• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.247-251
• /
• 2007

Because of the ozone layer depletion and global warming, new alternative refrigerants are being developed. In this study, evaporation heat transfer characteristics of carbon dioxide flowing upward in a vertical micro-fin tube have been investigated by experiment. Before a test section, a pre-heater is installed to adjust the inlet quality of the refrigerant to a desired value. The micro-fin tube with outer diameter of 5 mm and length of 1.44 m was selected as the test section. The test was conducted at mass fluxes of 318 to $530\;kg/m^2s$, saturation temperature of -5 to $5^{\circ}C$, and heat fluxes of 15 to $30\;kW/m^2$. As the vapor quality increases, the heat transfer coefficients of carbon dioxide are increased, and the heat transfer coefficients increase when the heat fluxes and saturation temperatures increase, and there was not much of influence of mass flux on the heat transfer coefficients.

• 설비공학논문집
• /
• 제14권1호
• /
• pp.38-45
• /
• 2002

Evaporative heat transfer characteristics of carbon dioxide have been investi- gated by experiment. The experiments have been carried out for a seamless stainless steel tube of the outer diameter of 9.55 mm, the inner diameter of 7.75 mm and the length of 5.0 m. Direct heating method was used for supplying heat to the refrigerant where the test tube was uniformly heated by electric current which was applied to the tube wall. Experiments were conducted with$CO_2$of purity 99.99% at saturation temperatures of 0.0 to 10.5$^{\circ}C$, heat fluxes of 12 to 27kW/$m^2$s and mass fluxes of 212 to 530 kg/$m^2$s. The heat transfer coefficients of $CO_2$are decreased as the vapor quality increases and these phenomena are explained by dimensionless Weber and Bond numbers. The heat transfer coefficients of$CO_2$increase when the heat and mass fluxes increase, and the saturation temperature effects are minor in the test range of this study. The present experimental data are compared with six renowned correlations with root-mean-squared deviations ranging from 23.0 to 94.9% respectively.

• 대한교통학회지
• /
• 제26권4호
• /
• pp.161-172
• /
• 2008

국토해양부는 신호교차로 서비스수준 분석에 도로용량편람이 제시하는 방법의 적용을 장려하고 있으며 실시간신호제어교차로는 지능형교통체계 구축사업으로 그 숫자가 현장에서 꾸준히 증가하고 있다. 도로용량편람은 정주기식 신호교차로 서비스수준 분석방법에 국한하여 제시하고 있어 현장 실무자들은 실시간신호제어교차로 서비스수준 분석에 어려움을 경험하고 있다. 본 연구는 도로용량편람 수준에서 실시간신호제어교차로 서비스수준 분석의 기초가 되는 방법론을 제안하며 향후 추가로 수행되어야 하는 개발방향을 검토한다. 한 개의 신호교차로를 표본으로 세부 요소모형들을 간이 개발하여 검증한 결과 제안된 방법은 실제 현장 자료와 유사한 수준의 서비스 수준을 추정할 수 있음을 확인하였다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.114-121
• /
• 2013

미세채널을 갖는 증발형 열교환기의 효율을 평가하기 위하여, 공기의 온도와 물의 온도와 같은 열교환기의 상태값들을 계산하기위한 관계식들이 문제를 단순화하기 위한 몇 가지 가정을 적용한 Navier-Stokes 방정식으로부터 유도되었다. 미세채널내부는 물의 상태에 따라 3가지 영역으로 나누었다. 이 연구의 결과로써, 미세유로를 갖는 증발형 열교환기의 증발시작시점과 건조완료점을 계산하는 방정식이 제시되었다. 본 연구결과는 증발효과를 이용하는 미세채널형 열교환기의 설계, 성능예측 및 시험결과 분석 등에 효과적으로 활용될 수 있을 것으로 기대된다.

• Smart Structures and Systems
• /
• 제23권4호
• /
• pp.359-371
• /
• 2019

As part of a structural health monitoring system, the relative geometric relationship between a ship and bridge has been recognized as important for bridge authorities and ship owners to avoid ship-bridge collision. This study proposes a novel computer vision method for the real-time geometric parameter identification of moving ships based on a single shot multibox detector (SSD) by using transfer learning techniques and monocular vision. The identification framework consists of ship detection (coarse scale) and geometric parameter calculation (fine scale) modules. For the ship detection, the SSD, which is a deep learning algorithm, was employed and fine-tuned by ship image samples downloaded from the Internet to obtain the rectangle regions of interest in the coarse scale. Subsequently, for the geometric parameter calculation, an accurate ship contour is created using morphological operations within the saturation channel in hue, saturation, and value color space. Furthermore, a local coordinate system was constructed using projective geometry transformation to calculate the geometric parameters of ships, such as width, length, height, localization, and velocity. The application of the proposed method to in situ video images, obtained from cameras set on the girder of the Wuhan Yangtze River Bridge above the shipping channel, confirmed the efficiency, accuracy, and effectiveness of the proposed method.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.38-47
• /
• 1989

