• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.21-30
• /
• 2020

In this paper, we predicted the propagation loss for the air-to-ground (A2G) channel between the ground control system and the unmanned aerial vehicle (UAV) using the prediction model for the aircraft recommended by the International Telecommunication Union (ITU). We analyzed the network coverage of the aerial relay system based on the medium altitude UAVs by expanding it into the air-to-air (A2A) channel. Climate and geographic factors in Korea were used to predict propagation loss due to atmospheres. We used the measured data published by the Telecommunication Technology Association (TTA) for regional rainfall-rate and effective earth radius factors to increase accuracy. In addition, the aerial relay communication system used the key parameter of the common data link (CDL) system developed in Korea recently. Prediction results show that the network coverage of the aerial relay system broadens at higher altitude.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1026-1031
• /
• 2002

In this Paper, We analysed the technical characteristics of a automatic identification system that will introduce in aviation and marine radio stations. IMO's Marine Safety Committee approved revision of chapter V of the Safety of Life at Sea(SOLAS) Convention in 73rd meeting. According to this, AIS will become a mandatory carriage requirement by 01 July 2002. AIS as a surveillance system continuously receives its own position from the GNSS and then repeatedly broadcasts it on a W:.u data link for avoiding traffic conflicts and possible disasters. VHF data link is organized so that a specified number of time slots make up a repeatable frame. Each radio station can autonomously allocate and deallocate slots within the frame using selection algorithm which is called SOTDMA(Self-Organized Time Division Multiple Access). The results can be an aid in the continued of understanding technical characteristics for AIS as a broad surveillance system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.187-191
• /
• 2002

In this paper, We analysed the technical characteristics of a automatic identification system that will introduce in aviation and marine radio stations. IMO's Marine Safety Committee approved revision of chapter V of the Safety of Life at Sea(SOLAS) Convention in 73rd meeting. According to this, AIS will become a mandatory carriage requirement by 01 July 2002. AIS as a surveillance system continuously receives its own position from the GNSS and then repeatedly broadcasts it on a VHF data link for avoiding traffic conflicts and possible disasters. VHF data link is organized so that a specified number of time slots make up a repeatable frame. Each radio station can autonomously allocate and deallocate slots within the frame using selection algorithm which is called SOTDMA(Self-Organized Time Division Multiple Access). The results can be an aid in the continued of understanding technical characteristics for AIS as a broad surveillance system.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.338-347
• /
• 2017

This paper describes the design and fabrication of a high power amplifier which is a component of TDL(Tactical Data Link) aircraft terminal. We applied high-speed frequency hopping technology, cognitive radio technology, and receive filter bank technology to efficiently use limited frequency resources with radar and other communication equipment using the same frequency band. The high-power amplifier is physically composed of a transmitter, a receiver, a mechanical part, and a cable assembly, and is designed to meet temperature characteristics and electrical characteristics such as maximum transmission distance and reception sensitivity. Modeling and simulator were used to satisfy the requirement of high power amplifier. The transmit power and the noise figure were measured at 50.02dBm and 2.682dB, respectively. It was confirmed that all the required specifications were satisfied in the electrical characteristics test and the environmental characteristic test.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.514-521
• /
• 2018

COSPAS-SARSAT 406 MHz emergency beacons include ELTs for aviation, EPIRBs for maritime, and PLBs for individuals in distress. They are used to sending messages encoded on 406 MHzdistress frequency and sending alertsfor search and rescue in distress. C/S T.001 and T.018 are COSPAS-SARSAT technical documents. They include basic technical information needed for developing beacons, howmessages are constructed, and test methods for type approval. COSPAS-SARSAT systems that use existing low earth orbit (LEO) and geostationary earth orbit (GEO) satellites do not have a return link service (RLS). So, the survivors could not confirm whether the distress signal was sending or not. However, a new medium earth orbit (MEO)satellite system has been added to thissystem, allowing confirmation through the RLS function. This paper analyzed C/S T.001 and T.018 needed to develop navigation structuresthat incorporated improved PLB of 406 MHz, a homing signal generator of 121.5 MHz, and a VHF AM transmitter for aviation of 243 MHz.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.95-99
• /
• 2005

