• The Korean Journal of Emergency Medical Services
• /
• v.13 no.1
• /
• pp.87-96
• /
• 2009

Purpose : To grasp the mental burden for legal responsibility that rescue members have in the performance of job. Method : Questionnaire was presented to rescue members serving in 2 direct control safety centers of fire station located in Seoul, Daejon, Incheon, Kwangju, Busan, Daegu and Ulsan. Results : 1. Questioned whether they have mental burden for legal responsibility while performing job on the site, the rescue members responded : very burdensome in 38.0%, burdensome in 56.0%, moderate in 4.5%, not burdensome in 1.0%, no burden at all in 0.5%. 2. Questioned on the first aid treat for which they have the most mental burden, the rescue members responded : intubation into trachea laryngeal mask airway(LMA) in 40.4%, automatic external defibrillator in 16.3%, securing vein providing sap(medicine) in 10.8%, basic cardiopulmonary resuscitation in 7.2%, eliminating foreign matters inserted into body in 5.4%, stanching external bleeding and treating injury in 5.4%, fixing extremities and spine by using splint in 1.8%, measuring the symptom of vitality in 1.2%, providing oxygen in 0.0%. 3. Questioned whether experiencing legal problem or firm petition(complaint) raised by patient while serving as rescue members, they responded : experiencing a complaint in 41.6%, experiencing no complaint in 58.4%. Asked to indicate the stress level in the scale of which they suffered when lawsuit or firm petition was raised, 0(weak)-10(strong), they answered 8.8 in average. 4. Questioned whether 119 rescue members put the legal responsibility in case that they cause damage to patients intentionally in performing, they responded to the inquiry 3.66 in average(of 5.00). It represented meaningful differences (F=2.874, p=.024) whether they had license or not. 5. In future, legal action will raise against the rescue member by 99% because of people's rights improvement(63.1%), high expectations for the rescue system(29.5%), non-licensed rescue members(5.1%). Conclusion : It was found that the rescue members had severe mental burden for advanced life support which was investigated to have low enforcement rate in the preceding research, for instance, intubation into trachea securing vein management by using automatic external defibrillator. To improve the qualitative level of rescue service in the fire fighting, it may be required to construct the environment that eliminates the mental burden of rescue members for legal responsibility.

• Journal of Veterinary Clinics
• /
• v.30 no.6
• /
• pp.415-420
• /
• 2013

This study was performed to examine the anesthetic and cardiopulmonary effects of medetomidine, midazolam and ketamine (MMK) combination in ten beagle dogs. Dogs were randomly allocated to two groups. Treatment group MMK-L received 0.015 mg/kg medetomidine followed by 0.3 mg/kg midazolam and 5 mg/kg ketamine by intramuscular injection. Treatment group MMK-H received 0.02 mg/kg medetomidine followed by 0.3 mg/kg midazolam and 5 mg/kg ketamine by intramuscular injection. Induction, anesthesia, sternal recumbency, standing, walking time, heart rate, arterial blood pressure, rectal temperature, respiratory rate and arterial blood gases were measured. Mean anesthesia time was significantly different between MMK-L group ($52.4{\pm}11.08$ minutes) and MMK-H group ($78.2{\pm}20.72$ minutes). Sedative scores and noxious stimuli were raised to the maximum value at 5 minutes after administration of the test dose and maintained until 40 minutes in both groups. In both groups, the heart rate significantly decreased after MMK administration. The blood pressures (MAP, SAP and DAP) increased after MMK administration but there were no significant differences in blood pressures between two groups. In conclusion, intramuscular administration of medetomidine followed by intramuscular injection of midazolam and ketamine in beagle dogs, leads immediate and sufficient anesthesia and proper doses of medetomidine for minimal adverse effects in intramuscular MMK combination will be 0.015 mg/kg in dogs.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.12-24
• /
• 2017

The main purpose of this research is for the investigation on the impact of engine oil aging on PM and DPF. It is widely known that lubricant specifications and consumption from an ICE have significantly influenced on the regulated and unregulated harmful emissions as the engine operating conditions. Considering DPF clogging phenomena with lubricant-derived soot/ash components, simulated aging mode for the DPF was newly designed for engine dynamometer testing. PM/ash accumulation cycle were developed in reflecting real-world engine operating conditions for the increment of engine oil consumption and natural DPF regeneration for the ash accumulation. The test duration for DPF aging reached around 100hrs with high- and low-SAPS engine oils, respectively. Using high SAPs engine oil made more PM/ash accumulation compared with low SAPs engine oils and it could accelerate fouling of EGR in engine. Fouling of EGR made effects on more harmful exhaust gases emissions. The test results on engine lubricant under engines operating conditions will deliver for the establishment of regulated and unregulated toxic emissions policy, lubricant quality standard.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• IMMUNE NETWORK
• /
• v.14 no.1
• /
• pp.21-29
• /
• 2014

