• Water for future
• /
• v.24 no.4
• /
• pp.49-58
• /
• 1991

Flood routing in the Youngsan River was performed for the flood event of July, 1989 by two finite difference methods. The Saint Venant eq., a kind of hyperbolic partial differential equation is employed as governing equation and the explicit scheme (Leap Frog) and implicit scheme (Preissmann) are used to discretize the GE. As for the external boundary conditions, discharge and tidal elevation are upstream and downstream BC, respectively and estuary dam is included in internal BC. Lateral inflows and upstream discharges are the hourly results from storage function method, At Naju station, a Relatively upstream points in this river, the outputs are interpreted as good ones by comparing two numerical results of FDMs with the observed data and the calibrated results by storage function method. and two computational results are compared at the other sites, from middle stream and downstream points, and thus are considered reliable. Therefore, we can conclude from this research that these numerical models are adaptable in simulating and forecasting the flood in natural channels in Korea as well as existing hydrologic models. And the study about optimal gate control at the flood time is expected as further study using these models.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.252-262
• /
• 2008

In the uniaxial compressive test of a single specimen of transversely isotropic rock, its 5 independent elastic constants can not be defined since maximum 4 independent strain measurements are available theoretically. In order to solve this problem, one equation proposed by Saint Venant in 19C and confirmed by Lekhnitskii through the test experiences has been used for long time. Accordign to authors' experiences, however, this equation turned out to give erroneous elastic constants in some cases. Three new equations are suggested and their compatibilities are discussed in this paper. As the results of the analyses of the models, Lekhnitskii's suggested equation is effective for the specimen with the high dip angle whereas it results in the large erred output for that with dip angle less than $25{\sim}30$. It was found that the effectivenesses of three suggested equations and their compatibilities are subject to the dip angle and not to the amounts of elastic constants. Guide map to the selection of the compatible one of those suggested equations is presented as a result of the study.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.71-76
• /
• 1981

In order to make a numerical modeling for the one dimensional unsteady flow which expressed by Saint Venant partial differential equations, Preissmann's implicit scheme was used, and it's stability and accuracy was mentioned. By introducing recurrence relations make it possible to use double sweep algorithm. Effective parameters to the result were the values of the $\Delta$t/$\Delta$x, $\theta$ and the chezy coefficient. In oder to get numerical solutions with enough accuracy, $\Delta$t/$\Delta$x should not be far from the value of 1, and the criteria of the $\theta$ was 0.6<$\theta$<1.0 for the stability without condition. This model should be calibrated by real field data, and expected to be developed for the simulation of the river system and to the long wave analysis for one dimensional coastal zone problem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.174-174
• /
• 2015

국내의 국지성 집중호우와 같은 기후변화와 토지피복율 증가 등 복합적인 원인으로 인한 표면 유출수의 증가로 도시에서의 내수침수가 매년 빈번하게 발생하고 있다. 이러한 도심지 돌발홍수로 인한 피해에 대한 구조적인 대책으로 지하방수로가 효과적인 방안으로 대두되고 있으며, 현재 신월빗물저류배수시설이 설계단계에 있다. 그러나 미국, 일본 등의 국외의 기설치된 지하방수로에서 발생되는 Geyser 현상으로 인한 피해에 대한 연구는 국외에 비해 미비한 편이므로, 선행적으로 Geyser에 대한 물리기반의 동수역학적인 이해가 필요한 실정이다. Geyser는 홍수 시 급격한 유량의 유입으로 단파가 발생하여 지하방수로 내 공기의 압축이 발생하고 수직관을 통해 공기가 물과 함께 지상으로 분출되면서 발생된다. 따라서 공기와 물의 혼합 유동을 모의해야 하며 동시에 단파의 불연속성을 모의하기 위해서는 기존의 상용프로그램으로는 다소 어려움이 있다. 이에 본 연구에서는 지하방수로의 Geyser 현상의 발생 예측을 위해 1차원 Saint-Venant 방정식을 지배방정식으로 선정하였으며, 단파 발생을 수치적으로 안정적으로 모의하기 위해 Roe Approximate Riemann 수치기법을 사용하였다. 또한 공기의 압력항을 고려하기 위해서 수정된 형태의 Preissmann slot 모형을 적용하였다. Geyser 현상의 영향인자로서 지하방수로 수평관의 직경, 마찰계수, 바닥경사, 초기수위, 유입유량을 고려하였으며 상류에서 유입되는 유량에 의한 하류에서의 동수역학적 거동을 분석하였다. 5개의 영향인자의 변화에 따른 단파의 유입속도 및 공기부 압력의 변화를 관찰하여 Geyser 현상에 대한 동수역학적 검토를 수행하였다. 추후 본 연구결과를 적절히 활용한다면 지하방수로의 사용 안정성을 확보하고, 홍수발생 시 모니터링 인자도출에 도움이 될 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.387-387
• /
• 2015

