• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.273-281
• /
• 1990

Two rice varieties, Samkangbyeo and Sangpungbyeo, were transplanted on 1/2000a pots at 6 different dates beginning on May 11 with 10 day interval in 1987 and at 4 different dates beginning on May 21 with 10 day interval in a paddy field at the Chungbuk Provincial Rural Development Administration. Dry matter distributions to stem and leaf sheath, leaves and ear at different growth stages were analyzed to provide basic informations neccessary for the development of dynamic growth model. Dry matter production was reduced as transplanting was delayed and the degree of reduction was greater at the transplanting later than June 1. Dry matter distribution to stem and leaf sheath was increased up to 60-70 days after transplanting with the maximum ratio between 60-70%, which were decreased to 37-43% in pots and 27-33% in field at the end of ripening stage. On the other hand, dry matter distribution to leaf blade was decreased from 40-50% at transplanting to 11-17% at harvesting. Ear dry matter distribution increased rapidly after heading and the distribution ratio was 42-49% in pots and 52-62% in field. Although regression equations to predict dry matter distribution to different parts of rice plant were satisfactory for individual experiment, the application to different experiment was not appropriate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.328-333
• /
• 1990

In developing dynamic growth model of a crop, it is important to estimate accurate dry matter partition to different parts of crop plants. Two rice varieties, Samkang and Chucheong, were transnplanted with three planting densities of 72. 90 and 120 hills per 3.3㎡ on May 30 and June 15 in 1988 to study the effect of planting density on dry matter partition in rice plants. Total dry wight per square meter of two varieteis in May 30 transplanting were greater than those in June 15 transplanting. Total dry wights were increased as planting density was increased. The response of dry weights of differents parts of rice plants per hill were decreased as the density was increased. Although the difference in dry weights of leaf blade and stem and sheath between two varieties was not great, greater ear weight of Samkang resulted in greater total dry weight than that of Chucheong. Despite of transplant in date and planting density on dry weights, the ratio of dry matter partition to different parts of rice plants at a certain growth stage remained constant. Estimated dry weights of different parts at two stages of growth based on average ratio of dry matter partition over two transplantion dates and planting densities agreed well with those observed.

• Clean Technology
• /
• v.15 no.1
• /
• pp.54-59
• /
• 2009

In this study, the separation of water/bitumen emulsion was investigated by chemical demulsification method. Motor oils (GS Caltex Deluxe Gold V 7.5W/30, Hyundai gear oil 85W/140) and asphalt (AP-5, KS M 2201, Dongnam Petrochemical MFG. Co.) were used as model oils in the preliminary experiments to effectively remove water from water/bitumen emulsion. The bitumen extracted from Canadian oilsands was used in this study. The water/oil emulsion was not separated without demulsifiers, and Hyundai motor oil showed higher efficiency of water separation at a low concentration of demulsifier compared with that for GS Caltex motor oil. However, as the concentration increased, the efficiency did not rapidly increase compared with that of GS Caltex motor oil. It was highly speculated that the water phase of Hyundai motor oil was not dispersed well compared with that of GS Caltex motor oil because the viscosity of Hyundai motor oil was much higher than that of GS Caltex motor oil. The demulsifier of higher HLB (hydrophilic - lipophilic balance) value had high separation efficiencies in water/oil emulsion. The TWEEN 20 (polyoxyethylene sorbitan monolaurate solution) showed better separation efficiency than other demulsifiers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.89-100
• /
• 2010

The performance evaluation of a conventional Wave Resonator at the entrance of harbors against solitary wave has been performed using 3D numerical wave flume. A wave resonator has been designed for the attenuation of the transmitted wave energy by trapping the short periodic incident waves only. In this study, however, the controlled performance of the wave resonator by its various widths has been numerically investigated for solitary waves. Source distribution method based on the Green function and the 3D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) using 3D numerical wave flume were used for the short-periodic waves and the solitary waves, respectively, and these models were verified through the comparisons with the previous experimental and numerical results by other researchers. It was confirmed that the wave resonator is effective enough to control the solitary waves as well as the periodic waves when it compares with the case of no resonance system. Further, it was found that there is the optimal width of a wave resonator to attenuate the target solitary waves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.2
• /
• pp.82-91
• /
• 2006

