• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.109-114
• /
• 2009

The dominant heating system used in Korean residential apartment buildings is a hydronic radiant floor heating system, known as the Ondol system. The most common control strategy applied to this traditional hydronic radiant system is a simple on-off control that intermittently supplies "hot water of a fixed temperature" at a "constant flow rate" to each room. However, the current problems with the aforementioned control are as follows: (1) since the simple on-off control is usually based on a one point measured temperature (a signal from a thermostat installed in a living room) in each dwelling unit, heating energy use for unoccupied rooms as well as a difference in temperatures between spaces (master bedroom, living room, bedroom1, bedroom2) can occur occasionally. (2) the most widely used residential water splitter has static valves, and is thus not able to change the flow rate to each room depending on the space heating load. In other words, the ratio of flow rates to rooms is fixed after construction, resulting in over- or under-heating and an improper use of energy. The aim of this paper is therefore to investigate the differences in the system's performance between control strategies in terms of the flow rate control and sensor location. It is shown that energy savings of control strategies are strongly influenced by occupant schedule.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.13-21
• /
• 2015

In recent years energy consumption has become a main concern for network development, due to the exponential increase of network traffic. Potential energy savings can be obtained from a load-adaptive scheme, in which a day can be divided into multiple time periods according to the variation of daily traffic patterns. The energy consumption of the network can be reduced by selectively turning off network components during the time periods with light traffic. However, the time segmentation of daily traffic patterns affects the energy savings when designing multiperiod logical topology in optical wavelength routed networks. In addition, turning network components on or off may increase the overhead of logical topology reconfiguration (LTR). In this paper, we propose two mixed integer linear programming (MILP) models to design the optimal logical topology for multiple periods in IP-over-WDM networks. First, we formulate the time-segmentation problem as an MILP model to optimally determine the boundaries for each period, with the objective to minimize total network energy consumption. Second, another MILP formulation is proposed to minimize both the overall power consumption (PC) and the reconfiguration overhead (RO). The proposed models are evaluated and compared to conventional schemes, in view of PC and RO, through case studies.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.1
• /
• pp.199-219
• /
• 2013

The purpose of the study was to investigate the effects of money transfer between generations on preparation behaviors for retirement, separated into assets and saving for retirement. The survey was conducted by targeting 422 married people across the nation. The factor of money transfer between generations was defined as the inheritance and gift variable. The data were analyzed using SPSS 20. Correlation, analysis of variance (ANOVA), and multiple regressions were utilized. The results indicated that preparation behaviors for retirement are affected by the economic independence of parents, inheritance, expenses for children's education, and marriage. Retirement assets were significantly affected by inheritance, the economic independence of parents, educational expenses for children, financial assets, and amount of debt, while the significant factors related to retirement savings were interests on retirement, income, wedding expenses for children, economic independence of parents, and educational expenses for children. It was concluded that the financial preparation for retirement ought to be expanded from one household's finances to finances between generations.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.56-64
• /
• 2019

Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

• Proceedings of the Korea Database Society Conference
• /
• 2010.06a
• /
• pp.33-41
• /
• 2010

Recently the number of IT equipment have increased. It consumes large amounts of energy and is emissions of greenhouse gases. Co2 emissions with the PC and the monitor has the highest percentage to 39% more than other IT equipment. In addition, Plan for your PC's power management and technology development is being pursued in developed countries. To reduce energy costs of organizations with large numbers of the PC and to cut down on Co2 emissions, the energy load control technology of ACPI standards-based PC IS suggested. AMI-based PC power-management system was constructed, Approximately 20% of operating a result of the test power consumption was reduced. Looking at the case of the United States, PC monitors from the University of Wisconsin-Oshkosh was Sleep mode. As a result, the monitor on a, $ 20 for a year reduced energy costs. In GE(General Electronic), Approximately 75,000 PC's power setting time was Monitor Off :15 minutes/ Hard Drives Off 30 minutes/ System Standby 30 minutes/ Hibernation mode 2 hours. 1 year, electric bill was $ 2.5 million savings and 3 years electric bill was $ 6.5 million savings. Measuring energy usage data, using the measured data, electric energy management technology is not. Platform development to measure energy usage for Individual energy-consuming equipment is urgently required.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.326-335
• /
• 2017

In the uplink transmission of massive (or large-scale) multi-input multi-output (MIMO) systems, large dimensional signal detection and its hardware design are challenging issues owing to the high computational complexity. In this paper, we propose low-complexity hardware architectures of Richardson iterative method-based massive MIMO detectors. We present two types of massive MIMO detectors, directly mapped (type1) and reformulated (type2) Richardson iterative methods. In the proposed Richardson method (type2), the matrix-by-matrix multiplications are reformulated to matrix-vector multiplications, thus reducing the computational complexity from $O(U^2)$ to O(U). Both massive MIMO detectors are implemented using a 65 nm CMOS process and compared in terms of detection performance under different channel conditions (high-mobility and flat fading channels). The hardware implementation results confirm that the proposed type1 Richardson method-based detector demonstrates up to 50% power savings over the proposed type2 detector under a flat fading channel. The type2 detector indicates a 37% power savings compared to the type1 under a high-mobility channel.

