KIEE International Transactions on Power Engineering
/
제4A권4호
/
pp.207-213
/
2004
In this paper, the on-line volt/var control algorithms of the Load Tap Changer (LTC) transformer and Shunt Capacitor (SC) are proposed for distribution volt/var compensation. In the existing volt/var control of the distribution substation, the feeder voltage and reactive power demand of the distribution are mainly controlled by the LTC transformer tap position and on/off operation of the Sc. It is very difficult to maintain volt/var at the distribution networks within the satisfactory levels due to the discrete operation characteristics of the LTC and SC. In addition, there is the limitation of the LTC and SC operation times, which affects their functional lifetimes. The proposed volt/var control algorithm determines an optimal tap position of the LTC and on/off status of the SC at a distribution substation with multiple connected feeders. The mathematical equations of the proposed method are introduced. A simple case study is performed to verify the effectiveness of the proposed method.
SC 합성기둥은 H형강 플랜지 사이에 후프를 용접하고, 플랜지 사이의 공간에 콘크리트가 채워진 새로운 합성기둥 시스템이다. 본 연구의 전단계로서 SC 합성기둥의 압축, 휨, 전단 실험을 통하여 SC 합성 기둥의 우수한 구조적인 거동을 확인하였다. 그러나 기둥은 특성상 축력과 휨을 동시에 받고 있기 때문에 SC 합성기둥에 축력과 휨이 작용할 경우에 대한 평가가 이루어져야 한다. 따라서 본 연구에서는 축력을 받고 있는 SC 합성기둥의 휨 내력을 내부 콘크리트의 충전 유무, 후프와 스터드 볼트의 사용 유무, 축력의 크기를 변수로 하여 실험을 수행하였다. 그 결과 SC 합성 기둥은순철골 기둥에 비하여 최대 내력은 약 33%~42% 정도. 연성 능력은 약 33%~63% 정도의 증가 효과를 보이고 있음을 알 수 있었다. 또한 국내 $\ulcorner$강구조 한계상태 설계기준$\lrcorner$으로 평가된 SC 합성기둥의 휨 내력은 Eurocode-4, 일본 기준식에 비해 상당히 안전측으로 제시되고 있고, 축력이커질수록 실험에 의한 최대 내력이 국내 기준식과 차이가 커져 추후 SC 합성기둥 내력산정은 Eurocode-4 식을 반영하는 것이 바람직할 것으로 판단된다.
Effects of Sc addition on microstructure, electrical conductivity, thermal conductivity and mechanical properties of the as-cast and as-extruded Al-2Zn-1Cu-0.3Mg-xSc (x = 0, 0.25, 0.5 wt%) alloys are investigated. The average grain size of the as-cast Al-2Zn-1Cu-0.3Mg alloy is 2,334 ㎛; however, this value drops to 914 and 529 ㎛ with addition of Sc element at 0.25 wt% and 0.5 wt%, respectively. This grain refinement is due to primary Al3Sc phase forming during solidification. The as-extruded Al-2Zn-1Cu-0.3Mg alloy has a recrystallization structure consisting of almost equiaxed grains. However, the as-extruded Sc-containing alloys consist of grains that are extremely elongated in the extrusion direction. In addition, it is found that the proportion of low-angle grain boundaries below 15 degree is dominant. This is because the addition of Sc results in the formation of coherent and nano-scale Al3Sc phases during hot extrusion, inhibiting the process of recrystallization and improving the strength by pinning of dislocations and the formation of subgrain boundaries. The maximum values of the yield and tensile strength are 126 MPa and 215 MPa for the as-extruded Al-2Zn-1Cu-0.3Mg-0.25Sc alloy, respectively. The increase in strength is probably due to the existence of nano-scale Al3Sc precipitates and dense Al2Cu phases. Thermal conductivity of the as-cast Al-2Zn-1Cu-0.3Mg-xSc alloy is reduced to 204, 187 and 183 W/MK by additions of elemental Sc of 0, 0.25 and 0.5 wt%, respectively. On the other hand, the thermal conductivity of the as-extruded Al-2Zn-1Cu-0.3Mg-xSc alloy is about 200 W/Mk regardless of the content of Sc. This is because of the formation of coherent Al3Sc phase, which decreases Sc content and causes extremely high electrical resistivity.