We investigated the possibility of using effluents from a municipal sewage treatment plant (STP) as tracers a tracer for hydrologic studies of rivers. The possibility was checked in a 12-km long reach downstream of Jeonju Municipal Sewage Treatment Plant (JSTP). Time-series monitoring of the water chemistry reveals that chemical compositions of the effluent from the JSTP are fluctuating within a relatively wide range during the sampling period. In addition, the signals from the plant were observed at the downstream stations consecutively with increasing time lags, especially in concentrations of the conservative chemical parameters (concentrations f3r chloride and sulfate, total concentration of major cations, and electric conductivity). Based on this observation, we could estimate the stream flow (Q), velocity (v), and dispersion coefficient (D). A 1-D nonreactive solute-transport model with automated optimization schemes was used for this study. The values of Q, v, and D estimated from this study varied from 6.4 to $9.0m^3/sec$ (at the downstream end of the reach), from 0.06 to 0.10 m/sec, and from 0.7 to $6.4m^2/sec$, respectively. The results show that the effluent from a large-scaled municipal STP frequently provides good, multiple natural tracers far hydrologic studies.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.81-91
• /
• 2024

Purpose: The objective of this study was to propose a deep-learning model for the detection of the mandibular canal on dental panoramic radiographs. Materials and Methods: A total of 2,100 panoramic radiographs (PANs) were collected from 3 different machines: RAYSCAN Alpha (n=700, PAN A), OP-100 (n=700, PAN B), and CS8100 (n=700, PAN C). Initially, an oral and maxillofacial radiologist coarsely annotated the mandibular canals. For deep learning analysis, convolutional neural networks (CNNs) utilizing U-Net architecture were employed for automated canal segmentation. Seven independent networks were trained using training sets representing all possible combinations of the 3 groups. These networks were then assessed using a hold-out test dataset. Results: Among the 7 networks evaluated, the network trained with all 3 available groups achieved an average precision of 90.6%, a recall of 87.4%, and a Dice similarity coefficient (DSC) of 88.9%. The 3 networks trained using each of the 3 possible 2-group combinations also demonstrated reliable performance for mandibular canal segmentation, as follows: 1) PAN A and B exhibited a mean DSC of 87.9%, 2) PAN A and C displayed a mean DSC of 87.8%, and 3) PAN B and C demonstrated a mean DSC of 88.4%. Conclusion: This multi-device study indicated that the examined CNN-based deep learning approach can achieve excellent canal segmentation performance, with a DSC exceeding 88%. Furthermore, the study highlighted the importance of considering the characteristics of panoramic radiographs when developing a robust deep-learning network, rather than depending solely on the size of the dataset.