This paper presents an accurate recovery method of the reference clock which is needed for network synchronization in two-way satellite multimedia systems compliant with DVB-RCS specification and which use closed loop method for burst synchronization. In these systems, the remote station transmits TDMA burst via return link. For burst synchronization, it obtains reference clock from program clock reference (PCR) defined by MPEG-2 system specification. The PCR is generated periodically at the hub system by sampling system clock which runs at 27MHz $\pm$ 30ppm. Since the reference clock is recovered by means of digital PLL(DPLL) using imprecise PCR values due to variable random jitter, the recovered clock frequency of remote station doesn't exactly match reference clock of hub station. We propose a robust recovery method of reference clock against random delay jitter The simulation results show that the recovery error is remarkably decreased from 5 clocks to 1 clock of 27MHz relative to the general DPLL recovery method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3551-3567
• /
• 2016

The Low Earth Orbit satellite network has the unique characteristics of the non-uniform and time-variant traffic load distribution, which often causes severe link congestion and thus results in poor performance for delay-sensitive flows, especially when the network is heavily loaded. To solve this problem, a novel adaptive routing algorithm, referred to as the delay-oriented adaptive routing algorithm (DOAR), is proposed. Different from current reactive schemes, DOAR employs Destination-Sequenced Distance-Vector (DSDV) routing algorithm, which is a proactive scheme. DSDV is extended to a multipath QoS version to generate alternative routes in active with real-time delay metric, which leads to two significant advantages. First, the flows can be timely and accurately detected for route adjustment. Second, it enables fast, flexible, and optimized QoS matching between the alternative routes and adjustment requiring flows and meanwhile avoids delay growth caused by increased hop number and diffused congestion range. In addition, a retrospective route adjustment requesting scheme is designed in DOAR to enlarge the alternative routes set in the severe congestion state in a large area. Simulation result suggests that DOAR performs better than typical adaptive routing algorithms in terms of the throughput and the delay in a variety of traffic intensity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.530-538
• /
• 2011

In this paper, the feasibility of LEO(low earth orbit) satellite-based automatic identification system (SAT-AIS) for the coastal area of the South Korea is evaluated in the context of ship AIS transmission detection probability. We evaluate and compare AIS signal detection probability of ORBCOMM satellites and LEO-one satellites considering link budget, SOTDMA protocol and satellite's swath width. The simulation determines the total number of vessels served by those satellites according to satellite's swath width and thus, By simulation results, the ORBCOMM SAT-AIS system outperforms LEO-one SAT-AIS system. The suggested ORBCOMM based SAT-AIS system can be a solution to resolve the existing limited transmission distance problem of the conventional ship-to-shore AIS system.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.67-72
• /
• 2020

Satellite communication is not used by many people like mobile communication, but it is a necessary technology for public service and communication services, such as providing the Internet in military, disaster, remote education and medical services, island areas, and infrastructure vulnerable areas. However, on ships and aircraft, mobile communications requiring base stations are either unavailable or restricted in their use. In this paper, we used a Raspberry Pi board as the terminal device to communicate network through satellite modem and PPP protocol, and implemented two-way data link using the text message of the modem to connect to the Thuraya geo-stationary orbit network. In addition, I/O devices were connected to the controller of the terminal equipment to design and implement an IoT device system for ships that can remotely access the system under control and control I/Os and transmit measured data through various sensors.

• Journal of the Society of Disaster Information
• /
• v.1 no.1
• /
• pp.91-119
• /
• 2005

When the national disaster accident is occurred, it is difficult to maintain the mutual cooperation systems. In order to solve the problems, the construction of the national unified command wireless network is necessary. In this paper, the specified state of the characteristic frequency of the digital TRS wireless network constructed recently is investigated and analyzed. Through the analysis, the problems of the construction of the national unified command wireless network are grasped. To solve the problem, it is proposed that the digital TRS wireless network is connected with the satellite communication network, and connected with the existing wireless network, LMR. In the concretely it is proposed that the natural unified wireless network should be proceeded step by step. At first, for 2 years the existing networks of the Fire Fighting Agency, the Police, the Forest Service and so on must be utilized and prepared to link with TRS. The second, for 2 years it is carried forward a scheme to maintain the properties of the agencies concerned. Further, it must be prepared to connect with satellite network. At third, for 2 years all agencies concerned with the fire fighting and the disaster prevention must be unified, and the systems have to be promoted for the p1an of linkage of TRS network and the existing network. Next the agencies concerned have to be unified and the authority has to be intensified. When a disaster is occurred, the National Emergency Management Agency has to play a central role. In a local area it has to be given the Fire Fighting Agency an authority and a duty to get ready for each emergency situation.