헴트(HEMT) 소자의 순수 해석적 DC모델이 2차원 전하제어 시뮬레이션 결과[4]에 기초하여 제작되었다. 이 모델에서는 2-DEG 채널의 전자 운송 역학에 확산 효과를 추가하였다. 이 확산효과는 기존 1차원 DC모델에서 사용하는 전자 이동도 및 문턱전압을 증가시키는 효과를 가졌음을 보였다. 또한 2-DEG 농도분포함수를 piecewise 선형화하여 HEMT 소자의 subthreshold 특성의 해석적 모델을 추가하였고, 따라서 2-DEG의 채널 두께 및 게이트 용량을 게이트 전압의 함수로 나타내었다. I-V curve의 전류포화영역에서의 기울기를 모델하는데는 gate 밑의 전자포화채널 지역에서의 전자채널두께와 채널길이 변조현상을 함께 고려하였다. Troffimenkoff형의 전장의존 전자이동도를 사용하여 I-V곡선의 포화현상을 모델하였다. 또한 기존 1차원 모델에서 감안되지 않은 2차원 효과가 실제 전류특성곡선에서 매우 중요한 역할을 하며, 이 효과가 효과적으로 1개의 보정상수f로 보상됨을 보였고, 물리적으로 이 상수가 채널 GCA 지역과 채널포화지역 사이에 형성되는 채널천이지역의 전자농도와 관계됨을 보였다.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.101-108
• /
• 2013

This paper is presented an experimental study of flow boiling heat transfer characteristics of ammonia, and is focused on pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal small tube with inner diameter of 3.0 mm and length of 2000 mm. The direct heating method is applied for supplying heat to the refrigerant, where the test tube is uniformly heated by electric current. The local heat transfer coefficients were obtained over a heat flux range of 20 to $80kW/m^2$, a mass flux range of 50 to $500kg/m^2s$, a saturation temperature range of 0 to $10^{\circ}C$, and quality up to 1.0. The pressure drops increase with increasing mass flux and heat flux, and with decreasing saturation temperature. The heat transfer coefficients increase with increasing mass flux and saturation temperature in middle and high quality region. And the local heat transfer coefficient increase with increasing heat flux in low quality region. The heat transfer coefficient of the experimental result was compared with six existing heat transfer coefficient correlation. A new boiling heat transfer coefficient correlation based on the superposition model for ammonia in small tubes is developed average deviation of -0.17% and mean deviation of 10.85%.

• 설비공학논문집
• /
• 제18권11호
• /
• pp.906-914
• /
• 2006

The present paper dealt with an experimental study of boiling heat transfer characteristics of R-290. Pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal smooth minichannel were obtained with inner tube diameter of 3.0 mm and length of 2,000 mm. The direct electric heating method was applied for supplying a heat to the refrigerant uniformly. The experiments were conducted with R-290 purity of 99.99%, at saturation temperature of 0 to $10^{\circ}C$, a mass flux range of $50{\sim}250kg/m^2s$, and a heat flux range of $5{\sim}20kW/m^2$. The heat transfer coefficients of R-290 increased with increasing mass flux and saturation temperature, wherein the effect of mass flux was higher than that of the saturation temperature. Heat flux has a low effect on the increasing of heat transfer coefficient. The heat transfer coefficient was compared with six existing heat transfer coefficient correlations. The Zhang et al.'s correlation (2004) gave the best prediction of heat transfer coefficient. A new correlation to predict the two-phase flow heat transfer coefficient was developed based on the Chen correlation. The new correlation predicted the experimental data well with a mean deviation of 11.78% and average deviation of -0.07%.

• 대한방사선기술학회지:방사선기술과학
• /
• 제9권1호
• /
• pp.73-81
• /
• 1986

This paper carried out an experiment on the characteristics of time, temperature, electric field and the dependense of electrode materials and gap length by the conduction current of the insulating oil used for x-ray tube housing. The obtained results can be summarized as following: 1. In the x-ray tube housing insulating oil with vacuum condition, conduction current is declined more than the x-ray tube housing insultaing oil with the air, and is held stable states. 2. At the low electric field the higher temperature of the x-ray tube housing insulating oil is increased, the more conduction current. 3. The dependence of electrode material is appeared at the low electric field and the short gap length than the high and the long with Fe> Cu >Al. 4. At the I-E characteristics, the low electric field than 1000 [V/cm] is appeared Ohm's law region, and the high become saturation region. 5. At the same electric field, the longer gap length become, the more conduction current is increased, and the same applied voltage, the longer, the less conduction current is decreased, the less low than high temperature x-ray tube housing insulating oil.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.31-35
• /
• 1999

본 연구에서는 반도체 소자에서 일렉트로마이그레이션에 기인하는 Al-1%Si 박막배선의 길이 변화에 따른 수명시간 의존도를 조사하였다. 사용된 Al-1%Si 박막배선은 표준 사진식각 공정(standard photolithography process)을 사용하여 제작된 직선형 패턴이다. 직선형 패턴은 100에서 1600 $mu extrm{m}$ 범위의 길이 변화를 갖도록 제작하였다. Ti underlayer가 없는 시편보다 Ti underlayer가 있는 시편에서 Al-1%Si 박막배선의 수명시간이 더 길게 나타났다. Ti underlayer를 갖는 시편에서 electromigration에 대한 저항성을 향상시키는 것으로 사료되어진다. Al-1%Si 박막배선의 길이에 의존하는 수명시간은 800$\mu\textrm{m}$ 이하에서 포화되는 경향을 나타내었다.