• 구강회복응용과학지
• /
• 제17권3호
• /
• pp.199-204
• /
• 2001

This study was to investigate the reused possibility of zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) with sprue button in the flexure strength and fracture toughness. 40 disk-shaped ceramic specimens (20 specimens: as-pressed material; 20 specimens: reused material) with approximately 1.7 mm thickness and 15 mm diameter were prepared by "lost wax" technique. The remnants(sprue buttons) were used for repressing. The surface treatments for the discs were gradually abraded with 320, 800, 1200, and 2000 grit SiC sandpaper. The specimens were evaluated their flexure strength with the biaxial flexure jig(ball-on-three balls) and their fracture toughness with Vickers Indentation-microfracture test. The Weibull moduli were calculated for biaxial flexural strength. The mean flexure strength and fracture toughness of each group were $122.2{\pm}18.3MPa$, $1.00{\pm}0.09MPa{\cdot}m^{0.5}$ (as-pressed ceramics), and $122.2{\pm}20.3MPa$, $1.01{\pm}0.10MPa{\cdot}m^{0.5}$ (reused ceramics). There were no significant differences in the strength and the fracture toughness between the as-pressed and the reused IPS Empress Cosmo ceramic (P>0.05). This implied zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) could be used one more time by reusing of sprue button in the flexure strength and fracture toughness.

• 구강회복응용과학지
• /
• 제31권1호
• /
• pp.26-32
• /
• 2015

목적: 본 연구는 상악 중절치(#11) 금속 도재 하부구조물(metal-ceramic substructure) 제작 시 반복첨가법(addition method)과 침적법(dipping method)의 차이점을 비교 분석하여 작업의 효율성의 차이를 평가하여 침적법의 활용 방안을 제시하는 것이 주요 목적이다. 연구 재료 및 방법: 주 모형과 경석고 복제모형을 제작하여 반복첨가법과 침적법으로 코핑을 각 10개씩 20개를 제작하여 실험하였다. 코핑은 경석고 지대치 모형에 고정시키고 에폭시 마운팅 컵(epoxy mounting cup)에 매몰하였다. 시편은 경화 후 절단기를 사용하여 순,설방향으로 절단하여 사포 후 디지털 현미경을 이용하여 4지점을 측정하였다. 결과: t-test를 이용하여 제작된 지대치 substructure의 측정값 평균을 비교한 결과는 전반적으로 유의한 차이가 나타나고 있다(P < 0.05). 결론: 본 연구의 결과는 금속 도재 하부구조물 제작 시 반복첨가법과 침적법의 유의적 차이가 없으므로 활용 방안으로써 제시 될 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.454-461
• /
• 2004

The purpose of this study is to compare and to evaluate the effects of the degree of saturation on the progression of artificial root caries lesion. A total of 8 human premolars without any defects and cracks selected and the cementum were removed and the teeth were cleaned with ultrasonic device and pumice without fluoride. Each tooth was sectioned into 6 pieces and they were ground with #800 sandpaper until they had a thickness of 200pm. Specimens were applied with nail vanish except for the 2-3 mm window area after application of bonding agent. Under the constant pH, the specimens were divided into 6 groups (degree of saturation: 0.1415, 0.1503, 0.1597, 0.1676, 0.1771. 0.1977). Each group was immersed in acid buffer solution for 1. 2, 3, 5 days under controlled temperature ($25^{\circ}C$) and imbibed in water and examined using the polarizing microscope. The results were as follows 1. Although the degree of saturation of demineralization solution decreased, the depth of penetration in the dentin was constant. 2. Erosion was observed on the surface of all the teeth in the group I, II. In the group III, IV, V, surfaces were not changed. The teeth in the group VI showed the more mineralized surface but not the shape of the dentinal tubules distinctively. 3. In all groups, the lesion progressed rapidly at the first day of the experiment, but increased gradually as time elapsed.

