• 제목/요약/키워드: Sampling time increment

검색결과 10건 처리시간 0.029초

정상 에르고드성을 가지는 확률과정 스펙트럼에 대한 합리적 시계열 데이터 확보 (Data Acquisition of Time Series from Stationary Ergodic Random Process Spectrums)

  • 박준범;김경수;정준모;김재우;유창혁;하영수
    • 한국해양공학회지
    • /
    • 제25권2호
    • /
    • pp.120-126
    • /
    • 2011
  • The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

코드 위상차에 따른 이산 시간 CDMA 시스템의 성능 분석 (A performance analysis of the discrete time DS/CDMA system based on the code phase difference)

  • 안병양
    • 전자공학회논문지S
    • /
    • 제35S권5호
    • /
    • pp.11-16
    • /
    • 1998
  • DS/CDMA systems for the high speed communication require high code rats. In discrete time CDMA receivers, the performance degradation, caused by the phase difference between transmission code and reference code, increase the sampling frquency of the receiver. This increment of the sampling frequency makes hard to implement high speed CDMA systems. This paper analyzes the SIR(signal to interference Ratio) performance of the discrete time DS/CDMA system, based on the code phase difference. The results of this paper may be useful to study a low-sampling CDMA receiver.

  • PDF

발전소 고온부의 수명 평가를 위한 소형 시편용 크리프 시험기의 개발 (Development of Small-Specimen Creep Tester for Life Assessment of High Temperature Components of Power Plant)

  • 김효진;정용근;박종진
    • 대한기계학회논문집A
    • /
    • 제24권10호
    • /
    • pp.2597-2602
    • /
    • 2000
  • The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

잣 수확의 기계화 연구(II) -잣나무 가지의 전단 특성- (Mechanization of Pine Cone Harvest(II) -Shearing Characteristics of Shoots of Korean Pine Trees-)

  • 강화석;김상헌;이재선
    • Journal of Biosystems Engineering
    • /
    • 제19권1호
    • /
    • pp.17-21
    • /
    • 1994
  • This reasearch was performed to provide the fundamental intonation for the mechanization of Korean pine cone harvest when the shoot shearing method is adopted. Shear force and stress of pine cone shoots were measured and analyzed for this purpose. Samples are selected along their harvesting time and tested in 17 levels of shoot diameter from 10 to 26mm with 1mm increment. 1) Shear force-deformation characteristics showed that shoot reached its rupture point after 2 to 4 of bio-yield points. It was supposed that these multiple bio-yield points were caused by the discrete compression of wood parts which are composed of water, nutrient, resin, etc. 2) Required shear force to shear shoot was proportional to the square of shoot diamter, however, shear force for shoots of early harvesting time(Aug. 31) was proportional to the shoot diameter. Variance of shear force was increased as the harvesting time was delayed. Shear forces were distributed from 468N(Aug. 31, 12mm dia) to 4153N(Aug. 31, 26mm dia) disregarding the sampling date. 3) The average shear stresses by sampling dates were 744,822, and 883N/m2, respectively, and for the earlier shoot samples shear stress was quite smaller than the others. Shear stress was proportional to shoot diameter squared, and the effect of shoot diameter on the shear stress was decreased as harvesting time was delayed.

  • PDF

Development of an uncertainty quantification approach with reduced computational cost for seismic fragility assessment of cable-stayed bridges

  • Akhoondzade-Noghabi, Vahid;Bargi, Khosrow
    • Earthquakes and Structures
    • /
    • 제23권4호
    • /
    • pp.385-401
    • /
    • 2022
  • Uncertainty quantification is the most important challenge in seismic fragility assessment of structures. The precision increment of the quantification method leads to reliable results but at the same time increases the computational costs and the latter will be so undesirable in cases such as reliability-based design optimization which includes numerous probabilistic seismic analyses. Accordingly, the authors' effort has been put on the development and validation of an approach that has reduced computational cost in seismic fragility assessment. In this regard, it is necessary to apply the appropriate methods for consideration of two categories of uncertainties consisting of uncertainties related to the ground motions and structural characteristics, separately. Also, cable-stayed bridges have been specifically selected because as a result of their complexity and the according time-consuming seismic analyses, reducing the computations corresponding to their fragility analyses is worthy of studying. To achieve this, the fragility assessment of three case studies is performed based on existing and proposed approaches, and a comparative study on the efficiency in the estimation of seismic responses. For this purpose, statistical validation is conducted on the seismic demand and fragility resulting from the mentioned approaches, and through a comprehensive interpretation, sufficient arguments for the acceptable errors of the proposed approach are presented. Finally, this study concludes that the combination of the Capacity Spectrum Method (CSM) and Uniform Design Sampling (UDS) in advanced proposed forms can provide adequate accuracy in seismic fragility estimation at a significantly reduced computational cost.

CNC공작기계에 NURBS 보간 알고리즘 적용을 위한 시뮬레이션 분석 (Simulation Study for the Application of NURBS Interpolator)

  • 김태훈;고태조;김희술
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.979-982
    • /
    • 2001
  • In CNC machining, demands on precision machining of free formed surface model are increasing. Most of the CAD/CAM systems provide the NURBS(Non-Uniform Rational B-Spline) interpolator. NURBS is defined with NURBS parameter by control point, weight value and knot value. This paper shows the realtime NURBS interpolation algorithms and compared with each other. One is based on the equal length of curve segments rather than equal increment of the parameter Δu. The other is to limit the interpolation error to any desired level by adjusting the feedrate considering the curvature of the shape and sampling time.

