• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.6
• /
• pp.105-114
• /
• 2007

This study is to predict the spatial expansion of urban areas by applying CA(Cellular Automata)-Markov technique considering MCE(multi-criteria evaluation) and MOLA(multi-objective land allocation) of factor analysis. For the 10 administration districts$(3677.3km^2)$ including the whole Anseong-cheon watershed, the past six temporal land use data(1973, 1981, 1985, 1990, 1994, 2000) from Landsat satellite images were prepared. During this period, the urban area increased $233.71km^2$. Using the 36 indices composed of topological characteristics, population and land use change, the final factor map of MOLA was produced through 5 maps of MCE. Using 1990 and 1994 land use data, the 2000 predicted urban area of CA-Markov with factor map showed 0.06% improvement of absolute error comparing with that of CA-Markov without factor map. By the CA-Markov technique considering factor map, the 2030 and 2060 urban area increased $58.94km^2(0.78%)\;and\;60.14km^2(0.81%)$ respectively comparing with 2000 urban area$(313.19km^2)$. The 2030 and 2060 paddy area decreased $93.28km^2(2.54%)\;and\;93.65km^2(2.55%)$ respectively comparing with 2000 paddy area$(1383.23km^2)$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.163-168
• /
• 1995

There are four types of color model to repesent color, which are RGB, IHS, CMY, and YIQ color model. RGB color model is the designation of the digital numbers(DNs) of the three primary colors(red, green, and blue), which are used to produce color images on color monitors. IHS color model is the designation of in-tensity, hue, and saturation(IHS). An advantage of considering color in terms of IHS over that of RGB is arrives more easily at a desired color product mathematically. In this study, authors use the IHS transformation and in-tensity-adjustment method to produce the color map images with Landsat TM and scanned map image. And, authors suggest the problems and their solutions when users produce the desired new images with satellite images and map images.

• Journal of Forest and Environmental Science
• /
• v.40 no.1
• /
• pp.24-34
• /
• 2024

Fire, being primarily a natural phenomenon, is impossible to control, although it is feasible to map the forest fire risk zone, minimizing the frequency of fires. The spread of a fire starting in any stand in a forest can be predicted, given the burning conditions. The natural cover of the land and the safety of the population may be threatened by the spread of forest fires; thus, the prevention of fire damage requires early discovery. Satellite data and geographic information system (GIS) can be used effectively to combine different forest-fire-causing factors for mapping the forest fire risk zone. This study mainly focuses on mapping forest fire risk in the Madikhola watershed. The primary causes of forest fires appear to be human negligence, uncontrolled fire in nearby forests and agricultural regions, and fire for pastoral purposes which were used to evaluate and assign risk values to the mapping process. The majority of fires, according to MODIS events, occurred from December to April, with March recording the highest occurrences. The Risk Zonation Map, which was prepared using LULC, Forest Type, Slope, Aspect, Elevation, Road Proximity, and Proximity to Water Bodies, showed that a High Fire Risk Zone comprised 29% of the Total Watershed Area, followed by a Moderate Risk Zone, covering 37% of the total area. The derived map products are helpful to local forest managers to minimize fire risks within the forests and take proper responses when fires break out. This study further recommends including the fuel factor and other fire-contributing factors to derive a higher resolution of the fire risk map.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.73-82
• /
• 2021

Rural roads are the significant infrastructure for developing and managing the rural areas, hence the utilization of the remote sensing datasets for managing the rural roads is necessary for expanding the rural transportation infrastructure and improving the life quality of the rural residents. In this research, the two different methods such as image classification and image segmentation were compared for mapping the rural road based on the given high-resolution satellite image acquired in the rural areas. In the image classification method, the deep learning with the multiple neural networks was employed to the given high-resolution satellite image for generating the object classification map, then the rural roads were mapped by extracting the road objects from the generated object classification map. In the image segmentation method, the multiresolution segmentation was employed to the same satellite image for generating the segment image, then the rural roads were mapped by merging the road objects located on the rural roads on the satellite image. We used the 100 checkpoints for assessing the accuracy of the two rural roads mapped by the different methods and drew the following conclusions. The image segmentation method had the better performance than the image classification method for mapping the rural roads using the give satellite image, because some of the rural roads mapped by the image classification method were not identified due to the miclassification errors occurred in the object classification map, while all of the rural roads mapped by the image segmentation method were identified. However some of the rural roads mapped by the image segmentation method also had the miclassfication errors due to some rural road segments including the non-rural road objects. In future research the object-oriented classification or the convolutional neural networks widely used for detecting the precise objects from the image sources would be used for improving the accuracy of the rural roads using the high-resolution satellite image.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.259-268
• /
• 2006

The use of GPS receiver at outer space becomes common in low earth orbit. Recently most of satellites use GPS receiver as navigation solution for finding satellite position. However, the accuracy of navigation solution acquiring directly from GPS receiver is not enough in satellite application such as map generation. Post-processing concepts such as Precise Orbit Determination (POD) are recently applied to satellite data processing to improve satellite position accuracy. The POD uses raw measurement data instead of navigation solution of GPS receiver. The performance of raw measurement data depends on raw measurement data accuracy and tracking loop algorithm of GPS receiver. In this paper, a method for evaluating performance of raw measurement data is suggested. Test environment and procedure of the low earth orbit satellite acquiring for navigation solution of GPS receiver and navigation solution of POD are described. In addition, accuracy on navigation solution of GPS receiver, raw measurement data, and navigation solution of POD are analyzed. The proposed method can be applicable to general low earth orbit satellite.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.135-143
• /
• 2012