• 한국식물병리학회지
• /
• 제1권1호
• /
• pp.67-71
• /
• 1985

수원지방의 고추 포장에서 고추 열매에 검은곰팡이병이 심하게 발생하였는데, 이병 열매에서는 모두 Alternaria균이 분리되었다. 분리된 Alternaria균의 분생자경과 분생포자의 형태 및 배양적 특성을 검토한 결과, Alternaria alternate(Fries) Keissler로 동정되었다. 단포자분리하여 배양한 A. alternata의 분생포자현 탁액을 고추 열매에 무상처로 분무접종한 경우, 병반형성이 없거나 미약하게 나타났다. 그러나 사포 혹은 가열한 유리막대로 고추 열매에 상처를 준 다음 분무접종한 결과, 병반이 크게 형성되었으며, 풋고추 보다는 붉은 고추 열매에서 병원력이 더 강하게 나타났다. 파종후 60일된 고추 식물체에 A. alternata의 분생포자현탁액을 분자접종하였으나 잎과 가지에서 병이 발생하지 않았다. 1984년 7월중 수원지방의 고추 포장에서 검은곰팡이병으로 인한 고추 열매의 피해율은 $2.0\~22.5\%$였다.

• 대한치과보철학회지
• /
• 제39권4호
• /
• pp.366-375
• /
• 2001

The objective of this study was to investigate the surface contact and screw joint stability between screw and implant interface by use of sealer. The implants evaluated in this study were Steri-Oss futures(Hexlock $3.8D{\times}10mm$: Steri-Oss, Yorba Linda, CA), and Steri-Oss staight abutment. Titanium alloy screws were used to secure abutments to implants. The other titanium alloy screws applicating sealer(Impla-Seal, Implant Support Systems, Inc. Irvine, CA) were used to secure abutments to implants. In one another sample, 6kg of force was applied during simulated intraoral movements after abutment screws were secured to the implants with sealer. All samples were cross sectioned with sandpaper and polished with $0.1{\mu}m\;Al_2O_3$. Then samples were recorded with an scanning electron microscope. The results were as follows : 1. In the case of titanium alloy screw, irregular contacts and relatively large gap were present at thread mating surface. Also abutment screw/implant interface demonstrate incomplete seating and only one surface contact of threads between implant and screw. 2. In the case of titanium alloy screw applecating sealer, sealer was present between implant and screw. Therefore implant and screw had relatively close and tight contact without the presence of large gap. 3. On the other hand, in the case of titanium alloy screw applicating sealer and dynamic loading of suprastructures, sealer was partially present between implant and screw. Conclusively, sealer fills voids, creating a barrier to moisture and bacteria. In addition, loading of suprastructures may change the situation and limit the indications for gap sealing.

• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.236-241
• /
• 2009

Dracocephalum argunense Fischer ex Link (Labiatae) is a perennial herbaceous plant used as valuable materials for ornamentals, honey production, and pharmaceutics. Since seed germination of this species was quite difficult, present studies were conducted to improve the germination rate by subjecting the seeds to various environmental conditions (temperature and light) and treatments (scarification, priming and seed coating). Optimum temperature for adequate germination was 20$^{\circ}C$ though it ranged from 15$^{\circ}C$ to 25$^{\circ}C$, and low temperature treatment improved germination rate. Light was required for higher germination rate in this species. The scarification of seeds resulted in much higher germination, especially by the physical treatment with sandpaper or chemical treatment with sulfuric acid for 30 seconds. Various primers with different concentrations were treated on the seeds and it was demonstrated that low temperature enhanced germination rate, regardless of kinds and concentrations of the primers. Three treatment combinations of the primers, 0.5 mM $GA_{3}$ treated for 48 hours, 0.5 mM IAA for 24 hours, and 1.0 mM IAA for 24 hours, increased the seed germination rate profoundly. Soaking treatment of inorganic salts, $KNO_{3}$ and $KH_{3}PO_{4}$, promoted germination when seeds were subjected to low temperature. Water soluble primers such as sucrose at 0.5 and 3% concentration and solid primer talc powder were effective in enhancing germination rate.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.180-187
• /
• 2001

