 주 연료로 사용하였고, 하수슬러지의 혼소율은 열량 기준 0% ~ 10%까지 진행하였다. 실험 결과 $NO_x$는 400 ~ 600 ppm, $SO_x$는 600 ~ 700 ppm 사이를 유지하였고, CO는 100 ppm 전후로 일정하게 유지되어 안정적인 연소를 확인할 수 있었다. 하수슬러지를 혼소할 경우, 혼소율이 증가할수록 $NO_x$와 $SO_x$의 배출량도 증가하였으나 그 편차가 크지 않았다. 연소 배가스에 포함된 오염 물질 배출은 혼소 비율 보다 주 연료인 석탄의 조성에 의해 크게 영향을 받는 것으로 밝혀졌다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 2009

본 연구는 GE 7FA+e DLN 2.6 가스터빈 연소기를 축소 제작한 모형 가스터빈 연소기의 연소 동특성 및 연소불안정 현상을 알아보고 위해 진행되었다. 모형 연소기에 사용된 연료노즐은 1/3 크기로 상사하여 제작되었으며, 실제 연료노즐과 동일한 2단 스월러(swirl vane)를 가지고 있다. Plenum과 연소기의 형상은 실 가스터빈과 유사한 음향학적 특성을 가질수 있도록 설계되었다. 실험은 공기온도 $200{\sim}400^{\circ}C$, 대기압, 노즐출구 속도 $30{\sim}75\;m/s$, 당량비 $0.4{\sim}1.2$, 연소실 길이 $375{\sim}700\;mm$,에서 이루어졌으며, 그 결과 소염영역 근처의 저 당량비 영역과 당량비 1.1 이상인 연료 과농 상태에서 연소 불안정 현상이 관찰 되었다.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.551-561
• /
• 1998

This paper was studied to understand the characteristics of heat transfer coefficients and surface temperature distributions around a circular combustion chamber within the heat-intercept duct of kerosene fan heater. The experiment was carried out in the heat-intercept duct of kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of 240 mm * 240 mm * 1200 mm. The purpose of this paper was to obtain the basic data related with normal combustion for new design from conventional kerosene fan heater, and to investigate the effect of surface temperature, local and mean heat transfer coefficients versus flow-rate of convection axial fan according to the variations of heat release conditions from kerosene fan heater during normal combustion. Consequently it was found that (i) the revolution of convection axial fan during combustion had a smaller value than that of non-combustion because of the thermal resistance due to the high temperature in the heat-intercept duct, (ii) the pressure ratio P$_{2}$/P$_{1}$ had a comparatively constant value of 0.844 according to the revolution increase of turbo fan and the heating performance of kerosene fan heater had a range of 1,494 ~ 3,852 kcal/hr, (iii) the local heat transfer coefficient around a circular combustion chamber had a comparatively larger scale in the range of 315 deg. < .theta. < 45 deg. than that in the range of 90 deg. < .theta. < 270 deg. as a result of heat transfer difference between front and back of a circular combustion chamber, and (iv) the mean heat transfer coefficient around a circular combustion chamber increased linearly like a H$_{m}$=95.196Q+104.019 in condition of high heat release according to the increase of flow-rate of axial fan.n.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.477-484
• /
• 2013

이 연구에서는 순환골재와 고로슬래그 미분말의 치환율에 따른 강섬유 보강 RC보의 구조성능 향상을 위하여 표준실험체(BSS), 성능개선 실험체로는 순환골재와 고로슬래그 미분말을 치환한 실험체(BRS시리즈), 순환골재와 고로슬래그의 치환율에 강섬유를 보강한 실험체(BSRS시리즈)로 총 11개의 실험체를 1/2축소 제작하여 실험을 수행하였다. 실험을 통하여 얻어진 결과를 비교 분석하여 하중-변위, 파괴형태, 최대내력 등을 규명함으로써 구조성능의 개선정도를 평가하였다. 실험 결과 순환골와 고로슬래그 미분말을 치환한 콘크리트에 강섬유를 보강한 실험체(BSRS시리즈)의 경우 표준실험체(BSS)보다 압축강도는 최대 9%, 최대내력은 1~6%, 연성능력은 각각 1.02~1.13배 증가하는 결과를 나타내었다. 또한, 충분한 연성적인 거동과 안정적인 휨인장 파괴를 나타내었다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• 보건행정학회지
• /
• 제18권3호
• /
• pp.110-127
• /
• 2008