최근 기후변화에 따른 국지성 집중호우 및 돌발홍수 증가로 도심지역에 많은 침수 피해가 발생하고 있다. 본 연구는 이러한 내외수에 영향을 받는 도시 중소하천의 침수 저감을 위하여 침수 예측모형에 적용 가능한 수리학적 계산모형을 개발하는 것이다. 일반적으로 자연하천은 수지형 수계가 대부분이며, 도시 우수관로와 관계배수 시스템 등은 폐합형 수계에 포함되어 수지형 계산모형으로는 도시 중소하천의 유출 모의를 할 수 없다. 폐합형 수계의 계산모형은 수지형에 비해 복잡하지만, 적용대상 수계가 폐합형이 아닌 경우에도 합류점의 유입량을 처리하기가 편리하고, 역방향의 월류 흐름이 존재하는 감조하천에서의 월류 흐름 모의가 가능한 장점을 갖고 있어 도시 내배수 시스템은 물론 자연하천에도 적용 할 수 있다. 본 모형은 절점, 수로 및 계산점으로 구성되는데 동력학적 방법인 1차원 Saint-Venant의 연속 방정식과 운동량 방정식에 수치해법을 이용하여 구하고자 하는 시간과 지점의 수위와 유량을 계산할 수 있게 구성하였다. 수치해법으로는 가장 보편적으로 사용되는 유한차분법 중 안정성과 정확성이 우수한 것으로 평가된 Preissmann의 4점 음해법으로 차분방정식에 Newton-Raphson 방법을 사용하여 유량과 수위 보정치에 Double Sweep 알고리즘을 적용하였다. 유한차분법은 안정성 문제를 수반할 수 있기에 시간 증분이 작을수록 Courant 조건을 만족할 수 있다. 모형 비교 검증을 위하여 동력학적 방법을 적용한 대표적인 폐합형 수계모형인 EPA SWMM을 지원하는 CHI사의 PC-SWMM 프로그램을 이용하여 가상의 폐합 수계를 구축하였다. 일반적으로 상류지점의 경계조건은 하류로 추적될 입력 자료로써, 상류지점과 합류지점은 유입되는 유량값을 그리고 하류지점은 유출되는 수위값을 경계조건으로 입력하였다. 운동량방정식의 에너지 경사와 마찰경사 항에 포함된 조도계수는 변화량에 중요한 물리적 요소이지만, 고정 상수값인 0.03을 적용하여 검증에 용의하도록 하였다. 구축된 모형과 PC-SWWM을 통해 산출된 계산점별 수위와 유량에 RMS 오차를 비교한 결과 만족할만한 결과를 얻을 수 있었다. 따라서 향후 내외수를 연계에 침수예측모형에 적용 가능할 것으로 사료된다.

• Steel and Composite Structures
• /
• v.23 no.4
• /
• pp.473-481
• /
• 2017

Steel plate shear wall (SPSW) system has been increasingly used for lateral loads resisting system since 1980s when the utilization of post-buckling strength of SPSW was realized. The structural response of SPSWs largely depends on the behavior of the surrounded beams. The beams are normally required to behave in the elastic region when the SPSW fully buckled and formed the tension field action. However, most modern design codes do not specify how this requirement can be achieved. This paper presents theoretical investigation and design procedures of manually calculating the plastic flexural capacity of the beams of SPSWs and can be considered as an extension to the previous work by Qu and Bruneau (2011). The reduction in the plastic flexural capacity of beam was considered to account for the presence of shear stress that was altered towards flanges at the boundary region, which can be explained by Saint-Venant's principle. The reduction in beam web was introduced and modified based on the research by Qu and Bruneau (2011), while the shear stress in the web in this research is excluded due to the boundary effect. The plastic flexural capacity of the beams is given by the superposition of the contributions from the flanges and the web. The developed equations are capable of predicting the plastic moment of the beams subjected to combined shear force, axial force, bending moment, and tension fields induced by yielded infill panels. Good agreement was found between the theoretical results and the data from previous research for flexural capacity of beams.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.404-410
• /
• 2011

For the simulation of one-dimensional unsteady flow, the Taylor-Galerkin finite element method was adopted to the discretization of the Saint Venant equation. The model was applied to the backwater problem in a single channel and the flood routing in dendritic channel networks. The numerical solutions were compared with previously published results of finite difference and finite element methods and good agreement was observed. The model solves the continuity and the momentum equations in a sequential manner and this leads to easy implementation. Since the final system of matrix is tri-diagonal with a few additional entry due to channel junctions, the tri-diagonal matrix solution algorithm can be used with minor modification. So it is fast and economical in terms of memory for storing matrices.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1982.07a
• /
• pp.27-32
• /
• 1982

In other to make a numerical modeling for the one dimensional unsteady flow which expressed by Saint Venant partial differential equations, Preissman's implicit scheme was used, and it's stability and accuracy was investigated. By introducing recurrence relations make it possible to use double sweep algorithm. Effective parameters to the result were the values df the $$ and the Chezy coefticient. In other to get numberical solutions with enough accuracy, $$ should not be far from the value of1, and when the criteria of the $$ was 0.6<$$<1.0, the result was alaways stable for any condition. This model should be calibrated by real fileld data, and expected to be developed for the simulation of the river system and to the long wave analysis for one dimensional coastal zone problem.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.4
• /
• pp.23-32
• /
• 1988

The rates of infiltration contributed to the flow fo water in an unconfined aquifer under the partially penetrated stream at an ungaged station and the corresponding base flow in channel are coupled by using the hydraulic and/or hydrologic characteristics obtained from the geomorphologic and soil maps. For the determination of groundwater flow, the linearized model which is originally Boussinesq's nonlinear equation is applied in this study. Also, a stream flow routing model for base flow in channel is based on a simplification of the Saint-venant. The distributed runoff model with piecewise spatial uniformity is presented for obtaining its solution based on a finite difference technique of the kinematic wave equations. The method developed in this study was tested to the Bocheong watershed(area : $475.5km^2$) of the natural stream basin which is one of tributaries in Geum River basin in Korea. As a result, it is suggested that the rationality of hydro-graph separation according to a wide variability in hydrogeologic properties be worked out as developing the physically based subsurface model. The results of the present model are shown to be possible to simulate a base flow due to an arbitrary rate of infiltration for ungaged basins.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1032-1038
• /
• 2000

The stress field in the body by tangential loading of a rectangular patch on a semi-infinite solid has been solved analytically using potential function. The validity of result of this study was proved by Saint-Venant's principle in the remote region and in the vicinity of the surface with superposition of point loads.