• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.69-75
• /
• 2020

This study was conducted to improve the solid-liquid separation efficiency of clarifiers. To do so, the study did a bio-flocculation experiment simply by controlling the stirring speed (rpm) and baffle angle of a clarifier on a lab scale, but without using a coagulant. For the purpose of the experiment, the feed wall of a clarifier was so improved that a baffle could be installed on the clarifier. Then, it was ensured to change its stirring speed (to 0.0rpm, 0.6rpm, and 1.2rpm), with the angle fixed at 10°. As a result, it was found that concentration efficiency increased by 2.0%, and effluent removal efficiency (SS concentration) by 7.8%, at a stirring speed of 0.6ppm. This indicates the bio-coagulation efficiency of sludge increased with changing stirring speeds. Then, the baffle angle of the sedimentation unit was changed to analyze how the changed baffle angle would affect the sedimentation of sludge. As a result, it was found that the compression of sludge interface was very effective at a baffle angle of 20°. It is hoped that these experimental findings will be useful in improving the sedimentation efficiency of circular clarifiers.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.410-413
• /
• 2000

Lab-scale trickling bioreactor(TBR) containing the biofilm of Pseudomonas cepacia G4 was developed for the treatment of trichloroethylene(TCE) in a waste gas stream. The effect of phenol feeding on the efficiency of TCE biodegadation in TBR was investigated with the change of inlet phenol concentration from 0 to 4.71 ppm. When 0.94 ppm of phenol was supplied, the best performance of TBR was maintained with the TCE removal efficiency of 58.1%. These results showed that the appropriate supply of phenol could stimulate TCE removal efficiency in TBR.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.141-153
• /
• 2016

This study estimates the productivity change of pharmaceutical industry and decompose the change into technical efficiency change and technological change to explore ways to improve the productive efficiency. Unlike most previous studies, this study employs the non-radial and non-oriented slacks-based Malmquist productivity index which can deals directly with the input excesses and output shortfalls. In addition a smoothed bootstrap method is applied to estimate statistical confidence intervals for the Malmquist Index and its components. For the empirical analysis a balanced panel data set is constructed covering ten years over the period from 2005 to 2014. The input variables used in this study are number of workers, tangible assets and major production cost. The gross production is selected as a main output variable. The empirical results suggest that the productivity of pharmaceutical industry has decreased due mainly to decline in the technological progress rather than improvements in technical efficiency. An analysis result shows that the scale efficiency outweighs the pure efficiency in determining the technical efficiency of pharmaceutical industry. Therefore, in order to enhance the competitiveness of domestic pharmaceutical industry, it is important to continue supporting policies to promote the technology innovation capability through efficient R&D investment and industry reform strategy.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.1-26
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.5-14
• /
• 2013

Purpose - We live in a world of constant change and competition. Many airports have specific competitiveness goals and strategies for achieving and maintaining them. The global economic recession, financial crises, and rising oil prices have resulted in an increasingly important role for facility investment and renewal and the implementation of appropriate policies in ensuring the competitive advantage for airports. It is thus important to analyze the factors that enhance efficiency and productivity for an airport. This study aims to determine the efficiency levels of 20 major airports in East Asia, Europe, and North America. Further, this study also suggests suitable policies and strategies for their development. Research design, data, and methodology - This paper employs the DEA-CCR, DEA-BCC, and DEA-Malmquist production index analysis models to determine airport efficiency. The study uses data on the efficiency and productivity of the world's leading airports between 2006 and 2010. The input variables include the airport size, the number of runways, the size of passenger terminals, and the size of cargo terminals. The output variables include the annual number of passengers and the annual cargo volume. The study uses basic data from the 2010 World Airport Traffic Report (ACI). The world's top 20 airports (as rated by the ACI report) are investigated. The study uses the expanded DEA Model and the Super Efficiency Model to identify the most effective airports among the top 20. The Malmquist productivity index analysis is used to measure airport effectiveness. Results - This study analyzes longitudinal and cross-sectional data on the world's top 20 airports covering 2006 to 2010. A CCR analysis shows that the most efficient airports in 2010 were Gatwick Airport (LGW), Zurich Airport (ZRH), Vienna Airport (VIE), Leonardo da Vinci Fiumicino Airport (FCO), Los Angeles International Airport (LAX), Seattle-Tacoma Airport (SEA), San Francisco Airport (SFO), HongKong Airport (HKG), Beijing Capital International Airport (PEK), and Shanghai Pudong Airport (PVG). We find that changes in airport productivity are affected more by technical factors than by airport efficiency. Conclusions - Based on the study results, we offer four airport development proposals. First, a benchmark airport needs to be identified. Second, inefficiency must be reduced and high-cost factors need to be managed. Third, airport operations should be enhanced through technical innovation. Finally, scientific demand forecasting and facility preparation must become the focus of attention. This paper has some limitations. Because the Malmquist productivity index is based on the hypothesis of the, the identified production change could be over- or under-estimated. Further, as DEA estimates the relative efficiency. It also cannot generalize to include all airport conditions because the variables are limited. To measure airport productivity more accurately, other input variables and environmental variables such as financial and policy factors should be included.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.597-606
• /
• 2019