The structure of current guides is largely illogical and without any rational use of color ordering. The shade guides are generally made of plastic (rather than the actual composite material) and do not accurately depict the true shade. translucency. or opacity of the composite resin after polymerization. To solve this problem, information based on evaluations of natural teeth and material that use the same method and experimental conditions is necessary. The present investigation measured the color of natural maxillary anterior teeth in vivo and compared the results with those of composite resins. 269 Korean subjects were selected for this study. Intact central incisor. lateral incisor. and canine were selected. The clinical crowns were free of caries or restorations. The middle site of the coronal portion on the labial surface of the tooth was measured by Chroma Meter. The five light activated. resin-based materials (Amelogen, Denfil, Elitefil, Spectrum, Z100) were used in this study. Resin composite was condensed into plastic mold with a diameter of 8mm and a thickness of 4mm. pressed between glass plates to flatten the surfaces. and polymerized using a Visilux II visible light activation unit. The surfaces were polished sequentially on wet sandpaper. Color measurements of each specimen were accomplished by Chroma Meter. A computer program that compares each tooth color with each composite resin color was written and the minimum CIELAB color difference ($\Delta$E$^*$) between tooth and each material was calculated. Under the conditions of this study: 1. Teeth tend to become darker with advancing age. 2. Canines were darker. more yellow. and less green than incisors. 3. The teeth from the women were lighter. more green. and less yellow than the male teeth. 4. In general. composite resins were lighter. more green. and less yellow than teeth. Deficiencies were noted in Hues in YR range. 5. Mean color differences between the five composite resin products and teeth were detectable to the naked eye($\Delta$E$^*$>1.0). 6. In comparing the mean $\Delta$E$^*$ values of materials. Spectrum showed the least followed by Z100, Elitefil, Amelogen, Denfil in increasing order.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.297-305
• /
• 2001

Statement of problem. There have been previous studies about instability according to screw material by means of calculating preload in tightening screw or recording of the torque necessary to loosen screw after tightening screw. Purpose. The purpose of this study was to evaluate screw joint stability through the analysis of fitness at the mating thread surfaces between implant and screw after tightening screws made of different materials. Material and methods. In this study, screws were respectively used to secure a cemented abutment to a hexlock implant fixture; teflon coated titanium alloy screw and titanium alloy screw(Steri-Oss), gold-plated gold-palladium alloy screw and titanium alloy screw(Implant Innovation), gold screw and titanium screw(AVANA Dental Implant System). Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10minutes. All samples were cross sectioned with sandpaper and polished. Then samples were evaluated with an scanning electron microscope analysis. Results. In titanium alloy screw, irregular contact and relatively large gap was present at mating thread surface. Also in teflon-coated titanium screw, incomplete seating and only partially contact was present at the mating thread surface. In gold-plated gold-palladium alloy screw, relatively close and tight contact without the presence of large gap was present by existing of gold coating at the mating thread surfaces. In gold alloy screw, relatively small gap between the mating components was seen. Conclusions. This result suggested that gold plated gold-palladium alloy screw and gold alloy screw achieved a greater degree of contact at the mating thread surfaces compared to titanium alloy screw and teflon-coated titanium alloy screw.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.67-81
• /
• 2021