• Health Policy and Management
• /
• v.18 no.1
• /
• pp.21-42
• /
• 2008

This study investigates economies of scale, cost complementarity and economies of scope for healthcare organizations using econometric approaches. The economies of scale appear to exist in each service provided by a hospital such as inpatient treatment services, outpatient treatment services, and other patient treatment services, respectively. When we test all services in aggregate level, it also indicates that the healthcare industry on average exhibits the economies of scale of 6 percent, which implies that scaling up hospital sizes will bring substantial cost savings to them Evidence shows that cost complementarity exists between outpatient services and other services for patients and, i.e., these other services for patients experience the reduction in marginal costs as the outputs of the outpatient services increase. For the economies of scope, they are present in most service areas; aggregate level services, outpatient services, and other services for patients, respectively. Inpatient treatment services, however, do not show any evidence of the economies of scope. Results show that the economies of scope are achieved by the general hospital type that provides all service areas such as inpatient treatments, outpatient treatments, and other services for patients. The existence of the economies of scope provides the rationale for extending the existing line of business in a hospital into more diverse areas of services where its benefit comes in the form of cost savings. In sum, it overall provides evidence that the M&As in this industry are encouraged to achieve cost reductions from the economies of scale and scope by changing the size and the output mix.

• Journal of the Korean Home Economics Association
• /
• v.47 no.1
• /
• pp.25-43
• /
• 2009

The purpose of this study was to find how economic structures differ among four different household groups('enough', 'so so', 'a little difficult', 'very difficult') classified by subjective evaluation on their economic conditions. The data were drawn from 2004 Korean Labor and Income Panel Study conducted by Korea Labor Institute, and $X^2$-test and F-test were utilized by SPSS for Windows 10.0. The major findings were as following. First, the economic levels of household groups of 'enough' and 'so so' showed to be higher than the average. This result implies that households tend to evaluate by themselves their economic conditions comparing to the others. Second, the deviations of average economic levels among four different household groups were relatively bigger in household economic elements of liquid asset, monthly savings and insurance than the others, and relatively smaller in household economic elements of total expenditure, especially expenditures in food at home, education, medical, communication than the others. Third, the households of 'a little difficult' and 'very difficult' showed undesirable economic structures resulting from lack of savings and insurance for their future.

• Architectural research
• /
• v.1 no.1
• /
• pp.31-40
• /
• 1999

In this age of "Information", many people consider it a deterrent to information flow to provide a hierarchy with private rooms in a modern office layout. There are others, however, who insist that visual and acoustical privacy are more important than any other design factor in achieving higher productivity. The debate may never end, but the partitioned open plan, which is a new form of the vast open plan, has merits of each concept - open and closed layout. Consequently, office design has dramatically shifted to partitioned open planning, with shorter, temporary walls or partitions, originally intended for increasing privacy and diminishing hierarchy, yet still keeping flexibility in spatial organization. The introduction of low-level partitioned spaces in an office layout, however, produces a complicated lighting design problem. Obviously, accurately predicted daylighting performance data are needed not only for daylighting design but for artificial lighting system design. Scale models of 12 sets of unit partitioned spaces are constructed and extensive scale model measurements of both daylight and reflected sunlight have been performed within an artificial sky simulator. The prototype-building interior is modeled with different partition configurations, each of which is modeled using the different envelope geometry and exterior configurations, and then the variations in interior light levels are estimated. The result indicates that partitioned spaces employed in an open plan of modern offices still offer a large potential for daylighting and energy saving as well. Much of the savings may derive from the cumulative effect of reflected sunlight. Optimal design for building envelope geometry and exterior configuration promises additional savings.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.21-28
• /
• 2006

Field or laboratory wheel tracking tests have been employed for the evaluation of the rutting potential of asphalt paving mixtures. Compared to field tests, laboratory wheel tracking tests are much less expensive and more manageable for most road projects. However, most test laboratories are not equipped to perform such tests because there does not exist any standard test procedure, and the required equipment is rather expensive. Futhermore, the size of test specimens and the relatively large quantity of test mixture required present difficulties for laboratory specimen mixing and compaction. This paper describes a project conducted to study the feasibility of replacing wheel tracking testsby a repeated-load creep test for rutting potential evaluation. Comparisons were made between the results of the two tests for different test temperatures, loading speeds and applied pressures. Three types of asphalt mixtures were studied in the test program. Favorable conclusions concerning the use of the repeated-load test for rutting potential evaluation were drawn based on the findings of the experimental test results. The correlation between the two types of tests was found to be good for all threeasphalt mixtures. Adopting the repeated-load creep test would lead to cost savings since it employs standard test equipment already available in most laboratories. It would also result in substantial time savings due to the much smaller quantity of mix needed, and the ease in specimen preparation.