Expenditures on pharmaceuticals of different concepts were estimated and their functional, financing and providers' breakdowns were examined in line with the OECD's System of Health Accounts (SHA) manual. This study also shows the way such estimates are made. The results are then analyzed particularly from the international perspective. Data from both Household Survey by the National Statistical Office and the National Health and Nutritional Survey by the Ministry of Health and Welfare of Korea were used to estimate pharmaceutical expenditures that. are financed by out-of-pocket payments of the household, while national health insurance data etc. were used for estimation of pharmaceutical expenditures that are financed by public funding sources. The 'per capita expenditure on pharmaceutical/medical non-durables' in Korea stood at 380 US$ PPPs, less than the OECD average of 443 US$ PPPs in 2006, but its share of the per capita health expenditure of 25.9% noticeably outnumbered the OECD average of 17.1%, due partly to low per capita health expenditure as a denominator of the ratio. This indicates that Koreans tend to spend less on health care than an OECD average, while tending to spend more on pharmaceuticals than on other health care services, much like the pattern found in relatively low income countries. An international pharmaceuticals pricing mechanism is most likely responsible for such a tendency. In addition, it is to be noted that the percentage comes down to 21.0%, when expenditures on both medical non-durables and herbal medicine, which is locally quite popular among the elderly, have been excluded.

• Nutrition Research and Practice
• /
• 제13권6호
• /
• pp.521-528
• /
• 2019

BACKGROUND/OBJECTIVES: The aim of this study was to develop Korean food image detection and recognition model for use in mobile devices for accurate estimation of dietary intake. MATERIALS/METHODS: We collected food images by taking pictures or by searching web images and built an image dataset for use in training a complex recognition model for Korean food. Augmentation techniques were performed in order to increase the dataset size. The dataset for training contained more than 92,000 images categorized into 23 groups of Korean food. All images were down-sampled to a fixed resolution of $150{\times}150$ and then randomly divided into training and testing groups at a ratio of 3:1, resulting in 69,000 training images and 23,000 test images. We used a Deep Convolutional Neural Network (DCNN) for the complex recognition model and compared the results with those of other networks: AlexNet, GoogLeNet, Very Deep Convolutional Neural Network, VGG and ResNet, for large-scale image recognition. RESULTS: Our complex food recognition model, K-foodNet, had higher test accuracy (91.3%) and faster recognition time (0.4 ms) than those of the other networks. CONCLUSION: The results showed that K-foodNet achieved better performance in detecting and recognizing Korean food compared to other state-of-the-art models.

• 대한통합의학회지
• /
• 제8권4호
• /
• pp.241-251
• /
• 2020

Purpose : This study examined the effect of locomotive syndrome on stress index and lifestyle patterns among elderly Koreans aged 65 years and older, and analyzed its correlation with stress index and lifestyle patterns. The purpose of this study was to provide basic data for the management and prevention of locomotive syndrome in the elderly. Methods : Using the "25-Question Geriatric Locomotive Function Scale (GLFS-25)", the study evaluated locomotive syndrome in 123 elderly Koreans aged 65 years and older. Of them, 85 patients were assigned to the locomotive syndrome group and 38 patients were assigned to the normal group. The questionnaire measured and investigated the participants' stress index and lifestyle patterns. Statistical analysis was performed using SPSS 22.0 ver. Results : Results showed the locomotive syndrome group displayed a higher stress index than the normal group, with a statistically significant difference between the two groups. The group also scored lower in the lifestyle pattern survey than the normal group did, with a statistically significant difference in high-intensity work performance ratio and average daily performance time between them. The GLFS-25 score showed a significant positive correlation with the stress index and sitting and lying down time, and a significant negative correlation with medium-intensity working time, walking, and cycling time. Conclusion : In conclusion, Locomotive syndrome in elderly Koreans is closely related to stress and lifestyle patterns, especially high-intensity work. We recommend active prevention and management of locomotive syndrome and further research into the effects of various lifestyle factors on the illness.

• 천문학회보
• /
• 제44권2호
• /
• pp.68.1-68.1
• /
• 2019

Turbulence plays a crucial role in controlling star formation as it produces density fluctuation as well as non-thermal pressure against gravity. Therefore, turbulence controls the mode and tempo of star formation. However, despite a plenty of previous studies, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped the Orion A and the Ophiuchus clouds, in three sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) with a high-velocity resolution (~0.1 km/s) using the TRAO 14-m telescope. The mean Trms for the observed maps are less than 0.25 K, and all these maps show uniform Trms values throughout the observed area. These homogeneous and high signal-to-noise ratio data provide the best chance to probe the nature of turbulence in two different star-forming clouds, the Orion A and Ophiuchus clouds. We present comparisons between the line intensities of different molecular tracers as well as the results of a Principal Component Analysis (PCA).