본 연구에서는 인천 십정동 유적에서 출토된 목관(1호 회곽묘)에 대해 연륜연대와 사용된 재료를 확인하고자 진행하였다. 목관부재 10점에 대한 수종은 모두 소나무류로 확인되었다. 정확한 연륜측정을 위해 사포를 이용하여 횡단면을 연마하였다. 연륜폭은 이용하여 0.01 mm 정확도로 측정하였다. 5점의 부재들은 서로 간에 일치하였기 때문에 83년간의 대표연륜연대기가 작성되었다. 작성된 대표연륜연대기는 표준연륜연대기들과 비교를 통해 목관의 최외각 연륜은 1575년으로 확인되었고, 16세기 후반에 목관이 제작된 것으로 판단하였다. 또한 목관 표면에 부착된 섬유에 대해 현미경관찰 및 FT-IR분석을 통해 견섬유가 사용된 것을 확인할 수 있었으며, 목관 표면에 칠해져 있던 칠은 FT-IR, Py-GC/MS 분석으로 옻칠임을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.107-120
• /
• 1996

복합레진은 조작이 용이하고 강도가 우수하며 중합시간이 짧고 법랑질과 상아질에 접착이 가능하며 연마성이 뛰어나고 자연스러운 색상을 나타내므로 심미적 수복에 가장 일반적으로 선택되는 재료의 하나이다. 대부분의 복합레진 kit에는 shade guide가 포함되어 있어 이를 기준으로 중합된 후의 복합레진 색조를 예상하여 선택하게 된다. 그러나 이러한 shade guide들은 대개 복합레진이 아닌 plastic으로 제조된 것으로 중합된 복합레진의 실제 색조와는 차이가 생기게 되며 결국 shade guide 자체의 문제점으로 인해 이상적인 색조선택이 어려워진다. 이에 본 연구에서는 국내에 시판되고 있는 5종의 복합레진 제품을 선정하여 분광 광도계를 이용해서 shade guide와 중합된 복합레진 사이의 색조차이를 측정, 비교 연구하였다. 직경 16mm. 두께 1.6mm의 plastic mold에 5종의 광중합형 복합레진(Z100, Prisma TPH, Tetric, Silux Plus, Herculite XR)을 충전하고 응축기에 넣어 압축한 후 제조사의 지시에 따라 광중합기로 중합시킨 후 mold에서 시편을 제거하여 보관했다가 젖은 sandpaper 상에서 순차적으로 연마하였다. shade guide는 step부분을 갈아내어 복합레진 시편과 동일한 두께로 만든후 연마하였다. 분광광도계에 shade guide를 넣고 CIE illuminant D65 하에서 spectral reflectance를 측정하고 해당 색조의 복합레진 시편도 통일한 방법으로 측정하고 $L^*$, $a^*$, $b^*$값과 ${\Delta}E^*$값을 얻은후 분석하여 다음과 같은 결과를 얻었다. 1. Z100의 D3, A3, B2 shade와 Prisma TPH의 B2 shade를 제외한 모든 시편에서 shade guide와 복합레진간에 육안으로 인지할 수 있는 색차(${\Delta}E^*$ > 1.0)가 관찰되었다. 2. 평균적으로 Z100이 가장 적은 색차를 나타내었고 Prisma TPH, Tetric, Silux Plus, Herculite XR 순으로 색차가 증가하였다. 3. Prisma TPH의 A2 shade. Tetric의 W shade. Silux Plus의 YB, U shade, Herculite XR의 L, LY shade는 ${\Delta}E^*$값이 3.3 이상으로 나타났다. 4. Z100, Prisma TPH, Tetric, Silux Plus에서는 복합레진보다 shade guide가 더 높은 $L^*$값을 보이는 경향이 나타났으며, Herculite XR에서만 복합레진이 더 높은 $L^*$값을 나타냈다. 5. 모든 시편에서 $b^*$ 값은 (+)로 관찰되었고, Z100, Prisma TPH, Tetric, Silux Plus의 shade guide는 복합레진에 비해 높은 $b^*$값을 보였다. 6. 모든 시편에서 $a^*$값은 (-)로 관찰되었고. Herculite XR 및 Silux Plus에서는 복합레진이 shade guide 에 비 해 낮은 $a^*$값을 나타냈다.