3GPP LTE 시스템에서는 상향링크로 PAPR 효율이 좋은 SC-FDMA를 채택, 표준을 진행해왔다. 하지만, SC-FDMA는 주파수 영역에서 심한 왜곡이 생길 경우 OFDMA보다 성능이 저하된다는 단점이 있다. LTE에서 LTE-Advanced로 개량되면서 이를 보완하기 위해 셀 중심지역에서는 OFDMA를 사용하고, 셀 경계지역에서는 PAPR 효율이 좋은 SC-FDMA를 사용하자는 제안이 나왔다. 본 논문에서는 상향링크에서 Hybrid OFDMA/SC-FDMA를 기반으로 릴레이를 이용했을 경우의 성능을 측정하고 릴레이와 이동국의 위치에 따라 성능을 최대로 할 수 있는 전송방식을 제안한다. 주어진 시뮬레이션 환경에서 이동국과 릴레이 위치에 따라 선택되는 전송방식의 BLER 성능 및 송신전력을 비교하였고, 릴레이의 위치에 따라 적절한 전송 방식을 선택했을 때 성능이 최대가 되는 것을 확인하였다.
The scFv antibody towards the Burkholderia pseudomallei exotoxin was previously constructed by phage display and exhibited good specificity towards the exotoxin. We report here the optimization of the scFv expression in an E. coli expression system. Four different E. coli strains (ER2537, TG1, HB2151, and XL1-Blue) were examined for optimal expression of the scFv protein. Two types of carbon source (i.e. 0.2% glucose and 0.2% glycerol) were also tested for their ability to induce the scFv expression. Cells that carried the scFv construct were grown at $30^{\circ}C$ and induced with 0.05 mM IPTG. The expression was then monitored by SDS-PAGE, Western blotting, and indirect ELISA. The Western blot profile showed different levels of the scFv expression among the host strains; XL1-Blue exhibited the highest level of the scFv protein expression. Glycerol at a concentration of 0.2% (v/v) significantly increased the scFv protein expression level when compared to 0.2% (w/v) glucose. Further optimization demonstrated that the scFv protein expression in XL1-Blue was the most optimal with a glycerol concentration as low as 0.05%. However, by indirect ELISA, only the scFv protein that was expressed in 0.2% (v/v) glycerol exhibited high specificity towards the Burkholderia pseudomallei exotoxin.
Babaei, Arash;Zarkesh-Esfahani, Sayyed Hamid;Gharagozloo, Marjan
Journal of Microbiology and Biotechnology
/
제21권5호
/
pp.529-535
/
2011
Single-chain variable fragment (scFv) is a fusion protein of the variable regions of the heavy (VH) and light (VL) chains of immunoglobulin, connected with a short linker peptide of 10 to about 20 amino acids. In this study, the scFv of a monoclonal antibody against the third domain of human CD4 was cloned from OKT4 hybridoma cells using the phage display technique and produced in E. coli. The expression, production, and purification of anti-CD4 scFv were tested using SDS-PAGE and Western blot, and the specificity of anti-CD4 scFv was examined using ELISA. A 31 kDa recombinant anti-CD4 scFv was expressed and produced in bacteria, which was confirmed by SDS-PAGE and Western blot assays. Sequence analysis proved the ScFv structure of the construct. It was able to bind to CD4 in quality ELISA assay. The canonical structure of anti-CD4 scFv antibody was obtained using the SWISS_MODEL bioinformatics tool for comparing with the scFv general structure. To the best of our knowledge, this is the first report for generating scFv against human CD4 antigen. Engineered anti-CD4 scFv could be used in immunological studies, including fluorochrome conjugation, bispecific antibody production, bifunctional protein synthesis, and other genetic engineering manipulations. Since the binding site of our product is domain 3 (D3) of the CD4 molecule and different from the CD4 immunological main domain, including D1 and D2, further studies are needed to evaluate the anti-CD4 scFv potential for diagnostic and therapeutic applications.