Due to climate change, coastal areas are being flooded with torrential rain, typhoons, and tsunamis. In addition, non-point source pollutants (NPSs) that accumulated on the ground, streets, and buildings during the dry season are washed off by rain and stormwater runoff, which adds to the damage associated with environmental pollution, e.g., pollution that makes its way into the ocean. Recently, low impact development (LID) has been considered as a means of controlling water circulation and NPSs. In the coastal area, permeable blocks have been constructed mainly to reduce the flood damage caused by waves. Some important design factors that must be considered to ensure long-term performance are the permeability coefficient, clogging, and the efficiency of the removal of total suspended solids (TSS), but currently there are no standardized design criteria or testing techniques that are used worldwide. Herein, we analyzed the permeability coefficient and the TSS removal efficiency tendency according to the permeability area ratio with an easily-detachable, permeable block filled with calcinated yellow soils as the filter media. Our lab-scale tests indicated that, when the permeability area ratio was 25%, the reduction of the permeability coefficient after clogged was 11%, which was a significant decrease compared to other cases. Permeability persistence increased when the permeability area ratio increased from 50% to 75%. The TSS removal efficiency decreased as the permeability area ratio increased. Our pilot-scale test indicated that the TSS removal efficiency was more than 80% higher in all cases. We also found that the permeability persistence was excellent as the permeability area ratio increased, and, in actual construction, it is effective to set 5.3% of the total area as permeable area in terms of permeability and economic feasibility.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.571-580
• /
• 2014

Korea's water supply efficiency is low, due to weak industrial structure, such as small scale, regional disparities in the management and services, unreasonable problem in a use and management of interregional water resources. This study investigated changes in the productivity of Jeollabuk-do local water supply service by using analysis of efficiency by data envelopment analysis and Malmquist Index Analysis. As a result, 6 office is showed that the value of scale efficiency is 1 and productivity index per gun in mainly seemed below average. Therefore these offices should strive to increase their productivity. This study is differentiated from earlier studies in the aspect of measuring change of productivity by not only DEA but also Malmquist productivity analysis. Therefore it will contribute to increase productivity of water supply in Jeollabuk-do.

• Korea Trade Review
• /
• v.43 no.4
• /
• pp.155-175
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.60-67
• /
• 2012

Government Geothermal Cooling-Heating Projects has made efforts to reduce GHG(Greenhouse Gas) emissions and to manage cost of greenhouse farm households. This study evaluated the economic benefits of heating load rate of change by comparing Geothermal Cooling-Heating System with the existing system(greenhouse diesel heating) in the Government Geothermal Cooling-Heating Projects. Economic analysis results shows that, 1) When installing the Cooling-Heating system according to the ratio of 70% heating load in policy standards, the geothermal cooling-heating system has economic efficiency with greenhouse type or scale independent because the investment cost is recovered within 7 years. And It was more economic efficiency the ratio of 50% heating load than70% heating load. 2) When installing the Cooling-Heating system according to the glass greenhouse of the ratio of 90% heating load, pay period of investment cost is recovered within 5 years. Therefore it is necessary to apply flexible heating sharing according to greenhouse type or scale.