• Journal of Environmental Health Sciences
• /
• v.36 no.3
• /
• pp.236-246
• /
• 2010

In preparative anti-corrosive coating experiments, polyaniline was obtained by reacting an oxidizing agent with the monomer aniline. Further, the primer coating was prepared using a variety of widely-used materials such as urethane resin. For the top coating, epoxy resin and acrylic urethane resin were used. Characteristics of the coatings were assessed according to KS and ASTM specifications, and the structure of the polyaniline was characterized using FT-IR and TGA. For analysis of anti-corrosive properties in salt-spray experiments, measurements of the oxidation state of iron and surface atomic analysis were conducted using XPS and SEM-EDX. Unlike general anti-corrosive coatings which exhibit anti-corrosive effects only as a primer coating, the anti-corrosive coatings using polyaniline as the anti-corrosive pigment showed a marked synergistic effect with the top coatings. In other words, the top coatings not only produce a fine view effect, but also increase, through interaction with the primer coatings, the resistance to diffusion of corrosive factors from the external environment. It was also found that, unlike the heavy metal oxide-forming layer of the passive barrier alone, the polyaniline anti-corrosive pigment oxidized iron at the interface with the iron substrate to form a passive barrier in the oxidic layer, and itself formed a potential barrier layer with anti-corrosive factors from the external environment. Although the passive layer was damaged, the damaged area did not become completely oxidized iron; on the contrary, it showed a tendency to reduction. This can be interpreted such that a passive layer is formed again on the damaged area, and that at the same time there is a tendency to self-healing.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.53-58
• /
• 2017

In this study, to overcome a complicated shoe adhesion process such as buffing, pre-treatment by primer in the rubber component of the shoe, we studied adhesion and mechanical properties with rubber compound added $MgCl_2$. We determined adhesion properties of $MgCl_2$ content. Especially, the rubber containing $MgCl_2$ exhibited good adhesion properties to water-based adhesion. Since $MgCl_2$ is a water-soluble salt, it was judged that this phenomenon occurred. The results are confirmed by contact angle and surface morphology measurement. In addition, in the case of rubber compound added $MgCl_2$, the crosslinking efficiency was increased and the NBS resistance was increased.

• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.219-226
• /
• 2007

Pre-construction primer (PCP), or shopprimer, have been applied to steel plates to control temporary corrosion during ship fabrication. For surface preparation at ship block stage, in common shipyard practices, welding beads, burnt and rusted areas shall be blasted or power tool cleaned and the contamination such as zinc salt shall be removed with blasting or power tool. Whereas, the sound film of PCP needs not to be removed or roughened as the paint having good compatibility with PCP is used for the first coat. In many cases, however, full blasting or sweep blasting on the sound PCP treated block assemblies was requested. There still has been argument about the legitimacy of this practice, thus, it is critical to evaluate the quality of the coating system applied on the sound PCP retained condition, comparing with the one applied on the full blasted or sweep blasted condition. In this study, two different epoxy systems for water ballast tank were applied on the surfaces with sound PCP condition, full blasted condition, and sweep blasted condition. Coating performances such as durability, anti-corrosion, cathodic disbondment resistance were evaluated. The test results clearly indicated that the sound film of PCP needed not to be removed or roughened as the paint having good compatibility with PCP based on inorganic zinc silicate.

• Korean Journal of Microbiology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 1971

Among 50 yeasts of red pepper paste isolated and identified in the previous report, 12 strains of yeast which possess osmophilic and non-film characteristics were examined their growth rates and alcohol fermentation ability in red pepper medium. 5 strains of yeast possessing powerful growth rates and excellent alcohol fermentation ability were selected as excellent yeasts in this experiment. And their cultural conditions, salt resistance and red pepper concentration upon the growth were examined in this report. The results obtained were as follows ; 1) Among 12 strains of yeast, Saccharomyces cerevisiae group II(strain $D_1$), Saccharomyces oviformis($D_2$), Saccharomyces steineri($M_3$), Saccharomyces rouxii($D_9$) and Saccharomyces mellis($G_8$) were selected as excellent yeasts. 2) Among 5 strains of yeast selected, the strain $D_1$ and $D_2$showed the best alcohol fermentation ability and the best fermentative flavour. 3) The optimum temperature for growth of the strain $D_1$ and $D_2$ was $25^{\circ}C$$M_3$, $D_9$ and $G_8$ $30^{\circ}C$$D_1$ and $D_2$ was $62^{\circ}C$$M_3$,$D_9$ and $G_8$ ws 60.deg.C with treatment for 10 minutes. 4) The optimum pH for growth of all strains was around 5.0. 5) The strain $D_1$ and $M_3$were grown exceedingly well on the emdia containing 3 percent of NaCl and $D_2$,$D_9$ and $G_8$ on the media containing 6 percent of NaCl. 6) In the case of 5 percent of red pepper liquor added 5 percent of glucose was more nutritional than in the case of 5 percent glucose only. However, the growth rates of yeasts were restrained by the increase of red pepper concentration.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.334-344
• /
• 2014

The objective of this study was to evaluate the microbiological and physicochemical characteristics, and the antagonistic activity against Helicobacter pylori ATCC 43504, of yogurt fermented with the lactic acid bacteria from Baikkimchi kept under cold storage. The viable cell counts, titratable acidity, viscosity, and total solid content of the yogurt were different according to the bacterial strains used for fermentation. There was no significant change (P>0.05) in the various properties of refrigerated yogurt. Among the tested strains, the strongest resistance against artificial gastric juice and bile salt was found for Lactobacillus brevis BK11 and Lactobacillus paracasei BK57. Due to high lactic acid levels obtained from these two lactic acid bacteria, yogurt may show good anti-Helicobacter effects according to the time-kill assay. In particular, yogurt fermented with L. brevis BK11 significantly reduced the number of H. pylori adhering to gastric epithelial AGS cells and the urease activity of this pathogen (P<0.05).

