• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.

• The Korean Journal of Cytopathology
• /
• v.19 no.2
• /
• pp.111-118
• /
• 2008

Background : Cervicovaginal cytology is a screening test of uterine cervical cancer. The sensitivity of cervicovaginal cytology is less than 50%, but studies of cytologic/histologic correlation are limited. We analyzed the diagnostic accuracy of cervicovaginal cytology in the detection of the squamous epithelial lesions of the uterine cervix and investigate the cause of diagnostic discordance. Materials and Methods : We collected a total of 481 sets of cervicovaginal cytology and biopsies over 5 years. The cytologic diagnoses were categorized based on The Bethesda System and the histologic diagnoses were classified as negative, flat condyloma, cervical intraepithelial neoplasia (CIN) I, CIN II, CIN III, or squamous cell carcinoma. Cytohistologic discrepancies were reviewed. Results: The concordance rate between the cytological and the histological diagnosis was 79.0%. The sensitivity and specificity of cervicovaginal cytology were 80.6% and 92.6%, respectively. Its positive predictive value and negative predictive value were 93.7% and 77.7%, respectively. The false negative rate was 19.4%. Among 54 false negative cytology cases, they were confirmed by histology as 50 flat condylomas, 2 CIN I, 1 CIN III, and 1 squamous cell carcinoma. The causes of false negative cytology were sampling errors in 75.6% and interpretation errors in 24.4%. The false positive rate was 7.4%. Among 15 false positive cytology cases, they were confirmed by histology as 12 atypical squamous cells of undetermined significance (ASCUS) and 3 low grade squamous intraepithelial lesions (LSIL). The cause of error was interpretation error in all cases. The overall diagnostic accuracy of cervicovaginal cytology was 85.7%. Conclusions : Cervicovaginal cytology shows high overall diagnostic accuracy and is a useful primary screen of uterine cervical cancer.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.125-131
• /
• 2014

The purpose of this study is to verify the utility of reflected photoplethysmography sensor using two green light emitting diodes that influenced by ambient light. Recently it has been studied that green light emitting diode is suitable for light source of reflected photoplethysmography sensor at low temperature and high temperature. Another study showed that, green light is better for monitoring heart rate during motion than led light. However, it has a bad characteristic about ambient light noise. To verify the utility of reflected photoplethysmography sensor using green light emitting diode, this study measures the photoplethysmography signal that is distorted by ambient light and will propose a solution. This study has two parts of research method. One is measurement system that composed sensor and board. The sensor is made up PE-foam and Non-woven fabric for flexible sensor. The photoplethysmography signal is measured by measurement board that composed high-pass filter, low-pass filter and amplifier. Ambient light source is light bulb and white light emitting diode that has three steps brightness. Photoplethysmography signal is measured with lead II electrocardiography signal at the same time and it is measured at the finger and radial artery for 1 minute, 1000 Hz sampling rate. The lead II electrocardiography signal is a standard signal for heart rate and photoplethysmography signal that measured at the finger is a standard signal for waveform. The test is repeated 3 times using three sensor. The data is processed by MATLAB to verify the utility by comparing the correlation coefficient score and heart rate. The photoplethysmography sensor using two green light emitting diodes is shown better utility than using one green light emitting diode and red light emitting diode at the ambient light. The waveform and heart rate that measured by two green light emitting diodes are more identical than others. The amount of electricity used is less than red light emitting diode and error peak detectability factor is the lowest.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.229-236
• /
• 2009

KOorea Multi-purpose SATellite(KOMPSAT)-5 will be launched at 550km altitude in 2010. Accurate satellite position(20 cm) and velocity(0.03 cm/s) are required to treat highly precise Synthetic Aperture Radar(SAR) image processing. Ionosphere delay was eliminated using dual frequency GPS data and double differenced GPS measurement removed common clock errors of both GPS satellites and receiver. SAC-C carrier phase data with 0.1 Hz sampling rate was used to achieve precise orbit determination(POD) with ETRI GNSS Precise Orbit Determination(EGPOD) software, which was developed by ETRI. Dynamic model approach was used and satellite's position, velocity, and the coefficients of solar radiation pressure and drag were adjusted once per arc using Batch Least Square Estimator(BLSE) filter. Empirical accelerations for sinusoidal radial, along-track, and cross track terms were also estimated once per revolution for unmodeled dynamics. Additionally piece-wise constant acceleration for cross-track direction was estimated once per arc. The performance of POD was validated by comparing with JPL's Precise Orbit Ephemeris(POE).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.703-709
• /
• 2017