Follicular helper T ($T_{FH}$) cells are recently highlighted as their crucial role for humoral immunity to infection as well as their abnormal control to induce autoimmune disease. During an infection, na$\ddot{i}$ve T cells are differentiating into $T_{FH}$ cells which mediate memory B cells and long-lived plasma cells in germinal center (GC). $T_{FH}$ cells are characterized by their expression of master regulator, Bcl-6, and chemokine receptor, CXCR5, which are essential for the migration of T cells into the B cell follicle. Within the follicle, crosstalk occurs between B cells and $T_{FH}$ cells, leading to class switch recombination and affinity maturation. Various signaling molecules, including cytokines, surface molecules, and transcription factors are involved in $T_{FH}$ cell differentiation. IL-6 and IL-21 cytokine-mediated STAT signaling pathways, including STAT1 and STAT3, are crucial for inducing Bcl-6 expression and $T_{FH}$ cell differentiation. $T_{FH}$ cells express important surface molecules such as ICOS, PD-1, IL-21, BTLA, SAP and CD40L for mediating the interaction between T and B cells. Recently, two types of microRNA (miRNA) were found to be involved in the regulation of $T_{FH}$ cells. The miR-17-92 cluster induces Bcl-6 and $T_{FH}$ cell differentiation, whereas miR-10a negatively regulates Bcl-6 expression in T cells. In addition, follicular regulatory T ($T_{FR}$) cells are studied as thymus-derived $CXCR5^+PD-1^+Foxp3^+\;T_{reg}$ cells that play a significant role in limiting the GC response. Regulation of $T_{FH}$ cell differentiation and the GC reaction via miRNA and $T_{FR}$ cells could be important regulatory mechanisms for maintaining immune tolerance and preventing autoimmune diseases such as systemic lupus erythematosus (SLE) and rheumatoid arthritis (RA). Here, we review recent studies on the various factors that affect $T_{FH}$ cell differentiation, and the role of $T_{FH}$ cells in autoimmune diseases.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.87-99
• /
• 1993

Many studies have been reported on the successful replacement of missing teeth with osseointegrated dental Implants. However, little research has been carried out on the bio-mechanical aspect of the stress on the surrounding bone of the free-standing type of dental implant prostheses. This experimental study was aimed to analyze the stress distribution pattern on the supporting tissues depending upon the position of osseointegrated implants supporting fixed bridges. In the cases of unilateral partially edentulous mandible (the 2nd premolar and the 1st and 2nd molars missing), two osseointegrated implants were placed at the 2nd premolar and 2nd molar sites (Model A) , the 1st and 2nd molar sites (Model B, Anterior cantilevered type), the 2nd premolar and 1st molar sites (Model C, Posterior cantilevered type). Chewing forces of dentate patients and denture wearer were applied vertically on the 2nd premolar, the 1st molar, and the 2nd molar of each model. A 3-Unit fixed partial denture was constructed at each model and cantilevered extension parts were involved in Model B and Model C. Two dimensional finite element analysis was undertaken. The commercial software (Super SAP) for IBM 16 bit personal computer was utilized. The results were as follows : 1. The magnitude of applied load influenced on the total value of stresses, but did not in-fluence on the pattern of stress distribution. 2. The magnitude of stress developed from the supporting tissues were in order of Model C,Model A,Model B. 3. High stresses were concentrated on the cervical and apical portion of the implant/bone interface. 4. A difference of the stress magnitude on the implant/bone interface between mesial and distal implant was most prominant in Model C and in order of Model A and Model B. 5. The stresses developed in Model A were evenly distributed throughout both implants. 6. The stresses concentrated on the cervical portion of cantilevered side were higher in the posterior cantilevered type than in the anterior cantilevered type.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.328-333
• /
• 1983

Due to fast industrialization and reduced agricultural population, there has been increased farm mechanization to reduce the labor requirement. In rice production, mechanical transplanting has been increasingly popular due to the heavy labor requirement in hand transplanting and development of convenient transplanters. For mechanical transplanting, rice seedlings is grown in boxes with limited soils under super dense population, thus short period of exposure to unfavorable temperature and poor water management would cause severe damage to rice seedlings such as seedling damping off and the similar physiological disorders. Several chemicals were evaluated for their effectiveness to control the disease and disorders, and other effects as plant growth stimulants. 3-hydroxy-5-methylisoxazole-a soil fungicide, Metalozyl-a fungicide which controls mildew, SF 8002-the composite of above two chemicals, and Isoprothiolane-a fungicide which controls rice blast were found to be effective controling seedling damping off and similar physiological disorders, and improvement of physiological characteristics of the seedlings such as the amount of bleeding sap, rooting ability, negative geotrophism, and regrowth after cutting. The results indicated that the chemicals will be very effective raising healthy seedlings even under unfavorable environments by the improvement of physiological activities of seedlings and preventing seedling damping off and the similar physiological disorders.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.23-28
• /
• 2015