• Journal of Acupuncture Research
• /
• v.24 no.6
• /
• pp.1-14
• /
• 2007

Backgrounds : Rheumatoid Arthritis(RA) is known as the chronic inflammatory diseasethat induces persistent inflammation in the joint cavity. The destruction of cartilage occurs as the result of bones destoyed by pannus, several influential cytokines induced by the synovial capsulitis, varieties of proteinases, $O_2$ radicals, and the secondary degenerative changes of articular cartilage. The type 2 collagen-induced arthritis model is used in recent experimental research on rheumatoid arthritis. Cervus elaphus sibiricus (Nockyong) has the effect of relieving pain by nourishing the muscles, joints, and bones. It is also known to be efficacious in promoting and enhancing the immune system. The objective of this study was to investigate the effect of Cervus elaphus sibiricus herbal acupuncture to inhibit the generation of proinflammatory enzyme on type 2 collagen-induced arthritis. I investigated the inhibition of mRNA transcription of MIF(macrophage migration inhibitory factor), $TNF-{\alpha}$(Tumor necrosis $factor-{\alpha}$) and MMP-9 (matrix metalloproteinase-9) of Cervus elaphus sibiricus herbal acupuncture using an in vitro test. Also investigated was the inhibition of differentiation of Th 1 cells and activation of cytokines(MIF, $TNF-{\alpha}$, IL-6, MMP-9), which are known to cause initial RA ,and are also related to the morphology of the synovial membranes of the joint capsule, by an in vivo test, using CIA(collagen induced arthritis) model mice. Materials & methods : The laboratory animals used in this experiment were 4 week-old DBA female mice, weighing approximately 20 grams, and adjusted to the laboratory environment. The experiment was divided into the normal group(NOR)-no treated group, control group(CON)-CIA induced group, and sample group(SAM)-Cervus elaphus sibiricus herbal acupuncture treated group. RA was induced in the mice via injection of $50{\mu}{\ell}$ C II mixed CFA. The Cervus elaphus sibiricus herbal acupuncture solution was applied on $GB_{35}$(陽陵泉) for 26 days from the 3rd day of RA inducement. The concentration of the solution was determined via a MTT assay. To research the effect on the expression of MIF, $TNF-{\alpha}$ and MMP-9 mRNA, RT-PCR was performed on synovial membrane cells from the knee joint of CIA mice. C II induced RA knee joint's histo-chemical synovial membrane was observed using a specimen model via the Hematoxilin and Eosin dying technique. Results : The expression of mRNA of RA-related cytokines such as MIF, $TNF-{\alpha}$, and MMP-9 dosedependently decreased in the cell from the synovial membranes of the joint, which is treated with Cervus elaphus sibiricus herbal acupuncture solution. In mice treated with Cervus elaphus sibiricusherbal acupuncture, the damage of synovial membranes of the joint was lessened, and differentiation of Th 1 cells was suppressed. The activation of RA-related cytokines such as MIF was suppressed, and the generation of $TNF-{\alpha}$ and MMP-9 showed a statistically significant decreas. Conclusions : It is speculated that Cervus elaphus sibiricus herbal acupuncture has the therapeutic effect of palliating the damage of the tissue impaired by RA by inhibition of the initial RA progression and by regulating excessive differentiation of Th 1 cell as it suppresses the generation of RA-related cytokines during the highest stage of RA by acting on pro-inflammatory enzymes.

• Journal of the Korean Society for Library and Information Science
• /
• v.30 no.1
• /
• pp.89-123
• /
• 1996

The world has moved from the Cold War between the east and the west and moved toward the age without idealogy. It places emphasis on economic benefit and welfare of its own nation as its main point With this world trend, in order to sam the competitiveness and the reconciliation of the divided nation the north and the south Korea should be united. Once the north and the south are united, information society will be altered with the huge flow of the civilization. At the same time, the issue of how to operate library policies and system, in which effective acquisition, manipulation, accumulation, and dissemination of information un would be very important. From this point of view, the following conclusions are obtained in this study. Firstly, when building a national library preparing for the national unification. it is essential to introduce 1) the concept of policy and system for information society and 2) that of policy and system which has national-culture as its focus. Secondly, it is essential to prepare the cooperative-structure between libraries prior to the national unification. This kind of cooperation should gradually expand to an extent that allows actual benefits such as building union catalog, inter-library loan system, resource sharing, standardized cataloging rules, and exchange of dissertation... etc. Thirdly, developing the library policies and systems for the national unification must be based on the concept of the mutual cooperation as inter-dependent model rather than on the concept of the incorporation-absorption as a dominant model. The next point the principles of the followings in preparing the library policies should be considered: 1) free-competition, 2) revolution of consciousness through the social education, 3) independence and love for humanity, 4) scientific or reasonable thinking, 5) job responsibility, 6) democratic citizenship, 7) mind far collective life, 8) spirit of public interest 9) globalization In addition, the model of the library systems preparing for thenational unification should include the followings : 1) uniformity of library system and its authority, 2) establishment of research institutes for library policy and system, 3) exchange of library establishment and information resources, 4) building library networks, 5) establishment of education systems for the library and information science and enhancement of its quality, 6) modernizing and developing information technology and its transfer. Finally, the libraries in the north and the south has different concepts, goals, information resources, and the different ways of using them. Considering the practical aspects of the libraries and the reasons for their existence, they must structure the mutual cooperative system so as to minimize the shock when confronting the social changes, so-called the national unification.