• 대한핵의학회지
• /
• 제20권1호
• /
• pp.75-83
• /
• 1986

Various TSH RIA kit components were prepared. Conditions for $^{125}I$ labelling of h-TSH were optimized by diminishing the amount of chloramine-T, ertending reaction time and lowering reaction temperature. Yield, specific activity, and immunological activity could be maintained moderately under such mild reaction conditions. The mixture of polyethyleneglycol(PEG) and second antibody worked effectively as a B/F separation agent. Even though the mixture was made with more diluted PEG and second antibody than those of using the sole component separately, the tine required for the B/F separation was shorter in case of using the mixture. The sequential saturation technique was efficient than those of applying ordinary equilibrium saturation technique in assay sensitivity and assay precision points of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.108-112
• /
• 2001

Vector control schemes are used in inverter-fed induction motor drives to obtain high performance. Crucial to the success of the vector control scheme is the knowledge of the instantaneous position of the rotor flux. However, the position of the rotor flux change with temperature and magnetic saturation of the motor. This variation cause deterioration of both steady state and dynamic operation of the motor drives. Performance degradation is in the form of input-output torque nonlinearity and saturation of the motor. Analytic expressions are derived to evaluate the effects due to parameter sensitivity.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.57-62
• /
• 2005

The frost heaving pressure can be a problem for weakening of the railway roadbed material. This study was initiated to investigate the soils frost heaving pressure and physical characteristics(Liquid limit, permeability, SEM analysis) resulting from freezing and freezing-thawing cycle process. Therefore, upon freezing a saturated soil in a closed-system from the top, a considerable pressure was developed. Weathered granite soils, sandy soil were used in the laboratory freezing test which sometimes subjected to thermal gradients under closed-systems. The frost heaving pressure arising within the soil samples and the temperature of the samples inside were monitored with elapsed time. The degree of saturation versus heaving pressure curve is also presented for weathered granite soil and the maximum pressure is closely related to this curve. Based on the laboratory test results, fine-grained soils with strong attractive forces between soil grains md water molecules, and additional water is attracted into the pores leading to further volume changes and ice segregation.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.13-19
• /
• 1992

Supercritical fluid technology was applied to the regeneration of industrial catalyst contaminated with toxic materials. The regeneration process of activated loaded with phenol was proposed, then the adsorphon tower was packed with the activated carbon-bed. Phenol diffuses into supercritical carbon dioxide(SCC) through the micro-pore and voldge of the activated carbon. The saturated solubility of phenol in SCC depended on the density of SCC varing with temperature and pressure conditions. Therefore, the fasile phase equilibrium calculation model of dxpanded liquid One was proposed, and equilibrium solubility of phenol in SCC was calculated using the model theoretically. The regeneration mechanism of activated carbon was analysed by degree of saturation of phenol and diffusion in SCC. The solubility prediction was more satisfactory for the wide range of SCC density than the dense gas model and the desorption of phenol depended on the degree of saturation of phenol in SCC.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.824-831
• /
• 2000

Alumina tapes, having various ratios of alumina to alumina＋binder＋plasticizer (a/(a＋o)) and binder to binder＋plasticizer(b/(b＋p)), were prepared by the tape casting method. The tapes were thermocompressed varying the thermocompression parameters such as temperature, pressure, and duration time. Among the parameters, the pressure was the most influential to the tape packing density. The packing density varied in two different ways depending on the a/(a＋o) ratio. For the tapes having low a/(a＋o) ratio, a saturation density was reached by applying very a low pressure of 1 MPa. For tapes with high a/(a＋o), on the contrary, the saturation density was obtained at a relatively high pressure. These different responses to the pressure are attributed to the fact that the rearrangement of alumina particles by the pressure becomes easy as an organic content in the tapes is high.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.51-57
• /
• 2004

Vector control schemes are used in inverter-fed induction motor drives to obtain high performance. Crucial to the success of the vector control scheme is the knowledge of the instantaneous position of the rotor flux. However, the position of the rotor flux change with temperature and magnetic saturation of the motor. This variation cause deterioration of both steady state and dynamic operation of the motor drives. Performance degradation is in the form of input-output torque nonlinearity and saturation of the motor. Analytic expressions are derived to evaluate the effects due to parameter sensitivity. Also, dynamic response is shown by speed command with the variation of stator and rotor resistance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.360-367
• /
• 1999

An inverter-driven induction motor is used as the traction motor for a high speed drive system that required safety, reliabillity, performance, compact size owing to the space and weight alloted for attaching to train, etc. particularly it is possible to happen the saturation effects of flux density at constant voltage-frequency region and then increase very higher than the at lowed capacity of no-load current and temperature in any case. therefore the optimum design of core, optimum voltage-frequency ratio, adoption of high grade magnetic core have been developed and researched for preventing these problems. this paper show the saturation effects of traction rotor by measuring the induced voltage of search coil at stator teeth and presents optimum voltage-frequency ratio as well as optimum core design through the comparison with efficiency, power factor, load current and no-load current for korea high speed train.