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.397-405
• /
• 2001

In clod weather regions, a strong seasonal wind brings sea salts to the land. In addition to it, recently, the spreading amount of deicing salts has increased numerously for purpose of removing snow and ice. Thus the salts environment around concrete structures becomes so severe that various damages of concrete due to applied salts will be brought up. Much of countries such as America, Europe etc. is carried out study for effects of deicing salts on concrete. However, there are not test methods for deterioration of concrete subjected to both freezing-thawing and chloride in Korea. In this study, we carried out test for the compound deterioration subjected to both freezing-thawing and chloride attack, to investigate the effects of sodium chloride on the deterioration of concrete. The test was performed to investigate the effects of cement type, strength and air content on the scaling deterioration of concrete. As a result, the scaling deterioration was accelerated in the presence of salts. And the resistance to scaling was strongly influenced by the type of cement, the strength and air content of concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3587-3595
• /
• 2015

Low-carbon eco-friendly precast concrete (PC) box structure has been recently was developed as an low-cost infrastructure of near-surface transit system. The concrete of PC box was manufactured by industrial byproducts such as ground granulated blast furnace (GGBF) slag, flyash and rapid-cooling electric arc furnace (EAF) oxidizing slag, its mechanical property and durability were estimated in this study. Based on the mechanical and durability tests, it is found that low-carbon eco-friendly concrete shows high initial compressive strength, more than 90% of design strength (35MPa), and high resistance to salt-attack, chemical- attack and freeze-thaw. Therefore, low-carbon eco-friendly PC box concrete technology is expected to contribute to the railway with low environmental impact.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.102-105
• /
• 2002

ADSS(All Dielectirc Self-Supporting) cable installed under high voltage power cable line suffers a variety of environmental influence, rain, wind, snow fall, chemical pollution, salt fog and electrical stress. Its lifetime is required to be at least 20 years with this harsh weathering condition. The electrical stress under high voltage power line gives rise to dry band arcing and tracking, the severest damage, on the outer sheath of cable. Finally tracking might penetrate sheath and cause the break-down of ADSS cable. Tracking resistant sheath material, therefore, should be used to protect the core of ADSS from dry band arcing and to be sure long lifetime. In this work, we discuss various commercial tracking resistant material to investigate the way of track resistance and compare their mechanical, electrical, weathering and tracking properties through serial experiments. We found track resistant material is categorized into two main type : polyethylene with metal hydroxide and polyethylene with reduced carbon black. The Liquid contaminant, Inclined plane Tracking and Erosion test says the time to track of tracking resistant material with metal hydroxide has a little longer time to track in the high applied voltage than that with carbon black, but mechanical and weathering properties were inferior to.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.382-388
• /
• 2000

Polymer electrolyte films consisting of poly(vinylidenefluoride-hexafluoropropylene) (PVdF-HFP), LiClO$_3$ and a mixture of ethylene carbonate (EC) and ${\gamma}$-butyrolactone (GBL) were examined in order to obtain the best compromise between high ionic conductivity, homogeniety, dimensional and electrochemical stability. Measurements of ionic conductivity, differential scanning calorimetry and linear sweep voltammetry have been carried out for various compositions. The highest conductivity of 3.8$\times$10$^{-3}$ S$cm^{-1}$ / at 3$0^{\circ}C$ were obtained for a film of 30(PVdF-HFP)+7.8LiClO$_4$+62.2EC/GBL. From the DSC study, it has been found that the PVdF-HFP gels are stable up to 10$0^{\circ}C$, and the salt lowers the melting temperature of crystalline part of PVdF by interacting sensitively with polymer segments. When Lithium metal is in contact with the gel films, it tends to undergo corrosion and the reaction products accumulate resulting in the formation of a passive film on Li electrode. As the aging time progresses, the interfacial resistance increases continuously. Anodic stability is measured to extend up to about 4.5 V vs. Li.

• Journal of Korean Medicine for Obesity Research
• /
• v.13 no.1
• /
• pp.24-32
• /
• 2013

Objectives: The aim of this study is to investigate anti-imflammatory and protective effect for intestinal epithelial cells with Atractylodes macrocephae (AM), a traditional Korean Herbal medicine and fermented Atractylodes macrocephae (FAM) with Lactobacillus plantarum. Methods: HCT-116 and Raw 264.7 cells were used in this study. Using NO assay, we measured lipopolysaccharide (LPS)-induced anti-inflammatory effect. We measured permeability of intestinal epithelial cells with transepithelial electrical resistance and horseradish peroxide flux assay. Water soluble tetrazolium salt assay was used to see cell proliferation. All the results were presented in mean and standard deviation. We used Student's t-test for analyzing significance of results. Results: In Raw 264.7 cells NO production decreased 22.4% with pre-treatment of AM and FAM, especially with FAM in high concentration. In HCT-116 cells LPS-induced intestinal permeability had a protective effect with both AM and FAM, which was also tend to be proportional to the concentration. Cell viability increased up to 135.52% after treatment of high concentration of FAM in HCT-116, while there was no significant change in Raw 264.7 cells with herb treatments. Conclusions: These results show evidence that AM, especially fermented ones, significantly reduced intestinal membrane permeability. They also had a protective effect as well as an anti-inflammation effect for HCT-116 and Raw 264.7 cells. This suggest that FAM may be a therapeutic agent for Leaky gut syndrome by reducing intestinal permeability.