• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

Since its launching on 21 December 1999, the KOrea Multi-Purpose SATellite-Ⅰ (KOMPSAT-Ⅰ) has been successfully operated by the Mission Control Element (MCE), which was developed by the Electronics and Telecommunications Research Institute (ETRI). Most of the major functions of the MCE have been successfully demonstrated and verified during the three years of the mission life of the satellite. The Mission Analysis and Planning Subsystem (MAPS), which is one of the four subsystems in the MCE, played a key role in the Launch and Early Orbit Phase (LEOP) operations as well as the on-orbit mission operations. This paper presents the operational performances of the various functions in MAPS. We show the performance and analysis of orbit determinations using ground-based tracking data and GPS navigation solutions. We present four instances of the orbit maneuvers that guided the spacecraft from injection orbit into the nominal on-orbit. We include the ground-based attitude determination using telemetry data and the attitude maneuvers for imaging mission. The event prediction, mission scheduling, and command planning functions in MAPS subsequently generate the spacecraft mission operations and command plan. The fuel accounting and the realtime ground track display also support the spacecraft mission operations. We also present the orbital evolutions during the three years of the mission life of the KOMPSAT-Ⅰ.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.127-132
• /
• 2009

This paper represents the analysis and design of the generic mission operations system for next generation satellite mission. In the past, mission operations systems were developed by their own mission requirements respectively. However, these systems have the similar architecture and common functions. Mission operations systems, in general, consist of mission independent module and mission specific module. In this paper, the generic framework for the mission scheduling and automation are introduced and analyzed. Using these generic frameworks, the risk and cost for operations system development can be reduced significantly. And, these frameworks might be used for the core technology in the development of mission operations system in the future.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.415-424
• /
• 2006

In this paper, requirements of Meteorological Administration about Meteorological Image. (MI) of Communications, Ocean and Meteorological Satellite (COMS) is analyzed for the design of COMS ground station and according to the analysis results, the distribution image size of each observation area suitable for satellite Field Of View (FOV) stated at the requirements of meteorological administration is determined and the precise satellite FOV and the size of distribution image is calculated on the basis of the image size of the determined observation area. The results in this paper were applied to the detailed design for COMS ground station and also are expected to be used for the future observation scheduling and the scheduling of distribution of user data.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.241-241
• /
• 2002

MSC(Multi-Spectral Camera) is a main payload of KOMPSAT(Korea Multi-Purpose Satellite)-II which will be launched in 2004. MSC will perform his mission with the GSD(Ground Sample Distance) of 1m, swath width of 15km and spectral range of 450nm~900nm at the altitude of 685km. MSC consists of three main subsystems. One is EOS(Electro-Optics Subsystem), another is PMU(Payload Management Unit) and the other is PDTS(Payload Data Transmission Subsystem). There is an SBC(Single Board Computer) in the PW to control all the other units and SBC software performs the interface with spacecraft and control all MSC sub-units. SBC software consists of a lot of tasks and manages them with the time criticalness. All tasks are designed to be scheduled and executed at the predetermined time in order to make sure that the mission of MSC system is achieved successfully. In this paper, the real-time task scheduling of the SBC software will be described and analyzed.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.49-56
• /
• 2012

LEO Satellite performs the operations and missions by FSW(Flight Software) after separation from a launch vehicle. Many of the operations by FSW are automatically conducted by the algorithms of FSW. In the case of the IAC(Initial Activation and Checkout) operations, a mission scheduling, an orbit transition, etc, however, a decision and a control of the satellite operators or manufacturers are required in order to operate the satellite safely. For this, the wireless communication channel between a satellite and a ground station should be prepared to receive telemetries and to transmit tele-commands for controlling FSW properly. Therefore, the verification of the interface between KOMPSAT-3 and a ground station is essential. This verification test is named the satellite end-to-end test. In this paper, we show the design process of the satellite end-to-end test and test results.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.127-133
• /
• 2014

In this paper, we present the design, functions and performance analysis of the virtual machine (VM) based on the Lua interpreter for On-Board Control Procedure Execution Environment (OEE). The development of the OEE has been required in order to operate the lunar explorer mission autonomously which is planned by Korea Aerospace Research Institute (KARI) autonomously. The concept of On-Board Control Procedure (OBCP) is already being applied to the deep space missions with a long propagation delay and a limited data transmission capacity since it ensure he autonomy of the mission without the ground intervention. The interpreter is the execution engine in the VM and it interpreters high-level programming codes line by line and executes the VM instructions. So the execution speed is very more slower than that of natively compiled codes. In order to overcome it, we design and implement OEE using register-based Lua interpreter for execution engine in OEE. We present experimental results on a range of additional hardware configurations such as usages of cache and floating point unit. We expect those to utilized to the OBCP scheduling policy and the system with Lua interpreter.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.501-504
• /
• 2004

There is a world-wide trend to implement autonomous TM/TC system in satellite operations. KARI developed CALS(Command AutoLoader System) for KOMPSAT-1 operation automation in 2004. This paper provides system requirement, system design, system test and operational procedure. Through test with simulator and KOMPSAT-1, CALS was verified to meet all functional and operational requirement like scheduling, real-time telemetry check, CRC generation, command grouping. CALS is expected to be used in KOMPSAT-1 normal mission operation in end of 2004