• Journal of Korean Society for Quality Management
• /
• v.38 no.2
• /
• pp.190-201
• /
• 2010

This research proposes a method for designing VSI (Variable Sampling Interval) control charts with supplementary run rules. The basic idea is to apply various run rules and the VSI scheme to a control chart in order to increase the sensitivity. The sampling process of the VSI run rules chart is constructed by Markov chain approach. A procedure for designing the VSI run rules chart is proposed based on Lorenzen and Vance's model. Sensitivity study shows that the VSI run rules charts outperform the FSI (Fixed Sampling Interval) run rules charts for wide range of process mean shifts. A major advantage of the VSI run rules chart over other charts such as CUSUM, EWMA, and adaptive charts is it's simplicity in implementation. Some useful guidelines are proposed based on the sensitivity study.

• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.121-130
• /
• 2019

Alumina is one of the most important ceramic materials because of its useful physical and chemical properties. Recently, high-purity alumina has been used in various industrial fields. This leads to increasing demand for reliable elemental analysis of impurities in alumina samples. However, the chemical inertness of alumina makes the sample preparation for conventional elemental analysis a tremendously difficult task. Herein, we demonstrated the feasibility of laser ablation for effective sampling of alumina powder. Laser ablation performs sampling rapidly without any chemical reagents and also allows simultaneous optical emission spectroscopy and mass spectrometry analyses. For six alumina samples including certified reference materials and commercial products, laser-induced breakdown spectroscopy (LIBS) and laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) analyses were performed simultaneously based on a common laser ablation sampling. LIBS was found to be useful to quantify alkali and alkaline earth metals with limits-of-detection (LODs) around 1 ppm. LA-ICP-MS could quantify transition metals such as Ti, Cu, Zn, and Zr with LODs in the range from a few tens to hundreds ppb.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.2
• /
• pp.23-26
• /
• 2022

A lossless transport of an arbitrary waveform in a frequency range of 10⁶-10⁹ Hz through a conduction channel in a cryogenic temperature is of importance for a high-speed operation of quantum device. However, it is hard to use a commercial oscilloscope to directly detect the waveform travelling in a device located in a cryogenic system. Here, we developed a cryogenic voltage sampling technique by using a Schottky barrier gate prepared on a surface of a GaAs/AlGaAs device, which revealed that an incident rectangle waveform can transport through a 1 mm long two-dimensional conduction channel without waveform deformation up to 20 MHz, while further study is needed to increase the detection frequency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.293-297
• /
• 1981

An attempt has been made to determine the optimum size of sampling unit and the number of samples for a given precision in wheat, using the data collected from the various experiments in 1979/80. It was found that the coefficients of variation for number of spikes except the case of high-ridge broadcasting by 8HP rotarized seeder are in the same order of those for yield of wheat, and the regression coefficients associated with the coefficients of variation and the size of sampling unit were significant at 1% level of type I error. A wide range of variation in the size of sampling unit was observed for different methods of seeding, indicating the proper sizes of sampling units for 40cm \times 18cm, 60cm \times 18cm, 20cm \times 5cm, 120cm \times 90cm to be 0.40$m^2$, 0.17$m^2$, , 0.11$m^2$, , 0.55$m^2$, , respectively. The variance component for the experimental error was not physically possible to estimate due probably to high variability among the sampling units. The number of the sampling units per plot for a given precision of CV=12% was estimated to be one in an experiment with 4 replicates.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.189-193
• /
• 2015

This paper provides the design techniques of a successive approximation register (SAR) type 12b analog-to-digital converter (ADC) for distributed maximum power point tracking (DMPPT) control in a photovoltaic system. Both a top-plate sampling technique and a $V_{CM}$-based switching technique are applied to the 12b capacitor digital-to-analog converter (CDAC). With these techniques, we can implement a 12b SAR ADC with a 10b capacitor array digital-to-analog converter (DAC). To enhance the accuracy of the ADC, a single-to-differential converted DAC is exploited with the dual sampling technique during top-plate sampling. Simulation results show that the proposed ADC can achieve a signal-to-noise plus distortion ratio (SNDR) of 70.8dB, a spurious free dynamic range (SFDR) of 83.3dB and an effective number of bits (ENOB) of 11.5b with bipolar CMOS LDMOD (BCDMOS) $0.35{\mu}m$ technology. Total power consumption is 115uW under a supply voltage of 3.3V at a sampling frequency of 1.25MHz. And the figure of merit (FoM) is 32.68fJ/conversion-step.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.98-104
• /
• 2013