전력계통에서 역률개선을 위해 사용하는 전력용 콘덴서(이하 SC bank)는 전력계통의 운전상 전압 제어와 역율개선이라는 두가지 측면에서 매우 중요한 전력설비이다. 또한 최근에 전력산업 구조조정에 의해 발전분야가 분할되는 시점에서 SC bank의 역할의 중요성이 강조되고 있다. 본 논문에서는 SC의 고장원인이 무엇인지를 현장조사를 통해 수행하였다. 그 결과 SC bank를 구성하고 있는 리액터, 콘덴서, PT, 혹은 CT 흑은 방전코일의 열화원인이 대부분 차단기의 투입서지와 차단서지에 의해 발생되고 있음을 확인하였다 또한 기존의 보호시스템은 SC Bank의 보호에 적합하지 않음을 검토하였다 차단기 서지에 대한 대책으로는 투입시 전압영점투입과 중성점 저항기의 취부로 투입서지 및 차단서지를 효과적으로 감소되는 현상을 모의와 현장실측을 통해 확인하였다. 또한 기존의 보호방식이 과전류와 과전압 부족전압 혹은 CT와 PT를 이용한 차동방식에 의해 셀의 경련변화를 감지하고 있으나 이 경우 보호맹점이 존재하게 됨을 검토하였다. 이러한 보호상의 문제점을 보완하는 방법으로 SC bank는 임피던스가 늘 일정하는 점에 착안하여 전압과 전류를 이용하여 임피던스의 변화량을 감시하고, 또 한가지 방법은 SC bank의 운전특성상 무효전력만을 발생시킨다는 점에 착안하여 만일 유효전력 성분이 SC bank에서 감지된다면 소자의 이상이나 비정상적은 전류경로가 된다는 결론에 도달하고 유효전력감시를 통한 SC bank의 열화감지가 가능하다는 결론에 도달하였다. 본 논문에서 제안한 3가지의 방법, 즉, 첫째 영점투입차단기 채택, 둘째, 중성점 저항기의 도입, 셋째 새로운 보호방식에 의한 기존의 보호맹점의 보완을 제안하였다. 위의 새로운 제안을 현장에 적용하는 경우 제작사의 제작불량을 제외한 운전상의 SC bank의 문제점 및 고장빈도는 현저히 감소하게 될 것으로 사료된다.
International Electrotechnical Commission (IEC)은 국제 규격을 제 개정하는 단체로서, 1906년에 설립된 조직이다. 2006년 말 기준으로 67개국의 회원 국가를 보유하고 있으며 총 5,613개의 규격을 제 개정하고 있다. IEC는 많은 수의 규격을 제 개정하기 위하여 100개의 Technical Committee (TC)와, 각 TC 산하에 Subcommittees(SC)를 두고 있다. SC는 다시 산하에 Working group(WG)을 두어 실제적으로 해당 국제규격의 제 개정은 바로 이 WG에서 작업을 하게 된다. 본 논문에서는 IEC TC17내의 SC17B와 SC17D의 구성, 현황 및 활동과 현재 진행되고 있는 저압차단기의 규격동향에 대하여 고찰하였다. IEC TC17은 차단기, 개폐기(스위치), 단로기, 버스관로 및 배전반등과 관련된 IEC 규격의 제 개정을 담당하고 있다. TC17 산하의 SC17B는 저압 차단기, SC17D는 저압배전반제품과 관련된 규격을 관리하고 있다. 한국은 SC17B와 SC 17D의 P-member(Participant)로서 투표권을 갖고 있으며, 한국전기연구원이 운영간사를 맡고 있다. 현재 국내기업체 전문가와 연구원들의 의견을 수렴하여 국가의견으로서 IEC에 제출하고 있지만 앞으로 더 많은 전문가들의 참여가 시급한 실정이다.