Lacquer sap extracted from lacquer trees exhibits good thermal stabilities and antimicrobial properties. To apply these superior properties to functional packaging, polyurushiol (YPUOH) powders were prepared and blended into LDPE (low density polyethylene) to prepare three different LDPE/YPUOH composite films via a twin screw extruder system. Their morphology, thermal and antimicrobial properties as well as barrier properties of the LDPE/YPUOH composite films were thoroughly investigated to find out applicablities of the films as functional packaging materials. Although the interfacial interaction between LDPE and YPUOH was relatively weak, LDPE/YPUOH composite films exhibited good dispersion of YPUOH in LDPE, resulting in the enhanced thermal stability with YPUOH loading. Due to the good antibacterial property of as-prepared YPUOH, LDPE/YUOH composite films also showed an excellent antibacterial activity (R) of 99.9% against E. coli. Furthermore, the moisture barrier property of LDPE/YPUOH composite films increased with increasing YPUOH contents. Incorporating the relatively low amount of YPUOH in LDPE resulted in the apparent enhancement in thermal stabilities, antibacterial and moisture barrier properties, which made them promising candidates as a functional filler for packaging materials.

• Parasites, Hosts and Diseases
• /
• v.30 no.4
• /
• pp.289-298
• /
• 1992

Acanthamoeba sap., free-living amoebae inhabited in moist soil, pond, freshwater, sewage, atmosphere and swimming pool, may be causative protozoa of the fatal primary amoebic meningoence-phalitis in experimental animals and humans. In this study, Acar,thamoeba spry. , including Acan. thamoeba sp. YM-4 (isolated strain from Korea) had been compared by the two-dimensional electrophoresis and hybridoma technique as well as the difference of morphological characteristics. Trophozoite of Acenthamoeba sp. YM-4 is usually uninucleate and show the hyaline filamentous projections (acanthopoda) . No aagellate stage observed. Cysts have two walls, the outer wall is nearly circular, but inner wall is oval or some irregular. As results of SDS-PAGE for Iysate of Acanthamoeba sp. VM-4, 16 major protein fractions are similiar to those of A. cuzbertsoni, but different to A. royreba and A. polyphaga. Findings of two-dimensional electrophoretic patterns of Acanthamceba sp. YM-4 are almost same to those of A. culberssoni, The isotope of monoclonal antibodies produced from McAY 6, McAY 7, McAY 8, McAY 13 and McAY 16 clones were IgGl, and McAY 10 and McAY 11 clones were IsM. As results of the cross-reactivity among various amoebae using ELISA with monoclonal antibodies, McAY 7 monoclonal antibody (molecular weight 43 kDa by EITB) was only reacted with Acanthamoeba sp. YM-4, but McAY 6 and McAY 10 monoclonal antibodies were reacted to A. cuzbertsoni as well as Acanthamoeba sp. YM-4.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.67-75
• /
• 1999

The use of composite restorative materials is established due to continuing improvements in the materials and restorative techniques. Composite resins are widely used for the restoration of cervical lesions because of esthetics, good physical properties and working time. There are several types of cavity design for class V composite resin filling, but inappropriate cavity form may affect bonding failure, microleakage and fracture during mastication. Cavity preparations for composite materials should be as conservative as possible. The extent of the preparation is usually determined by the size, shape, and location of the defect. The design of the cavity preparation to receive a composite restoration may vary depending on several factors. In this study, 5 types of class V cavity were prepared on each maxillary central incisor. The types are; 1) V-shape, 2) round(U) shape, 3) box form, 4) box form with incisal bevel and 5) box form with incisal bevel and grooves for axial line angles. After restoration, in order to observe the concentration of stress at bonding surfaces of teeth and restorations, developing a 2-dimensional finite element model of labiopalatal section in tooth, surrounding bone, periodontal ligament and gingiva, based on the measurements by Wheeler, loading force from direction of 45 degrees from lingual side near the incisal edge was applied. This study analysed Von Mises stress with SuperSap finite element analysis program(Algor Interactive System, Inc.). The results were as follows : 1. Stress concentration was prevalent at tooth-resin bonding surface of cervical side on each model. 2. In model 2 without line angle, stress was distributed evenly. 3. Preparing bevel eliminated stress concentration much or less at line angle. 4. Model with round-shape distributed stress concentration more evenly than box-type model with sharp line angle, therefore decreased possibility of fracture. 5. Adding grooves to line angles had no effect of decreasing stress concentration to the area.