• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.775-784
• /
• 2009

This paper summarizes the tests performed in the ATLAS facility during its first two years of operation (2007${\sim}$2008). Two categories of tests have been performed successfully: (a) the reflood phase of the large-break loss-of-coolant accidents in a cold leg, and (b) the breaks in one of four direct vessel injection lines. Those tests contributed to understanding the unique thermal-hydraulic behavior, resolving the safety-related concerns and providing an evaluation of the safety analysis codes and methodology for the advanced pressurized water reactor, APR1400. Several important and interesting phenomena have been observed during the tests. In most cases, the ATLAS shows reasonable accident characteristics and conservative results compared with those predicted by one-dimensional safety analysis codes. A wide variety of small-break LOCA tests will be performed in 2009.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.175-186
• /
• 2011

Previous evaluations of the safety of the Ulchin Nuclear Power Plant in the event of a tsunami have the shortcoming of uncertainty of the tsunami sources. To address this uncertainty, maximum and minimum wave heights at the intake of Ulchin NPP have been estimated through a parametric study, and then assessment of the safety margin for the intake has been carried out. From the simulation results for the Ulchin NPP site, it can be seen that the coefficient of eddy viscosity considerably affects wave height at the inside of the breakwater. In addition, assessment of the safety margin shows that almost all of the intake water pumps have a safety margin over 2 m, and Ulchin NPP site seems to be safe in the event of a tsunami according to this parametric study, although parts of the CWPs rarely have a margin for the minimum wave height.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.365-376
• /
• 2010

This paper summarizes the results of a Writing Group on the Extension of CFD codes to two-phase flow safety problems, which was created by the Group for Analysis and Management of Accidents of the Nuclear Energy Agency' Committee on the Safety of Nuclear Installations (NEA-CSNI). Two-phase CFD used for safety investigations may predict small scale flow processes, which are not seen by system thermalhydraulic codes. However, the two-phase CFD models are not as mature as those in the single phase CFD and potential users need some guidance for proper application. In this paper, a classification of various modelling approaches is proposed. Then, a general multi-step methodology for using two-phase-CFD is explained, including a preliminary identification of flow processes, a model selection, and a verification and validation process. A list of 26 nuclear reactor safety issues that could benefit from investigations at the CFD scale is identified. Then, a few issues are analyzed in more detail, and a preliminary state-of-the-art is proposed and the remaining gaps in the existing approaches are identified. Finally, guidelines for users are proposed.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2716-2727
• /
• 2021

The core shroud is one of the most important internal components of the reactor vessel internals because it meets the neutron fluence directly emitted by the nuclear fuel. In particular, dynamic effects for an earthquake should be evaluated with respect to the neutron irradiation flux. As a prerequisite to this study, simplified and detailed finite element models are developed for the core shroud using the ANSYS Design Parametric Language. Using the El Centro earthquake, seismic analyses are performed for the simplified and detailed core shroud models. Modal characteristics are obtained and their results are used for a time history analysis. Response spectrum analyses are also performed to access the degree of seismic excitation. The results of these analyses are compared to investigate the response characteristics between the simplified and detailed core shroud models from the time history and response spectrum analyses.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1289-1296
• /
• 2019

Non-functional requirements plays a critical role in designing variety of applications domain ranges from safety-critical systems to simple gaming applications. Performance is one of the crucial non-functional requirement, especially in control and safety systems, that validates the design. System risk can be quantified as a product of probability of system failure and severity of its impact. In this paper, we devise a technique to do the performance analysis of safety critical and control systems and to estimate performance based risk factor. The technique elaborates Petri nets to estimate performability to ensure system dependability requirements. We illustrate the technique on a case study of Nuclear Power Plant system. The technique has been validated on 17 safety critical and control systems of Nuclear Power Plant.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2690-2701
• /
• 2022