심장이상증상의 상태에서 분비되는 심장혈관호르몬인 BNP의 혈중 농도측정은 심장기능부전환자의 진단에 유용하게 이용 되고 있다. 혈청 또는 혈장에서의 BNP 농도측정은 샌드위치형태의 면역학적 검정법을 이용할 수 있으며, 이때에 항 BNP 항체를 BNP 탐지 인자로 사용할 수 있다. 특히, 탐지 인자로의 사용을 위해서는 항원항체 반응부분을 링커로 연결하여 전체 항체에 비해서 경제적이며 효율 면에서도 뛰어난 scFv의 사용이 용이하다고 판단하였고, 이에 scFv의 취약점인 대장균에서의 불용성 형태의 발현을 최소화 시키고 기능적 발현을 극대화하여 심장질환 진단용 센서의 센서 칩 항체로 사용할 수 있도록 항 BNP scFv 항체의 발현을 대장균 세포질 내에서 유도 하였다. 대장균 세포질내에서의 scFv 제작을 위하여 항 BNP scFv 항체 유전자를 pColdⅣ 벡터와 pET22b (+)벡터에 각각 클로닝한 후 발현 하였으며, 그 결과 대량 생산의 장점이 있는 강력한 T7 promoter를 지닌 pET22b (+) 벡터를 이용하여 낮은 온도에서 단백질의 발현을 느리게 유도할 때 적절한 단백질 접힘 현상이 일어나 기능적인 scFv의 발현이 극대화됨을 확인하였다. 또한 IPTG의 투여에 있어서 그 농도가 높아지면 빠른 단백질 유전자의 전사를 도와 발현율이 증가하지만 과도한 농도의 IPTG 투여는 세포내의 독성을 일으켜 단백질의 생산을 저해할 수 있다는 결론에 도달하였으며, 연구를 통하여 개발한 항 BNP scFv 항체가 오직 BNP 항원과의 결합특이성을 가진다는 사실도 확인 가능 하였다.
현재까지 알려진 마이크로 레이저 호스트용 물질 중에서 가장 우수한 물리적 특성을 갖고 잇는 LaSc3(BO3)4를 융액 인상법 조건하에서 단결정으로 육성시킬 수 있는 최적 성장조건을 규명하고자 하였다. 우선 LaSc3(B(3)4의 융융특성을 규명하기 위해 DTA에 의해 La(BO3)-Sc(BO3)계의 상평형도를 작성한 결과, 이 2성분계에서 LaSc3(BO3)4는 유일한 중간상(Intermediate phase)이었으며, 용융 전에 1495 ±2℃에서 Sc(BO3)와 융액으로 분리되는 비조화 분해반응(peritectic reaction)을 나타내었다 : LaSc3(BO3)4=Sc(BO3)+melt 히타 및 도가니의 상호관계와 단열 혹은 보온상태를 적절히 조절함으로써, 성장로의 열구조를 단결정 성장에 적합하게 하기 위해 열전대를 애프터히타 최상부로부터 융체 내부까지 상승 또는 하강시키면서 4개의 열 구조에 대해 온도분포와 온도구배를 측정 및 산출하였으며, 장단점을 비교하여 최적 성장조건을 확립하였다. LaSc3(BO3)4는 부조화 용융특성이 있으므로 화학양론적 조성에 La(BO3)를 다소 추가하여 특성 성분의 융액을 만들고, 인상속도를 0.7mm/hr이하, 회전속도는 7-10rpm의 환원조건 하에서 단결정을 성장시킬 수 있었다. 또한 결정성장때, Ir 및 백금 도가니를 사용할 수 있으나, 도가니의 수명은 가열/용융/냉각 주기가 최대 8-10회이다. 실험 결과 배플판 직경 등의 애프터 히타의 구조를 변화시킴으로써, 도가니 상부의 온도를 50-100℃ 증가시키는 것이 가능하였으며, 수직 및 수평적 온도구배는 배플판의 직경에 정비례하여 증감하였고, 특히 수평적 온도구배는 열구조에 의한 의존성이 크다는 것이 확인되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.