• 한국자원식물학회지
• /
• 제26권5호
• /
• pp.636-644
• /
• 2013

원료곡인 동부의 침종, 포화, 노화 조건이 동부나물 생산량과 생장반응에 미치는 영향을 검토한 결과, 흡수량은 침종 초기 2시간까지는 급속히 증가하다 이후에는 완만히 증가하였으나, 발아력과 나물 생산수율 및 잔뿌리 발생량은 침종기간(1~6시간)이 길어질수록 낮았다. 5일간 포화(수분 $96{\pm}1%$, $20^{\circ}C$)처리가 무처리나 1, 3일간 포화처리에 비해 발아력과 나물 생산수율 및 잔뿌리 발생량이 높았다. 고온 노화처리에 따른 발아력과 나물 생산수율은 무처리에 비해 낮았는데, 이상의 결과로 동부나물 재배를 위한 원료곡 전처리 방법은 5일간 포화(수분 $96{\pm}1%$, $20^{\circ}C$)처리하고 세척하여 재배하는 것이 좋은 것으로 판단된다.

• 한국재료학회지
• /
• 제7권1호
• /
• pp.69-75
• /
• 1997

$SiO_{2}/CoNiCr/Cr$ 합금 박막을 RF magnetron sputtering 법으로 Cr의 두께를 변화시키면서 제조하였다. 제조된 박막을 진공 열처리하여 열처리 온도에 따른 포화자화, 보자력, 각형비를 조사하였다. $SiO_{2}/CoNiCr/Cr$ 합금 박막에서 포화자화 값은 Cr 하지층의 두께가 증가함에 따라 감소하고 보자력은Cr 하지층의 두께가 증가함에 따라 증가하였다. 이러한 박막의 포화자화 값은 600 emu/cc, 최대 보자력은 550 Oe를 나타내었다. $SiO_{2}/CoNiCr/Cr(1700{\AA})$ 합금 박막에서는 열처리 온도가 증가함에 따라 포화자화 값은 급격히 감소하고 보자력은 증가하였다. 열처리 온도가 $650^{\circ}C$에서 포화자화 값은 as-deposited상태보다도 1/10로 감소하였고 보자력은 1600 Oe로 최대값ㅇ르 나타내었다. Cr 하지층의 두께와 열처리 온도의 증가에 따른 포화자화의 감소는 하지층에서 자성층으로 Cr이 확산하므로써 자기 모멘트의 감소에 의한 것으로 판단된다. 또한 보자력의 증가는 박막 면에 수직한 방향으로 급격한 결정 성장에 기인한 것이다.

• 공업화학
• /
• 제1권1호
• /
• pp.83-90
• /
• 1990

PbTe, SnTe, PbSnTe계 반도체는 저온 열전재료로서 이들의 화학조성과 비화학양(nonstoichiometry)은 열전 특성에 중요한 인자가 된다. 본 연구에서는 $(Pb_1\;_xSn_x)_1$ $_yTe_y$의 x=0.1, 0.2, 0.3, 0.4, 0.5인 고용체 시편을 제조하여 이들의 조성을 분석하고 화학조성과 전기전도도 및 열기전력과의 상관 관계를 조사하였다. 조성분석을 위하여 Pb의 함량은 EDTA와 Pb(II) 표준용액을 이용한 착화합물 역적정법을, Te의 함량은 $KMnO_4$와 Fe(II)표준용액을 이용한 산화환원 역적정법을 사용하였다. 또한 300K-750K의 온도범위에서 직류 4접점법에 의해 전기전도도를, Heat Pulse법에 의해 열기전력을 측정하였다. 모든 시편은 금속성분 (Pb+Sn) 보다는 Te의 양이 많은 비화학양의 조성을 보이며 p - 형의 반도성을 가졌고 주석의 함량이 증가할수록 비화학양도 증가하였다. 열기전력의 측정으로 시편의 주 전하나르개는 정공임을 확인할 수 있었고 비화학양에 따른 열기전력의 변화를 saturation 영역 내에서 온도에 따른 Fermi Level의 변화폭과 관련지어 설명하였다. x=0.1인 시편은 약 670K 에서 p - 형으로부터 n - 형으로 전도특성이 전환되었는데 이는 이온도에서 saturation영역에서 intrinsic영역으로 전이되며 전자의 이동도가 정공의 이동도보다 크다는 사실로부터 설명되었다.