• 기술혁신학회지
• /
• 제14권3호
• /
• pp.599-621
• /
• 2011

본 연구는 부산 울산 경남의 동남권 지역에 집중되어 위치한 조선 산업에서 산업클러스터의 존재여부를 도출하고 그 위상을 파악하여 앞으로의 정책추진에 있어 주요한 기준을 제시하고자 했다. 이에 본 연구는 입지계수(LQ: location quotient)를 활용한 특화도 분석을 통하여 부산 울산 경남의 동남권지역의 산업클러스터 여부를 실증적으로 확인했다. 이는 산업클러스터의 구체적인 발전전략을 세우기에 앞서 먼저 산업클러스터를 확인하는 작업이 필요하기 때문이다. 분석결과 이 동남권의 입지계수의 값은 1.25보다 작은 결과가 도출되어 이 지역의 조선산업은 아직 특화되지 못했음이 밝혀졌고, 부산 울산 경남지역 각각의 경우도 이러한 과정을 통해 이 지역의 조선 산업이 아직 특화되지 못했음이 분석되었다. 한편 이러한 분석을 통해 앞으로 세 지역 중 어떤 곳과 조선관련 산업 중 어떤 업종이 각각 전국 대비 가장 특화될 가능성이 높은지도 밝혀졌다.

• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.703-712
• /
• 2017

철도는 인터페이스 산업으로 철도차량 선로 관제 등이 유기적으로 맞물려야 움직일 수 있다. 이를 정상적으로 운영하기 위해서는 많은 유지보수 활동이 필요한데 이러한 활동과정에서 발생하는 데이터들은 각 분야별로 관리하고 있어 업무특성에 따라 위치, 시간 등 기준 데이터가 각각 상이하여 시 공간 기반의 통합 분석을 할 수 없는 실정이다. 각 분야별로 상이한 데이터를 통합 분석하기 위해서는 데이터마이닝 기법을 통해 유의미한 정보를 추출하여 분석하는데, 이러한 분석을 위해서는 데이터 유형의 상호관련성을 인지하기 위한 기준정보의 추출과 매핑이 반드시 필요하다. 본 연구는 서로 다른 분야에서 발생하는 안전과 관련된 데이터에 대한 매핑 툴 선정과 결과에 대하여 검증을 수행하고자 한다.

• 한국융합학회논문지
• /
• 제8권6호
• /
• pp.37-44
• /
• 2017

모바일 단말기는 터치 스크린 상의 가상 키패드로 비밀번호와 같은 중요 정보를 입력하여 결제 및 인증을 통해 다양한 서비스를 제공한다. 사용자가 모바일 단말기로 입력한 비밀번호를 유추하기 위해 공격자는 사용자의 터치 위치정보를 탈취한다. 구글 글래스를 이용한 훔쳐보기나 어깨너머 공격으로부터 터치된 비밀번호 정보를 알아내거나 탈취된 위치정보를 이용하여 터치한 비밀번호를 유추할 수 있다. 이는 기존 보안 키패드는 손쉬운 입력을 위해 일부 키를 제외하고 거의 정해진 순서대로 같은 크기의 키패드로 같은 문자를 배치하기 때문에 구글 글래스나 어깨너머 공격 등에 취약하다. 보안 키패드를 다양한 모양과 위치를 재배치하므로 보안성을 높일 수 있다. 본 논문은 13가지의 테트리스의 다양한 형태와 크기를 생성하고, 키패드를 이어 붙여서 배치하는 보안 키패드를 제안한다. 보안 키패드는 다양한 모양과 크기를 테트리스 게임처럼 배열하므로 가상 키패드를 다양하게 만들어 공격자가 터치한 위치정보가 알더라도 키패드의 크기를 달라 입력된 비밀정보를 유추하기가 어렵다.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.471-476
• /
• 2013

The present study has been carried out to elucidate the optimal method for the performance test of a refrigerator vacuum insulation panel (VIP), by using numerical heat transfer analysis. Three locations of heat flux meter have been tested, for deriving the best test method to clarify the normal or the abnormal condition of the vacuum insulation panel in a refrigerator. The first location of the heat flux sensor is at the same place as the heater, the second one is at the nearby side location of the heater and the third one is at the opposite side location of heater in the refrigerator. The heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$ were calculated for the cases with the normal VIP, and with the abnormal VIP, and their differences analyzed. From the present study, the first and the second method had a mere difference characteristics of heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$, between the cases with the normal or the abnormal VIP. The magnitude of the heat flux after 300sec had a great difference between the cases with the normal or abnormal VIP for the third method, and it could be considered the most optimal method to test the performance of a refrigerator vacuum insulation panel.

