• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.217-226
• /
• 2013

PURPOSES : Under the capacity conditions with balanced approach flows, roundabouts give less delay than existing signalized intersections; however, flows over 450 vehicles/hour/lane with unbalanced approach flow conditions, roundabouts efficiency drops due to the short time difference between the critical gap and the follow-up headway. The purpose of this study is developing a roundabout Signal Metering operation method by considering approach lanes degree of saturation. METHODS : A four-way-approach with one-lane roundabout is selected to compare the Signal Metering performance for the case of 16 different unbalanced flow conditions. Based on these traffic conditions, the performance is evaluated for 64 different cases of Signal Metering combinations by using SIDRA software. A degree of saturation(V/C ratio) sum for two adjoined approaches is used for the performance index of choosing Metered Approach and Controlling Approach. RESULTS : When the V/C ratio sum is 0.29~0.81 and Metered Approach flow is less than Controlling Approach flow, the average delay saving per vehicle is about 7 seconds; however, after this rage the delay saving decreases gradually until the V/C ratio sum reaches around 1.0. The range of V/C ratio sum 0.93~1.09 provides average delay saving per vehicle about 3 seconds. In case of V/C ratio sum is grater than 1.0 and the flows of Metered Approach is grater than Controlling Approach, the average delay per vehicle increases 3~11 times respectively. CONCLUSIONS : As expected, the Signal Metering provides substantial improvements in delay saving for the case of V/C ratio sum is 0.3~1.0 under the traffic flow conditions of Metered Approach is less than Controlling Approach.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.93-97
• /
• 2014

Condensation particle counter (CPC) has been one of the most important basic instrument for measuring number concentration of submicron aerosols. The principle of the CPC is to expose aerosols to a supersaturated vapor and cool down which causes adiabatic expansion. The particles grow by heterogenous nucleation to a sufficient size for easy detection by optical method. However, for growth by condensation, CPC essentially needs both saturater and condensor causing a heavy system. Therefore, it is hard to install commercial CPC to tethered balloon package system. In this study, we developed customized CPC for tethered balloon package system called Hy-CPC which is lighter and smaller in structure than commercial CPCs, and evaluated activation efficiency and detection efficiency by Hy-CPC using electrostatic method (electrometer and Faraday cup).

• 한국안전학회지
• /
• 제15권4호
• /
• pp.56-61
• /
• 2000

The precise and reliable loss model for induction motor and converter system is very important in order to predict the efficiency performance of variable speed drives. This paper proposes an accurate loss model of induction motor and converter system. The motor losses, such as stator and rotor copper loss, core loss and stray loss, are considered for fundamental and harmonic frequencies. Also considered are the skin effect on rotor resistance, temperature effect on bath stator and rotor resistance, magnetizing inductance saturation, and friction and windage loss. All the above features are incorporated in a synchronous frame dynamic d-q equivalent circuit. The converter system, consisting of a diode rectifier and PWM transistor inverter, is modeled accurately for conduction and switching losses. Validity of the models, in both steady state and transient conditions, is verified by simulations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.190.2-190.2
• /
• 2014

We report the origin of the improvement of the power conversion efficiency (PCE) of hybrid thin-film solar cells when a soluble C60 derivative, [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM), is introduced as a hole-blocking layer. The PCBM layer could establish better interfacial contact by decreasing the reverse ark-saturation current density, resulting in a decrease in the probability of carrier recombination. The power conversion efficiency of this optimized device reached a maximum value of 8.34% and is the highest yet reported for hybrid thin-film solar cells.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.173-174
• /
• 2006

High power amplifier (HPA), which is used in transmitter of wireless communication systems, usually works in near saturation point in order to achieve maximum efficiency. In this region, HPA can introduce undesirable nonlinear effects. In this paper, we present a polynomial modeling method for efficient techniques to compensate for nonlinear distortion introduced by nonlinear HPA. Proposed polynomial predistorter inverses actual amplifier. Namely, we derive polynomials of amplifiers from analytical method and the electrical parameters in the data sheet of an actual amplifier and then can derive polynomial predistorter by inversing them. It is an effective and a simple method to compensate nonlinear distortion. SSPA(Solid-state power amplifier) is considered. We also analyze the effects of predistortion on the SER performance of communication system with 16-QAM modulation format. The results have shown the efficiency of this model.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.54-59
• /
• 1996

As the current shape of SRM is of pulse type and changed by the motor parameters and drive conditions, the influences on the drive efficiency by control method are more than other types of motors. In this paper, a proper excitation condition to drive a SRM with high efficiency is proposed and tested. It is derived from the conditions that the phase current of a SRM is to be flat-topped at various drive. The saturation effect of magnetic circuit is accounted for more accurate analysis. Experimental tests are executed to verify the proposed excitation method. This drive system is easy to commutate and also advantageous in reducing torque ripple. (author). 6 refs., 10 figs., 1 tab.

• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.93-97
• /
• 2012

This study was conducted to evaluate the efficiency of various inorganic and organic materials to improve physical properties of soil. Saline sodic soil (saturation percentage = 40.36%, $EC_e=5.15dS\;m^{-1}$, $pH_s=8.70$, $SAR=18.84(m\;mol\;L^{-1})^{1/2}$, bulk density =$1.49Mg\;m^{-3}$) was collected, brought to wire house and filled in pots after laboratory analysis for various parameters. Different sources of organic nutrients like farm manure (FM), press mud, compost, poultry manure and sesbania green manure were analyzed for their chemical composition. The experiment comprised of 12 treatments replicated thrice; $T_1$: control (recommended NPK), $T_2:{\frac{1}{2}}$ recommended NPK, $T_3$: FM at 1.5% by soil weight, $T_4$: pressmud at 1.5% by soil weight, $T_5$: compost at 1.5% by soil weight, $T_6$: poultry manure at 1.5% by soil weight, $T_7$: sesbania green manure at 1.5% by soil weight, $T_8:T_2$ + FM at 0.75% by soil weight, $T_9:T_2$ + pressmud at 0.75% by soil weight, $T_{10}:T_2$ + compost at 0.75% by soil weight, $T_{11}:T_2$ + poultry manure at 0.75% by soil weight, $T_{12}:T_2$ + sesbania green manure at 0.75% by soil weight. These treatments were applied using completely randomized (CR) design and appropriate time was given to decompose these organic nutritional sources. Seeds of wheat cultivar Sahar-2006 were sown. After harvesting the wheat, soil samples were collected from each pot and analyzed for various physical properties like bulk density, porosity and saturation percentage. An improvement in physical properties (bulk density, porosity and saturation percentage) of soil was noticed with the application of various organic nutritional sources but role of compost alone ($T_5$) remained prominent.

• 한국의학물리학회지:의학물리
• /
• 제18권1호
• /
• pp.35-41
• /
• 2007

본 연구의 목적은 비침습적 동맥스핀라벨링(arterial spin labeling) 자기공명영상을 이용하여 다편(multislice) 뇌 관류영상(perfusion-weighted Images)을 얻을 수 있는 최적화 방법을 연구하는 데 목적이 있다. 본 연구에서는 세 가지 인자를 최적화하는 데 초점을 두었다. 첫째, 뇌로 흘러 들어오는 혈액을 최적으로 라벨링할 수 있는 펄스를 만드는 것이다. 시뮬레이션 결과 900도의 각을 이루는 반전펄스(adiabatic hyperbolic secant Inversion pulse)는 반전을 효과적으로 할 수 있고 반전을 이루는 형태가 직각에 가깝게 할 수 있는 최적이었다. 둘째, 영상을 얻고 난 후에 계속하여 남아 있는 자화(residual magnetization)을 최소화하는 것이다. 이를 최소화하기 위해서는 포화 펄스(saturation pulses)와 자화를 손상시키는 자장(speller gradients)을 동시에 사용하는 것이 최상의 방법임을 알았다. 마지막으로, 라벨링하는 영역과 영상을 얻는 영역 사이의 거리를 최소화할 수 있는 방법을 연구하였다. 두 영역 간의 최소 거리는 약 20 mm 정도가 최적임을 발견하였다. 위에서 얻은 최적화된 인자들을 바탕으로 13명의 정상인의 뇌에서 관류 영상을 얻은 결과 매우 좋은 대조도의 영상을 얻을 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4367-4386
• /
• 2015

The concept of Internet of Things (IoT) has shed new light on WSN technologies. MAC protocol issues improving the network performance are important in WSNs because of the increase in demand for various applications to secure spectrum resources. Cognitive radio (CR) technology is regarded as a solution to the problems in this future wireless network. In recent years, energy efficiency has become an issue in CR networks. However, few relevant studies have been conducted. In this paper, an energy-efficient non-overlapping channel MAC (ENC-MAC) for CR-enabled sensor networks (CRSNs) is proposed. Applying the dedicated control channel approach, ENC-MAC allows the SUs to utilize channels in a non-overlapping manner, and thus spectrum efficiency is improved. Moreover, the cooperative spectrum sensing that allows an SU to use only two minislots in the sensing phase is addressed to en-hance energy efficiency. In addition, an analytical model for evaluating the performance, such as saturation throughput, average packet delay, and network lifetime, is developed. It is shown in our results that ENC-MAC remarkably outperforms existing MAC protocols.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.339-342
• /
• 2003

Main PDP panel efficacy improvement factors are discussed. A large panel efficacy improvement can be obtained through a combination of discharge efficiency improvement and phosphor improvement. Important design elements are a high Xe-content gas mixture, the application of a $TiO_2-layer$, and a new green phosphor with little saturation at high VUV-load. In a 4-inch color test panel with a conventional stripe-type cell configuration a white efficacy of 4.4 lm/W and a luminance of 5000 $cd/m^2$ is obtained for sustaining at 250V in addressed condition.