This paper presents a WBAN UWB receiver circuit for RTLS(real time location system) and wireless data communication. The UWB receiver is designed to OOK modulation for energy detection. The UWB receiver is designed for sub-sampling techniques using 4bit ADC and DLL.The proposed UWB receiver is designed in $0.18{\mu}m$ CMOS and consumes 61mA with a 1.8V supply voltage. The UWB receiver achieves a sensitivity of -85.7 dBm, a RF front-end gain of 42.1 dB, a noise figure of 3.88 dB and maximum sensing range of 4 meter.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.596-602
• /
• 2012

Infestations of Aphis gossypii per leaf in greenhouse cultivation of cucumbers were investigated to develop binomial sampling plans. An empirical $P_T-m$ model, $ln(m)={\alpha}+{\beta}ln[-ln(1-P_T)]$, was used to evaluate relationship between the proportion of infested leaves with ${\leq}$ T aphids per leaf ($P_T$) and mean aphid density (m). Tally thresholds (T) were set to 1, 3, 5, 7, and 9 aphids per leaf to find appropriate T in greenhouse cultivation of cucumbers. Increasing sample size had little effect on the precision of the binomial sampling plan. However, the precision increased with tally threshold. The binomial model with T = 5 provided appropriate predictions of the mean densities of A. gossypii in the greenhouse cultivation of cucumbers. Using a binomial model with T = 5 (sample size = 200), a wide range of densities (1.2 - 222.8 aphids per leaf) could be estimated with precision levels of 0.346 - 0.380 for $P_T$ values between 0.15 and 0.96. Binomial models were validated at T = 5 and 7 using 12 independent data sets. Both binomial models were robust and adequately described aphid densities; most of the independent sampling data fell within 95% confidence intervals around the prediction model.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.409-420
• /
• 2021

We propose a method to synthesize a color non-hogel-based computer-generated-hologram (CGH) from light field data of a three-dimensional scene with a hologram pixel pitch shared for all color channels. The non-hogel-based CGH technique generates a continuous wavefront with arbitrary carrier wave from given light field data by interpreting the ray angle in the light field to the spatial frequency of the plane wavefront. The relation between ray angle and spatial frequency is, however, dependent on the wavelength, which leads to different spatial frequency sampling grid in the light field data, resulting in color aberrations in the hologram reconstruction. The proposed method sets a hologram pixel pitch common to all color channels such that the smallest blue diffraction angle covers the field of view of the light field. Then a spatial frequency sampling grid common to all color channels is established by interpolating the light field with the spatial frequency range of the blue wavelength and the sampling interval of the red wavelength. The common hologram pixel pitch and light field spatial frequency sampling grid ensure the synthesis of a color hologram without any color aberrations in the hologram reconstructions, or any loss of information contained in the light field. The proposed method is successfully verified using color light field data of various test or natural 3D scenes.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.245-258
• /
• 2022

Many Structural Health Monitoring (SHM) methods have been proposed for structural damage diagnosis and prognosis. However, SHM for pinched hysteretic structures can be problematic due to the high level of nonlinearity. The model-free hysteresis loop analysis (HLA) has displayed notable robustness and accuracy in identifying damage for full-scaled and scaled test buildings. In this paper, the performance of HLA is compared with seven other SHM methods in identifying lateral elastic stiffness for a six-story numerical building with highly nonlinear pinching behavior. Two successive earthquakes are employed to compare the accuracy and consistency of methods within and between events. Robustness is assessed across sampling rates 50-1000 Hz in noise-free condition and then assessed with 10% root mean square (RMS) noise added to responses at 250 Hz sampling rate. Results confirm HLA is the most robust method to sampling rate and noise. HLA preserves high accuracy even when the sampling rate drops to 50 Hz, where the performance of other methods deteriorates considerably. In noisy conditions, the maximum absolute estimation error is less than 4% for HLA. The overall results show HLA has high robustness and accuracy for an extremely nonlinear, but realistic case compared to a range of leading and recent model-based and model-free methods.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.191-195
• /
• 1996

This paper deals with the tapped time delay circuit with SCF(Switched Capacitor Filters). This filter is composed of lossless discrete integrator and the SCF has 2-phase clocks. Experimental results have shown that telephone signals (0~4kHz) could be delayed in the range of sampling frequency 80kHz. But above the range, operational amplifiers and analog switchs have been difficult in the normal operating condition.