• 한국안전학회지
• /
• 제33권6호
• /
• pp.144-156
• /
• 2018

Level 3 Probabilistic Safety Assessment (PSA) is performed for the risk assessment that calculates radioactive material dispersion to the environment. This risk assessment is performed with a tool of MELCOR Accident Consequence Code System (MACCS2 or WinMACCS). For the off-site consequence analysis of multi-unit nuclear power plant (NPP) accident, the single location (Center Of Mass, COM) method has been usually adopted with the assumption that all the NPPs in the nuclear site are located at the same COM point. It was well known that this COM calculation can lead to underestimated or overestimated radionuclide concentration. In order to overcome this underestimation or overestimation of radionuclide concentrations in the COM method, Multiple Location (ML) method was developed in this study. The radionuclide concentrations for the individual NPPs are separately calculated, and they are summed at every location in the nuclear site by the post-processing of radionuclide concentrations that is based on two-dimensional Gaussian Plume equations. In order to demonstrate the efficiency of the ML method, radionuclide concentrations were calculated for the six-unit NPP site, radionuclide concentrations of the ML method were compared with those by COM method. This comparison was performed for conditions of constant weather, yearly weather in Korea, and four seasons, and the results were discussed. This new ML method (1) improves accuracy of radionuclide concentrations when multi-unit NPP accident occurs, (2) calculates realistic atmospheric dispersion of radionuclides under various weather conditions, and finally (3) supports off-site emergency plan optimization. It is recommended that this new method be applied to the risk assessment of multi-unit NPP accident. This new method drastically improves the accuracy of radionuclide concentrations at the locations adjacent to or very close to NPPs. This ML method has a great strength over the COM method when people live near nuclear site, since it provides accurate radionuclide concentrations or radiation doses.

• 한국정보통신학회논문지
• /
• 제24권3호
• /
• pp.448-458
• /
• 2020

공통현을 이용한 삼변측량 기반 실내 측위의 경우 각 AP로부터 이동체까지의 거리를 구하여, 각 AP별로 해당 거리를 반지름으로 하는 원을 이용하여 원들의 둘레가 교차 되는 접점들을 이용하여 이동체의 위치를 예상한다. 거리 오차로 인하여 원 간의 접점이 생성되지 않는 경우, 위치 예상에 실패하게 된다. 본 논문에서는 이를 개선하기 위한 알고리즘을 제안하였는데, 거리에 따라 반지름의 크기에 비례한 값을 임의로 추가하여 강제로 접점을 생성하여 예상 위치를 생성한 뒤, 해당 원의 반지름에 추가된 임의 값과 원점으로부터, 거리에 따른 보정을 하였다. 기존 삼변측량의 거리 오차로 인한 좌표 생성 실패 비율과 좌표 측위 오차를 최소화하는 발전된 알고리즘을 제안하고 시스템을 제작하여 성능을 분석하였다.

• Journal of Gastric Cancer
• /
• 제22권3호
• /
• pp.235-247
• /
• 2022

Purpose: Most studies have investigated the differences in postgastrectomy quality of life (QOL) based on the surgical procedure or reconstruction method adopted; only a few studies have compared QOL based on tumor location. This large-scale study aims to investigate the differences in QOL between patients with esophagogastric junction cancer (EGJC) and those with upper third gastric cancer (UGC) undergoing the same gastrectomy procedure to evaluate the impact of tumor location on postoperative QOL. Methods: The Postgastrectomy Syndrome Assessment Scale-45 (PGSAS-45) questionnaire was distributed in 70 institutions to 2,364 patients who underwent gastrectomy for EGJC or UGC. A total of 1,909 patients were eligible for the study, and 1,744 patients who underwent total gastrectomy (TG) or proximal gastrectomy (PG) were selected for the final analysis. These patients were divided into EGJC and UGC groups; thereafter, the PGSAS-45 main outcome measures (MOMs) were compared between the two groups for each type of gastrectomy. Results: Among the post-TG patients, only one MOM was significantly better in the UGC group than in the EGJC group. Conversely, among the post-PG patients, postoperative QOL was significantly better in 6 out of 19 MOMs in the UGC group than in the EGJC group. Conclusions: Tumor location had a minimal effect on the postoperative QOL of post-TG patients, whereas among post-PG patients, there were definite differences in postoperative QOL between the two groups. It seems reasonable to conservatively estimate the benefits of PG in patients with EGJC compared to those in patients with UGC.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.328-335
• /
• 2022

