• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.373-380
• /
• 2009

The evaporation process of multi-component fuel is different from one of a single component, because the properties of each component affects among the components. In actual engine, the spatial distribution of fuel vapor concentration dominates auto-ignition and initial combustion, and depends on the volatility and diffusivity of each component fuel contained in the multi-component fuel. Then, this study proposes a simplified numerical scheme for analysis of evaporation process of multi-component fuel sprays. Evaporation process is calculated by KIVA-II code based on the simple two-phases region that is approximated by modified saturated liquid-vapor line, which was obtained by connecting the 50% distillation temperature for each component under several pressure fields. Consequently, it can be quantitatively simulated that vapor of low boiling fuel component mostly exists around nozzle and spray tip region, the high boiling duel component, on the other hand, mostly appears near the spray tip.

• Journal of the korean society of oceanography
• /
• v.39 no.2
• /
• pp.148-154
• /
• 2004

This study describes the realtime monitoring system for water quality conditions in coastal waters. Some issues on the data qualify control and quality analysis are examined along with examples of erroneous data. Three different cases of database produced by the realtime monitoring system are presented and analyzed, namely 1) hypoxic condition, 2) over-saturated D.O. and 3) short-term variability of temperature and D.O. In utilizing the realtime database, D.O. prediction and warning models are developed based on autoregressive stochastic process. The model is very simple, yet, users in various levels from powerful and useful with its ability to send warning messages to users in varous levels from governmental administrative staff to local fisherman, and give them some allowances to cope with the situation.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.2
• /
• pp.150-156
• /
• 1997

The effect of variation of pack activators, compositions, temperature and time on the thickness and structure of aluminide coatings formed on the TiAl alloy was studied in one-step packs and two-step packs containing aluminum for the purpose of improvement of oxidation resistance. The thickness of coating layer was increased with increasing $NH_4Cl$ content up to 3wt% and then it was saturated. Oxidation resistance of coating layers carried out at one step pack was superior to that of ones through of two step pack. The improvement of high temperature oxidation resistance was due to the formation of a protective $Al_2O_3$ surface layers and coating the alloys with $TiAl_3$ phase.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1780-1787
• /
• 1992

Experiments have been performed on the thermal behavior in a liquid saturated porous medium in a system to simulate a single well aquifer thermal energy storage system. The principal interests in this study are the combined effects of forced and natural convection. Significant buoyancy flow due to natural convection is developed quickly as the temperature difference between the injection and original aquifer temperature increases. Theoretical model under simplified assumptions (called simple buoyancy flow model in this study) has been developed. The results of this model agree well with the experiments. The effects of buoyancy flow on the recovery factor are also examined in this study.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.395-399
• /
• 1969

On the soft carbon made from petroleum coke, it was found that the graphitization began at around 2,000$^{\circ}C and crystallite diameters were almost saturated at 2,400$^{\circ}C., and that the molecular planes were difficult to arrange into an ideal graphite lattice in spite of the saturation of crystallinity by heat treatment temperature. On the hard carbon made from cross-linked thermosetting plastics, phenol-formaldehyde filler and phenol-benzaldehyde binder, it was very difficult to rotate the molecular planes into a regular directional arrangement and into a consecutive order corresponding to the large graphite crystals. In addition to the above mentioned crystallinity, it was also determined in relation to electric conductivity, resistivity, hardness and apparent density of carbons.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.27-33
• /
• 1977

The alkaline protease was isolated from the culture of Penicillium species (P-46) grown in the wheat bran media. The crude purification of this enzyme was carried out by extraction with distilled water and precipitated with 0.7-saturated ammonium sulfate, then dialysis for 3days. The activity of this enzyme was determined by Folin's colorimetric method. The results were as follows; 1. The optimum pH and temperature of this enzyme were pH 8.4 and $45^{\circ}C$. 2. This enzyme was stable at pH $7.0{\sim}9.0$. 3. This enzyme was not inactivated by treatment in lower temperature than $30^{\circ}C$. 4. The activity of this enzyme was strongly inhibited by $Hg^{++}$ and $Cu^{++}$, but slightly by $Ag^+$ 5. This enzyme was not inhibited by cystein, thiourea, ${\varepsilon}-aminocaproic$ acid, 2, 4-DNP, EDTA but strongly inhibited by PCMB.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.281-283
• /
• 2003

High temperature superconducting power cable requires forced flow cooling. Liquid nitrogen is circulated by a pump and cooled back by cooling system. Typical operating temperature range is expected to be between 65K and 80K. Subcooler heat exchanger uses saturated liquid nitrogen boiling on the shell side to subcool the circulating liquid nitrogen stream that cools the HTS cable. The paper describes performance tests of the cooling system. The test items are heat exchanging performance of subcooler. pressure drop between supply and return lines, heat transfer coefficient inside former, cable cryostat heat leak and simulation of electrical load of HTS cable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.42-45
• /
• 2003

Inorganic polymer based hybrid membranes consisting of zirconium oxide and polydimethylsiloxane (PDMS) have been synthesized by sol-gel processes. The hybrid membranes showed thermal stability and flexibility up to $300^{\circ}C$. The membrane becomes proton conducting polymer electrolyte when added with 12-phosphotungstic acid (PWA). The conductivity of the membranes was measured in the temperature range from room temperature to $150^{\circ}C$ under saturated humidity and a maximum conductivity of $5{\times}10^{-5}\;Sm^{-1}$ was obtained at $150^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.56-56
• /
• 2010

We report a low-temperature fabrication of organic/inorganic nanohybrid dielectrics for organic thin film transistors. The self-assembled organic layers (SAOLs) were grown by repeated sequential adsorptions of C=C-terminated alkylsilane and metal (Al or Ti) hydroxyl with ozone activation, which was called "molecular layer deposition (MLD)". The $TiO_2$ and $Al_2O_3$ inorganic layers were grown by ALD, which relies on sequential saturated surface reactions resulting in the formation of a monolayer in each sequence and is a potentially powerful method for preparing high quality multicomponent superlattices. The MLD method combined with ALD (MLD-ALD) was applied to fabricate SAOLs-$Al_2O_3$-SAOLs-$TiO_2$ nanohybrid superlattices on polymer substrates at relatively low temperature. The MLD method is an ideal fabrication technique for various flexible electronic devices.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.33-37
• /
• 1984

The net enthalpy changes for the water desorption of sun-cured tobacco have been studied. In order to compare the values of net enthalpy changes for the samples at the same moisture contents, correlation analyses have been performed. The results are summarizing as followings : 1 . As temperature and water vapor pressure increased, equlibrium moisture content were approaching to the saturated vapor pressure of water. 2. The values of 1nP against the reciprocal of absolute temperature were linear for the water desorption of samples. 3. Multiple regression was analyzed to calculate the values of 1nP at the same moisture content. The significance of $x^2$-test for the multiple regression was 0.5%. 4. The values of net enthalpy changes for Basma were greater than those of Sohyang at the same moisture content.