Korea Utility Helicopter(KUH) is a project to replace the aging helicopter presently being operated by the military with a domestic helicopter. The auxiliary power unit is a device that supplies emergency power to the system by an alternator installed when the main generator fails and the start motor converts the electrical energy of the battery into mechanical rotational energy to rotate the auxiliary power unit engine. With continuing power and operation, defects of the starting motor were found and improvements were carried out to solve it. In the failure mode analysis, the causes of possible defects were classified into 5 categories. Analysis of the 5 factors revealed that the main cause of defects is mechanical wear, which was found to be related to spring pressure. 250 tests were conducted through the theoretically determined pressure and regression analysis was performed with 4 sampling.The results showed that pressure was related to wear rate. In conclusion, early wear and breakage due to wear can be controlled through spring force and test showed the prediction of wear and the validity of the result were confirmed.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.59-64
• /
• 2005

In case of lipsticks, observer's subjective sensitivity has been the main index to estimate gloss and gloss-lasting capability. The glossmeter has been applied to measure the gloss of make-up cosmetics like nail enamel, however is not effective for lipstick because of uneven sampling. Also gloss-lasting capability couldn't have been measured. In this study, we optimized measurement methods of gloss and gloss-lasting capability of lipsticks, which are highly correlated to subjective sensory tests. We set up the standard methods of gloss measurement by changing application conditions, for example, materials, sizes and application number of times and so on. And we introduced optimizing measurement system, in which shaking speed and temperature were controlled to measure gloss-lasting capability. Applying our methods, the gloss values were very close to the results of sensory tests, and we could express the gloss and gloss-lasting capability of lipsticks numerically Repeatability and reproducibility of our methods were certified by six-sigma statistical tool.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.2
• /
• pp.119-130
• /
• 2021

Purpose : We aimed to validate a new manual therapy to treat tension type headache(TTH) by applying myofascial release techniques to the scalp and to examine the changes in the quality of life and the headache characteristics after treatment and at the 6-month follow-up. Methods : Thirty patients were recruited in this study and were assigned to two groups through simple random sampling. Fifteen patients were assigned to the manual therapy group (MT) and 15 patients to the scalp myofascial release technique (SMT) group. However, five patients from the MT group and one from the SMT group were excluded. Therefore, 24 patients with TTH (10 males, 14 females) participated in the study. Patients underwent either MT or SMT. The procedures were performed by a physical therapist twice per week for 4 weeks. The quality of life [using the brief pain inventory (BPI) and the headache impact test (HIT)], and the frequency, duration, and intensity of the headache [on a visual analog scale (VAS)] were assessed before and after the treatment, and at the follow-up. Results : After 4 weeks of SMT, the frequency (p<.001), duration (p<.05), and intensity (p<.001) of the headache and the quality of life (HIT; p <.001, BPI; p<.001) significantly improved in the patients with TTH. The improvement in these parameters remained significant even after 6 months of follow-up. Similarly, After 4 weeks of MT, the frequency (p<.05), duration (p<.05), and intensity (p<.01) of the headache, and the quality of life (HIT; p<.05, BPI; p<.001) significantly improved in the patients with TTH. The improvement in these parameters remained significant even after 6 months of follow-up. There was no significant difference in these parameters between the two groups. Conclusion : It has been suggested that MT using the SMT can be used as a non-invasive treatment to treat the frequency, duration, and intensity of the TTH, and to improve the quality of life.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.395-405
• /
• 2018

Seakeeping safety module in Korean e-Navigation system is one of the ship remote monitoring services that is employed to ensure the safety of ships by monitoring the ship's real time performance and providing a warning in advance when the abnormal conditions are encountered in seakeeping performance. In general, seakeeping performance has been evaluated by simulating ship motion analysis under specific conditions for its design. However, due to restriction of computation time, it is not realistic to perform simulations to evaluate seakeeping performance under real-time operation conditions. This study aims to introduce a reasonable and faster method to predict a ship's roll motion which is one of the factors used to evaluate a ship's seakeeping performance by using a machine learning-based surrogate model. Through the application of various learning techniques and sampling conditions on training data, it was observed that the difference of roll motion between a given surrogate model and motion analysis was within 1%. Therefore, it can be concluded that this method can be useful to evaluate the seakeeping performance of a ship in real-time operation.

• 한국노년학
• /
• v.37 no.1
• /
• pp.125-149
• /
• 2017

The purpose of this study is to analyse the mediating effects of spirituality on the relationship between functional capacity and depression among the elderly. The conceptual framework was based on the integrated theory by Brief et al.(1993) to life satisfaction. The sample was collected through convenience sampling of 413 elderly persons who were 65 years of age or older drawn from senior welfare centers, community senior centers, and religious institutions in Seoul, Incheon, and Gyeonggi Province. Data analysis was performed using Structural Equation Modeling(SEM). The main findings of the present study are as following: First, spirituality had the mediated effects on which depression and IADL influenced life satisfaction. Particularly, existential spirituality on life satisfaction had larger effect size than religious spirituality. Second, the results showed that religious spirituality had positive effects on existential spirituality. These findings demonstrate that the development and implementation of programs geared for fostering religious spirituality and existential spirituality of senior citizens are needed to improve life satisfaction in the field of social welfare. To this end, the foundation of spiritual practice in the field of social work with older people should be constructed through a spirituality-related system and professional training.