With the advance of robot capabilities and functionalities, construction robots assisting construction workers have been increasingly deployed on construction sites to improve safety, efficiency and productivity. For close-proximity human-robot collaboration in construction sites, robots need to be aware of the context, especially construction worker's behavior, in real-time to avoid collision with workers. To recognize human behavior, most previous studies obtained 3D human poses using a single camera or an RGB-depth (RGB-D) camera. However, single-camera detection has limitations such as occlusions, detection failure, and sensor malfunction, and an RGB-D camera may suffer from interference from lighting conditions and surface material. To address these issues, this study proposes a novel method of 3D human pose estimation by extracting 2D location of each joint from multiple images captured at the same time from different viewpoints, fusing each joint's 2D locations, and estimating the 3D joint location. For higher accuracy, the probabilistic representation is used to extract the 2D location of the joints, considering each joint location extracted from images as a noisy partial observation. Then, this study estimates the 3D human pose by fusing the probabilistic 2D joint locations to maximize the likelihood. The proposed method was evaluated in both simulation and laboratory settings, and the results demonstrated the accuracy of estimation and the feasibility in practice. This study contributes to ensuring human safety in close-proximity human-robot collaboration by providing a novel method of 3D human pose estimation.

• 한국중재학회지:중재연구
• /
• 제33권2호
• /
• pp.3-21
• /
• 2023

Chinese law does not directly stipulate the criteria for determining the nationality of arbitral awards, and the Civil Procedure Law stipulates that arbitral awards are divided into domestic arbitral awards and foreign arbitral awards based on the location of the arbitration institution managing the arbitration cases. This indirectly classifies the nationality of the arbitral award based on the location of the arbitral institution. However, with regard to the nationality of eight arbitral awards in this paper made in China by the foreign arbitration institutions, the Chinese courts determined the nationality by arbitrarily selecting the criteria for the location of the arbitration institution and the criteria for the place of arbitration, except for arbitral awards made in Hong Kong. China's unclear attitude toward the criteria for determining the nationality of arbitral award has resulted not only obscures the country that can exercise the right to revoke arbitral award, but also obscures the laws and regulations applied to the approval and execution of arbitral awards. In other words, since the right to revoke the arbitral awards resides with the country of nationality of the awards, such an ambiguous attitude in China prevents the parties from responding to the cancellation lawsuit by predicting the nationality of the arbitral awards in advance. Furthermore, since China made a declaration of reciprocity reservations while joining the New York Convention, in cases where the criteria for location of the arbitral institution is applied, if the arbitration institution belongs to a contracting state, the it must apply the New York Convention to approve and execute arbitration decisions, but if it is not a contracting state, it must be approved and executed by mutual arbitration agreements or reciprocity principles. These results can lead to different results in approval and execution of the same arbitral awards depending on how the nationality is determined.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.403-411
• /
• 2013

Horizontal construction projects such as oil and gas pipeline projects typically involve repetitive-work activities with the same crew and equipment from one end of the project to the other. Repetitive scheduling also known as linear scheduling is known to have superior schedule management capabilities specifically for such horizontal construction projects. This study discusses on expanding the capabilities of repetitive scheduling to account for the variance in production rates and visual representation by developing an automated alignment based linear scheduling program for applying temporal and spatial changes in production rates. The study outlines a framework to apply changes in productions rates when and where they will occur along the horizontal alignment of the project and illustrates the complexity of construction through the time-location chart through a new linear scheduling model, Linear Scheduling Model with Varying Production Rates (LSM_VPR). The program uses empirically derived production rate equations with appropriate variables as an input at the appropriate time and location based on actual 750 mile natural gas liquids pipeline project starting in Wyoming and terminating in the center of Kansas. The study showed that the changes in production rates due to time and location resulted in a close approximation of the actual progress of work as compared to the planned progress and can be modeled for use in predicting future linear construction projects. LSM_VPR allows the scheduler to develop schedule durations based on minimal project information. The model also allows the scheduler to analyze the impact of various routes or start dates for construction and the corresponding impact on the schedule. In addition, the graphical format lets the construction team to visualize the obstacles in the project when and where they occur due to a new feature called the Activity Performance Index (API). This index is used to shade the linear scheduling chart by time and location with the variation in color indicating the variance in predicted production rate from the desired production rate.