• 제목/요약/키워드: Sanitary condition

검색결과 212건 처리시간 0.023초

산업용 보일러의 배연탈황 및 탈질에 관한 연구 (A Study on Desulfurization and Denitrification of Flue Gas in Industry Boiler)

  • 이태호;정순형;정흥기
    • 환경위생공학
    • /
    • 제10권3호
    • /
    • pp.99-104
    • /
    • 1995
  • The objective of this study was to investigate the effect on denuclearization and decertification of flue gas by utilizing Mg( OH)$_{2}$ and NaOH as reagents in industrial boiler. We used packed absorber with Tellerette in all cases. And pH of circulation solution, rate of liquid per gas in absorber, COD concentration by pH variation in oxidation basin were inves- tigated. The following conclusions were obtained from experimental results: 1. Concerning running cost for reagents, Mg( OH)$_{2}$ reagent for treatment of flue gas was more economical than NaOH. 2. While Mg( OH )$_{2}$ and NaOH as absorbents were used, then the ratio of denuclearization was 96 and 97% respectively and nitrification was recorded 29 and 25% . 3. In this absorption tests the optimum condition for ratio of liquid per gas, pH and nonregenerable salt concentration of circulation solution were 3.6ℓ /Nm$^{3}$, 6.0, 0.5∼1.0% respectively, 4. Initial COD in oxidation basin was 800 ∼ 1,00099ut after adjusting to pH 7.0, COD of effluent water was less than 20ppm.

  • PDF

기포탑반응기에서 연속공정을 이용한 $BaTiO_3$ 분말의 제조 (The Synthesis of $BaTiO_3$ using continuous process in a bubble column reactor)

  • 현성호;김정환;허윤행
    • 환경위생공학
    • /
    • 제11권1호
    • /
    • pp.63-70
    • /
    • 1996
  • The synthesis of high purity and ultra-fine $BaTiO_3$ by precipitation with gaseous $NH_3$ as precipitator was investigated to find an alternative process to solve various problems of recent wet methods. A synthesis process for $BaTiO_3$ powder using $NH_3$ gas as a precipitator in a bubble column reactor was experimentally successful in developing the production process of piezoelectric ceramic $BaTiO_3$ powder. And a 2.33m1/sec is approprite for the feed flow rate, $BaTiO_3$ powder produced under above the condition is spherical type, its particle size was about $0.2{\mu}m$.

  • PDF

사염화탄소의 열분해 소각에 관한 연구 (A Study on the Thermal Decomposition of Carbon Tetrachloride by Pyrolytic Incineration)

  • 이태호;정홍기
    • 환경위생공학
    • /
    • 제11권1호
    • /
    • pp.57-61
    • /
    • 1996
  • This study was to decompose carbon tetrachloride and CFC with pyrolytic incineration unit because of prohibition of their usage sooner or later. We have investigated heating value and temperature versus decomposing rate, removal of $Cl_2$ and dust in the flue gas, The results obtained were as follows; 1. In combustion condition to decompose $CCl_4$ heating value was 3,300Kcal/Kg, retention time was 2,0 sec. incinerator exit temperature was $950^{\circ}C$. 2.The removal of HCI and $Cl_2$ in flue gas used NaOH as reagent, then molar ratio o of $Na^+/Cl^-$ was 1.07. 3. NaCI of dust component was more than 90 %, 2 stage venturi scrubber was used to remove dust, then removal rate of dust was 99% over at L/G of $1.7Vm^3$

  • PDF

염색폐수의 전해처리 방법에 관한 연구 (Study on the electrochemical treatment of dye wastewater)

  • 전종남;김형수;윤용수;정일현
    • 환경위생공학
    • /
    • 제11권2호
    • /
    • pp.53-58
    • /
    • 1996
  • This study was performed to measure and evaluate the characteristics of removal efficiency and kinetics in the electrolytic decolorizing process of dye wastewater containing acid dye Red 114 by using Fe anode. The synthetic wastewater samples of 500, 1000, $2000mg/{\ell}$ concentration were tested and as an attempt to assess the feasibility of the present system for the industrial application, a sample of wastewater collected by J textile factory in Eujungbu city was also treated. It was found that the optimum conditions were pH 7, 8Volt and removal efficiency in synthetic wastewater containing $2000mg/{\ell}$ of dye and 0.2% of electrolyte (NaCl) was 99.68% after 20minutes of reaction time. In this condition, overall rate constant was $4.77{\times}10^{-5}mmol/cm^{3}hr$. The Decolorizing efficiency and COD removal efficiency of J textile factory wastewater were 99% and 86% respectively at pH 7, 8Volt for 40minutes of reaction time.

  • PDF

칡넝쿨 및 톱밥을 이용한 C/N비 조절에 따른 음식물찌꺼기의 발효특성에 관한 연구 (A Study on the Fermentation Characteristics of Garbages by the C/N Ratio Control using Kudzu Creeper and Sawdust)

  • 박진식;안철우;문추연
    • 환경위생공학
    • /
    • 제15권3호
    • /
    • pp.24-30
    • /
    • 2000
  • In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The result are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 39%(kudzu), 37%(sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/N ratio 25 indicated $68^{\circ}C$(kudzu), $70^{\circ}C$(sawdust). Optimum condition of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation gravitationally dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively. Major biological reaction in the aerobic fermentation feed production occurred during 12~24hrs.