In this paper, we select important fission products for the estimation of the source term during a severe accident of a PWR. The selection is based on the numerical results obtained from depletion calculations for the typical PWR fuel via the in-house code named DEGETION (Depletion, Generation, and Transmutation of Isotopes on Nuclear Application), release fractions of the fission products derived from NUREG-1465, and effective dose conversion coefficients from ICRP 119. Then, for the selected fission products, we obtain the adjoint solutions of the Bateman equations for radioactive decay in order to determine the importance of precursors producing the aforementioned fission products via radioactive decay, which would provide insights into the assumption used in MACCS 2 for a level 3 PSA analysis in which up to six precursors are considered in the calculations of radioactive decays for the fission product after release from the reactor.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1454-1463
• /
• 2021

Demographics, personality traits and attitudes are related to safety behaviors in varied workplaces, but their roles in nuclear power plants (NPPs) have not been fully understood. This study was conducted to explore the roles of a set of demographic, personality and attitudinal factors on self-reported safety behaviors (including safety participation and human errors) among NPP commissioning workers. Survey data were collected from 157 Chinese commissioning workers. Results showed that age and work experience were significantly associated with human errors, but not with safety participation. Neuroticism and conscientiousness were significantly related to human errors, while neuroticism, conscientiousness and agreeableness were significantly related to safety participation. Attitude towards questioning was observed as an antecedent of safety participation, and functioned as a mediating variable in the relation between conscientiousness and safety behaviors. The findings provide evidence-based implications on the design of diverse interventions and strategies for the promotion of safety behaviors in NPPs.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.53-63
• /
• 2012

The purpose of this study is to grasp foreign worker's industrial safety and health state, which find out the improvement to secure the basic safety net for foreign workers. We have investigated 2,050 workers through direct interviews during the period from April 12, 2010 to May 31, 2010. And the result of analysis, foreign worker's daily average working time is 10.6 hours(40.8% workers in total work 10~12 hours), the extent of exposure to harmful and dangerous working environment is 'the position which cause pain in neck, waist, hands, shoulders, legs'(69.3%), 'repetitive hands and arms movement'(66.1%). It showed 'experience of accident damage or disease related work'(27.3%), 'never apply for industrial accident compensation' is revealed high at 73%. As a result of completing a safety health education for a year, it showed 'never educated'(40.2%), 'the institute that foreign workers have used for help and advice is the foreign worker's support center'(61.9%) Thus, hiring foreign workers in the company are small in site, the environment is too harmful and dangerous. In addition, no safety and health managers, legally blind spot located in the health and safety, because it is an urgent meet for these measures to improve.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.169-174
• /
• 2018

There are many CCTV cameras connected to the video surveillance and monitoring center for the safety of citizens, and it is difficult for a few monitoring agents to monitor many channels of videos. In this paper, we propose an intelligent video surveillance system utilizing a safety map to efficiently monitor many channels of CCTV camera videos. The safety map establishes the frequency of crime occurrence as a database, expresses the degree of crime risk and makes it possible for agents of the video surveillance center to pay attention when a woman enters the crime risk area. The proposed gender classification method is processed in the order of pedestrian detection, tracking and classification with deep training. The pedestrian detection and tracking uses Adaboost algorithm and probabilistic data association filter, respectively. In order to classify the gender of the pedestrian, relatively simple AlexNet is applied to determine gender. Experimental results show that the proposed gender classification method is more effective than the conventional algorithm. In addition, the results of implementation of intelligent video security system combined with safety map are introduced.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.11-21
• /
• 2021

In order to explore the job crafting experience of millennial safety workers, this study conducted a qualitative case research with five safety workers of S Energy from March 26 to September 27, 2021 . As a result of the analysis, task crafting showed 'matching one's strong suit with a given task', 'expanding work knowledge using social network service (SNS)', and 'making changes in job performance methods for preemptive safety management activities'. Also, Cognitive crafting showed 'recognition of social vocation as a safety job', 'recognition of a role to grow as a safety management expert', and 'cognitive changes from means of organizational adaptation to enjoyment and energy of life'. At the same time, in relation crafting, 'establishment of amicable relationships through SNS in non-face-to-face and rapid communicating situations', 'safety management made through with mutual cooperations between business people', and 'reborn as a mutual safety net in business relationships' appeared. These can be used as basic data to accumulate the theoretical basis for job crafting research of millennial safety workers and to improve their job satisfaction. A follow-up study was proposed for safety workers with occupations of various kinds.