Remote sensing which observes repeatedly the whole Earth and GIS-based decision-making technology have been utilized widely in disaster management such as early warning monitoring, damage investigation, emergent rescue and response, rapid recovery etc. In addition, various countermeasures of national level to collect timely satellite imagery in emergency have been considered through the operation of a satellite with onboard multiple sensors as well as the practical joint use of satellite imagery by collaboration with space agencies of the world. In order to respond heavy snowfall disaster occurred on the east coast of the Korean Peninsula in February 2011, snow-covered regions were analyzed and detected in this study through NDSI(Normalized Difference Snow Index) considering reflectance of wavelength for MODIS sensor and change detection algorithm using satellite imagery collected from International Charter. We present the application case of National Disaster Management Institute(NDMI) which supported timely decision-making through GIS spatial analysis with various spatial data and snow cover map.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.65-71
• /
• 2012

Recently the high-resolution satellite images are helpfully using the land cover, status data for the natural resources or environment management. The effective satellite analysis process for these satellite images that require high investment can be increase the effectiveness has become increasingly important. In this Study, the statistical value of the training data is calculated and analyzed during the preprocessing. Also, that is explained about the maximum likelihood classification of traditional classification method, artificial neural network (ANN) classification method and Support Vector Machines(SVM) classification method and then the IKONOS high-resolution satellite imagery was produced the land cover map using each classification method. Each result data had to analyze the accuracy through the error matrix. The results of this study prove that SVM classification method can be good alternative of the total accuracy of about 86% than other classification method.

• Asian Journal of Business Environment
• /
• v.13 no.2
• /
• pp.9-20
• /
• 2023

Purpose: This study aims to map the spatial distribution of poverty using nighttime light satellite images as a proxy indicator of economic activities and infrastructure distribution in D.I Yogyakarta, Indonesia. Research design, data, and methodology: This study uses official poverty statistics (National Socio-economic Survey (SUSENAS) and Poverty Database 2015) to compare satellite imagery's ability to identify poor urban areas in D.I Yogyakarta. National Socioeconomic Survey (SUSENAS), as poverty statistics at the macro level, uses expenditure to determine the poor in a region. Poverty Database 2015 (BDT 2015), as poverty statistics at the micro-level, uses asset ownership to determine the poor population in an area. Pearson correlation is used to identify the correlation among variables and construct a Support Vector Regression (SVR) model to estimate the poverty level at a granular level of 1 km x 1 km. Results: It is found that macro poverty level and moderate annual nighttime light intensity have a Pearson correlation of 74 percent. It is more significant than micro poverty, with the Pearson correlation being 49 percent in 2015. The SVR prediction model can achieve the root mean squared error (RMSE) of up to 8.48 percent on SUSENAS 2020 poverty data.Conclusion: Nighttime light satellite imagery data has potential benefits as alternative data to support regional poverty mapping, especially in urban areas. Using satellite imagery data is better at predicting regional poverty based on expenditure than asset ownership at the micro-level. Light intensity at night can better describe the use of electricity consumption for economic activities at night, which is captured in spending on electricity financing compared to asset ownership.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.339-353
• /
• 2023

As the availability of high-resolution satellite imagery increases, improvement of positioning accuracy of satellite images is required. The importance of orthorectified images is also increasing, which removes relief displacement and establishes true localization of man-made structures. In this paper, we performed automated extraction of building rooftops and total building areas within original satellite images using the existing building height database. We relocated the rooftop sin their true position and generated an orthorectified building layer. The extracted total building areas were used to blank out building areas and generate true orthographic non-building layer. A final orthorectified image was provided by overlapping the building layer and non-building layer.We tested the proposed method with KOMPSAT-3 and KOMPSAT-3A satellite images and verified the results by overlapping with a digital topographical map. Test results showed that orthorectified building layers were generated with a position error of 0.4m.Through the proposed method, the feasibility of automated true orthoimage generation within dense urban areas was confirmed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

Recently the dramatical development of domestic spatial information technology and the successful construction of Korea NGIS(Nation Geographic Information System) have been the foundation of the scientific national territory utilization and management. However, there still exists the original problems to construct the thematic maps for supporting the various administrative services because administrative officials tend to depend on paper maps and inventories to generate spatial information, process, upgrade and manage. In this situation, there is a greater need to develop GIS system for the effective construction of various thematic maps. In this study, the satellite image based high accurate e-thematic construction and management system was developed to support the forest administrative service such as generating user based forest thematic maps, modifying them, analyzing and outputting through GIS, GPS and satellite images. For the case study, the previous forest paper map of Jeju Island was converted in format of raster and vector data using satellite images to maintain more exact location information so that this system helps to manage domestic spatial information scientifically and effectively within shorter time then support the standard for domestic spatial information. Moreover, this system plays the role of DSS(Decision Supporting System) for forest administrative affairs by integrating the attribute data, managing the GPS data and linking the multimedia data. For this, the additional main objective of this study was acquired powerful GIS component, which is called as e-mapping component, so that it could be regarded as enabling interoperability and reusability within this application. For the future works, the essential element idea and technology in this study could be applied very usefully to other official works such as constructing thematic maps and supporting the desired affairs.