  • PDF

제올라이트의 아황산가스흡 ${\cdot}$ 탈착특성 (Adsorption characteristics of the zeolite for flue gas desulfurization)

  • 박현희;모세영
    • 환경위생공학
    • /
    • 제18권3호통권49호
    • /
    • pp.43-47
    • /
    • 2003
  • The desorption characteristics of NaY zeolite, of which Si/Al ratio is 2.36, was measured at 25${\circ}$C and 150${\circ}$C so as to be used practically as a adsorbent for separation of sulfur oxides from flue gas, for which adsorption and desorption cycles at 25${\circ}$C were repeated four times and that at 150${\circ}$C was done one time. As a result it took 30.8 at 150${\circ}$C and 164.1 minutes in average at 25${\circ}$C to reach equilibrium condition. It means that regeneration of the NaY zeolite can be done below 150${\circ}$C so that zeolite can be used for flue gas desulfurization.

황산염이 UASB 반응조에서 혐기성 분해 반응에 미치는 영향 (The Effects of Sulfate on Anaerobic Treatment with UASB)

  • 정승현;양병수
    • 환경위생공학
    • /
    • 제13권2호
    • /
    • pp.47-56
    • /
    • 1998
  • Effects of sulfate on the anaerobic substrate utilization were evaluated using UASB (Upflow Anaerobic Sludge Blanket) reactor. Effect of sulfate on the organic removal rate was dependent on the relative amount of microorganisms in the reactor, the operational condition, and the characteristics of sludge. When the sulfate shock was applied to 0.0 - 3.0g SO$_{4}$$^{2-}$/d, more than 95% of COD removal efficiency was achieved. Therefore, if F/M ratio was kept to low sufficiently with recirculation, it is shown that operation of the reactor was not affected significantly, though sulfate shock load was doubled compared to the normal operation. Provided that it is shocked by high strength of sulfate or temporary shock load is applied frequently the efficiency of reactor may be disadvantageous as well as the wash-out of sludge will be increased by decreasing the size to the accumulated frequency of granular sludge and the size with maximum frequency.

  • PDF

칡덩굴을 이용한 남은 음식물의 발효사료화 (Fermented Feeds Production of Garbages using Kudzu Creeper as a Bulking Material)

  • 박진식;장성호;김수생
    • 환경위생공학
    • /
    • 제14권2호
    • /
    • pp.90-95
    • /
    • 1999
  • The study on the fermented feeds production of garbages have been conducted to determine the optimum operation condition. The process variables considered for this study were initial air flow rate and temperature control. The results showed that optimum air requirement was $4{\ell}-air/min{\cdot}kg-$ garbages on dry weight basis which is equal to $0.8{\ell}-air/min{\cdot}kg-$ garbages on the basis of 80% moisture content. The optimum initial temperature control in the reactor was $40^{\circ}C$. Crude fiber content of fermented final byproducts were higher than feedstuffs standard for pig breeding and consequently final byproducts had to mix with single-component feed.

  • PDF

익산시의 생활폐기물 재활용 현황 및 대책에 관한 연구 (A Study on the Present Condition and Countermeasure of Domestic Waste Recycling in Iksan city.)

  • 육찬남
    • 환경위생공학
    • /
    • 제14권4호
    • /
    • pp.29-34
    • /
    • 1999
  • 1.The domestic waste generated in Iksan city was 177 tons a day last year. 27 tons of that were recycled daily. Due to increased awareness the recycling rate also increased. 2. It is preferred to get continuous publicity and to enforce the program steadily to activate exchange centers and places like a flea market for reusable things, which will lead to increase the life-span of the current designated landfill site. 3. Because burying food waste in underground will be prohibited from year 2005, the reutilization of food waste by feeding domestic animals like ducks and making artificial fertilizer are preferred. 4. The case of Iksan city is expected to be a model to other cities by establishing a display room to accommodate its detail work demonstration, displaying modeled utilization items and exchange center, incinerator, duck ranch, lawn ground, etc. for making a city as an environmental preservation city model.

  • PDF

오미자를 이용한 Hg(I), Pb(II), U(VI) 이온들의 흡착 (Adsorption of Hg(I), Pb(II), and U(VI) ions using from Fruits of Schizandra Chinensis)

  • 김관천;김준태
    • 환경위생공학
    • /
    • 제22권1호
    • /
    • pp.29-35
    • /
    • 2007
  • This study was examined adsorption ability of heavy metal Hg(I), Pb(II), and U(Vl) ion use of fruit from schizandra chinensis, The fruits of schizandra chinensis sample used breaking into fragments $50{\sim}100$ mesh. The sample solution was mixed fruits of schizandra chinensis and heavy metal ion. Each heavy metal ion of into solution was quantum analysis with ICP-AES. As the result, each condition of maxium adsorption ability of heavy metal ion was high in the range of pH 5-7, adsorption time was about 15 minutes, and the optimum temperature was $100^{\circ}C$. The heavy metal ion was increased adsorption in order of increasing concentration and in ethanol solution better than in aqueous solution.