  • PDF

Application of Generic Algorithm to Inspection Planning of Fatigue Deteriorating Structure

  • Kim, Sung-chan;Fujimoto, Yukio;Hamada, Kunihiro
    • Journal of Ship and Ocean Technology
    • /
    • 제2권1호
    • /
    • pp.42-57
    • /
    • 1998
  • Genetic Algorithm (GA) is applied to obtain optimal Inspection plan for fatigue deteriorating structures. The optimization problem is defined so as to minimize inspection cost in the 1ifs-time of the structure under the constraint that the increment of failure probability in each inspection interval is maintained below a target value. Optimization parameters are the inspection timing and the inspection quality. The inspection timing is selected from the discrete intervals such as one year, two years, three years, etc. The inspection quality is selected from the followings; no inspection, normal inspection, sampling inspection or precise inspection. The applicability of the proposed GA approach is demonstrated through the numerical calculations assuming a structure consisting of four member sets. Influences of the level of target failure probability, initial defect condition and stress increase due to plate thickness reduction caused by corrosion on inspection planning are discussed.

  • PDF

H.264/AVC 화면 내 예측을 위한 서브 샘플링 된 화소 기반 고속 모드 선택 기법 (Sub-Sampled Pixels based Fast Mode Selection Algorithm for Intra Prediction in H.264/AVC)

  • 김영준;김원균;정동진;정제창
    • 방송공학회논문지
    • /
    • 제17권3호
    • /
    • pp.471-479
    • /
    • 2012
  • 화면 내 예측 (intra prediction)은 H.264/AVC 참조 소프트웨어의 중요한 기술들 중의 하나 이지만, 커다란 부호화 복잡도를 가지고 있다. 이 문제를 해결하기 위하여 많은 고속 알고리즘이 제안되어 왔다. 본 논문에서는 H.264/AVC 부호화기의 높은 복잡도를 줄이기 위하여 서브 샘플링 (sub-sampling)된 화소들을 이용해 현재 블록의 에지 방향을 예측하는 고속 화면 내 예측 모드 선택 알고리듬을 제안한다. 제안한 알고리듬은 이전 알고리즘에 비해 H.264/AVC 부호화기의 복잡도를 줄일 뿐 아니라 부호화 성능을 향상 시키는 것을 보여준다. 실험결과는 제안한 알고리듬이 미미한 화질 열화와 비트 증가율을 가지면서 평균적으로 75.93% 만큼 부호화 시간을 줄이는 것을 보여준다.

Effect of trailing-edge modification over aerodynamic characteristics of NACA 0020 airfoil

  • Ethiraj, Livya;Pillai, Subramania Nadaraja
    • Wind and Structures
    • /
    • 제33권6호
    • /
    • pp.463-470
    • /
    • 2021
  • This study investigates the aerodynamic characteristics of NACA series airfoil by altering the trailing edge in the form of extended and serrated sections. This contemporary advent examined NACA 0020 airfoil experimentally at the angle of attack ranging from 0° to 45° and for the Reynolds number of 2.46 × 105. To figure out the flow behaviour, the standard average pressure distribution over the airfoil surface is estimated with 50 pressure taps. The time series surface pressure is recorded for 700 Hz of sampling frequency. The extended trailing edge of 0.1 c, 0.2 c and 0.3 c are attached to the base airfoil. Further, the triangular serration is introduced with the base length of 2 cm, 4 cm and 6 cm. Each base length with three different amplitudes of 0.1 c, 0.2 c and 0.3 c were designed and equipped with the baseline case at the trailing edge and tested. The aerodynamic force coefficient, as well as pressure coefficient are presented. The obtained data advises that modification in the trailing edge will reflect the aerodynamic characteristics and the flow behaviour over the section of a wing. Resultantly, the extended trailing edge as a thin elongated surface attached to a base airfoil without revising the main airfoil favors good lift increment. The serrated trailing edge acts as a flow control device by altering the flow pattern results to delay the stall phenomenon. Besides it, improves lift co-efficient with less amount of additional drag. This extended and serrated trailing edge approach can support for designing the future smart airfoil.

저온기 부영양 수계의 규조 발생에 대한 말조개의 섭식특성 (Grazing Effects of Freshwater Bivalve Unio douglasiae on the Hibernal Diatom Bloom in the Eutrophic Lake and Stream)

  • 이송회;황순진;김백호
    • 생태와환경
    • /
    • 제41권2호
    • /
    • pp.237-246
    • /
    • 2008
  • 서로 다른 물리-화학적 성격이 다른 저온기 두 부영양수계에서 우점하는 규조류 중심의 현장수에 대한 한국산 말조개(Unio douglasiae)의 섭식특성-여과능 및 배설물 생산을 각각 비교 조사하였다. 두 실험수 모두 패류밀도가 증가할수록 뚜렷한 엽록소 $\alpha$ 감소를 보였으며, 한강시료는 1시간 이후부터, 일감호 시료는 패류 처리와 함께 즉시 감소였다. 한강시료는 고밀도 처리에서 감소율이 높았으며 (약 90%), 일감호시료는 패류밀도 간에 다소 차이는 보였으나 고밀도군에서도 50% 정도 감소하였다. 조류 현존량의 변화경향는 엽록소와 유사하였으며, 시료와 조류종에 따라 차이를 보였다. 패류의 조류여과능은 패류적용 1시간째 시료 간에는 큰 차이를 보였으나 시간이 경과할수록 유사한 수준에 도달하였다. 배설물 생산은 한강시료에서는 밀도간에 차이가 적었으며 일감호의 높은 전도도와 탁도, 낮은 DO 포화도에서는 밀도 간에 100배 이상의 큰 차이를 나타냈다. 특히 일감호에서 고밀도 패류 적용시, 낮은 엽록소(조류)감소 및 높은 배설물 생산 등은 소화가 어려운 고형물의 축적효과가 높아 저온기 동안 탁도가 높은 하천 및 호수의 수질개선에 매우 효과적일 것으로 사료되었다.