• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2682-2695
• /
• 2021

This paper aims to evaluate the structural dynamic responses and damage/failure of the nuclear fuel reprocessing plant under the free drop impact of spent fuel cask (SFC) and fuel assembly (FA) during the on-site transportation. At the present Part I of this paper, the large-scale SFC model free drop test and the corresponding numerical simulations are performed. Firstly, a composite target which is composed of the protective structure, i.e., a thin RC plate (representing the inverted U-shaped slab in the loading shaft) and/or an autoclaved aerated concrete (AAC) blocks sacrificial layer, as well as a thick RC plate (representing the bottom slab in the loading shaft) is designed and fabricated. Then, based on the large dropping tower, the free drop test of large-scale SFC model with the mass of 3 t is carried out from the height of 7 m-11 m. It indicates that the bottom slab in the loading shaft could not resist the free drop impact of SFC. The composite protective structure can effectively reduce the damage and vibrations of the bottom slab, and the inverted U-shaped slab could relieve the damage of the AAC blocks layer dramatically. Furthermore, based on the finite element (FE) program LS-DYNA, the corresponding refined numerical simulations are performed. By comparing the experimental and numerical damage and vibration accelerations of the composite structures, the present adopted numerical algorithms, constitutive models and parameters are validated, which will be applied in the further assessment of drop impact effects of full-scale SFC and FA on prototype nuclear fuel reprocessing plant in the next Part II of this paper.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.3
• /
• pp.17-26
• /
• 2020

Purpose: This paper presents research evidence that the environmental design of the doffing area in a biocontainment unit (BCU) can have a measurable impact on increasing the safety of frontline healthcare workers (HCW) during doffing of high-level personal protective equipment (PPE), and proposes optimized biocontainment unit design. Methods: From 2016 to 2019, The SimTigrate Design Lab conducted 3 consecutive studies, focusing on ways in which the built environment may support or hinder safe doffing. In the first study, to identify the risky behaviors, we observed 56 simulation exercises with HCWs in 4 BCUs and 1 high-fidelity BCU mockup. In the second study, we tested the effectiveness of a redesigned doffing area on improving the HCWs performance and used simulation, observation, and rapid prototyping in 1 high-fidelity mockup of a doffing area. In a follow-up study, we used simulation and co-design with HCWs to optimize the design of a safer doffing area in a full-size pediatric BCU mock-up. Results: We identified 11 specific risky behaviors potentially leading to occupational injury, or contamination of the PPE, or of the environment. We developed design strategies to create a space for safer doffing. In the second study, in a redesigned doffing area, the overall performance of HCW improved, and we observed a significant decrease in the number of risky behaviors; some risky behaviors were eliminated. There was a significant decrease in physical and cognitive load for the HCWs. Finally, we propose an optimized layout of a BCU for a safer process of PPE doffing. Implications: The proposed BCU design supports better staff communication, efficiency, and automates safer behaviors. Our findings can be used to develop design guidelines for spaces where patients with other highly infectious diseases are treated when the safety of the patient-facing HCWs is of critical importance.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.74-79
• /
• 2015

The purpose of this study is to find out its effect on changes in the joint angle and the success rate of cardiopulmonary resuscitation by conducting cardiopulmonary resuscitation (CPR) when wearing and not wearing PPE (personal protective equipment) targeting 20 paramedics with more than 5 years of experience. The subjects carried out CPR in 30:2 for 4 minutes and collected images were digitized by Kwon3D XP Software Package(Version 4.0) and then data were obtained. Data, which were collected by analyzing the motion when starting in one cycle, when pressing to the maximum, in the final position (relaxed), were analyzed by using SPSS 18.0. In conclusion, during CPR, the angle of the both shoulder joints was not significant (p>.05) and the angle of the right elbow joint was reduced in all positions and was statistically significant (p<.05) and the angle of the left was significantly reduced in the maximum pressure posture and the final position (p>.05). In the case of the trunk, the angle increased statistically significantly at all stages (p<.01, p<.001). Also, during CPR, the average compression rate was significantly reduced after wearing PPE (p<.05) and average hand escape time by cycle increased statistically significantly (p<.05) but chest compression execution rate at the correct depth did not show any significant difference between the two groups (p>05).

• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.172-180
• /
• 2016

This study was conducted to evaluate the relations between the exposure level of organophosphates (OPs) pesticide and application factors among rural farmers. The urinary dialkylphosphates, metabolites of organophosphorus pesticides, including DMP, DEP, DMTP and DETP were analyzed by GC/MSD and GC/MS/MS. The DMP and DMTP were detected more in the use of a speed sprayer without cap than with a capped one. Also, the less farmers wore the personal protective equipment (PPE), the more these were detected. The amount of organophosphorus exposure was the highest in the use of a power sprayer. However, it was low when a farmer applied pesticides with a speed sprayer with cap and wore more PPE. In this study, the detection rate was analyzed by chi-square test, the exposure level of OPs was analyzed by a generalized linear model.

• The Korean Journal of Community Living Science
• /
• v.26 no.4
• /
• pp.647-659
• /
• 2015

This study analyzes current technologies in personal protective equipment (PPE) and mechanisms that can be used in the agricultural field to provide data for research and development on PPE for farmers. There is growing awareness of the importance of PPE as part of efforts to reduce agricultural accidents, but data remain rare for developing PPE tailored to the farm work environment. In this regard, patent data on PPE can provide useful insights for facilitating relevant technologies and research. This study examines patents and utility models classified under the IPC code in Korea and other countries to analyze patented technologies and recent trends for the period from January 2003 to October 2014. Here Korea, the U.S., Japan, and Europe were considered. The results show that the number of patent applications for PPE remained steady without any sharp fluctuations. KIPO applications accounted for 43.5% of all cases, reflecting the highest proportion among the countries considered. Domestic applicants accounted for 94% of all cases. In Korea, patent applications were concentrated in safety gear for the face and eyes, indicating a high level of technology. The highest level of competition was observed for safety goggles in all countries. Some PPE technologies were dominated by a particular manufacturer. The analysis results for farming-related technologies show the current state of technologies and areas lacking technological development. This study analyzes patented technologies for PPE in Korea and other countries and recent research trends as part of the effort to develop PPE for workers in the farming and livestock industry. This study represents an early-stage effort to develop PPE for workers in the farming and livestock industry, and the results are expected to be useful for tailoring PPE to Korea's farming and livestock environment.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.336-347
• /
• 2011

Objectives: In Korea, an average of 258 workers claim compensation for their noise-induced hearing loss (NIHL) on an annual basis. Indeed, hearing disorder ranks first in the number of diagnoses made by occupational medical check-ups. Against this backdrop, this study analyzed the impact of 19 types of noise-generating machines and equipment on the sound pressure levels in workplaces and NIHL occurrence based on a 2009 national survey on work environments. Methods: Through this analysis, a series of statistical models were built to determine posterior probabilities for each worksite with an aim to present risk ratings for noise levels at work. Results: It was found that air compressors and grinding machines came in first and second, respectively in the number of installed noise-generating machines and equipment. However, there was no direct relationship between workplace noise and NIHL among workers since noise-control equipment and protective gear had been in place. By building a logistic regression model and neural network, statistical models were set to identify the influence of the noise-generating machines and equipment on workplace noise levels and NIHL occurrence. Conclusion: This study offered NIHL prevention measures which are fit for the worksites in each risk grade.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.267-271
• /
• 2023

Background: The objective of this study is to identify the working conditions and health status of Vietnamese male migrant workers in Republic of Korea, in comparison to the Korean general population. Methods: We conducted our survey through the Migrant People Center, and we received completed questionnaires from 87 male Vietnamese migrant workers. The questionnaire employed was identical to those used in the Korean Working Conditions Survey and the 2020 Korea National Health and Nutrition Examination Survey. The collected data from the Vietnamese migrant workers was then compared with the Korean reference population using indirect age-standardization. Results: Vietnamese male workers demonstrated a higher prevalence of health problems including hearing problems (age-standardized prevalence ratio (aSPR) 13.22, 95% confidence interval [CI]: 8.07-20.4), skin problems (aSPR 13.49, 95% CI: 8.07-20.4), and low back pain (aSPR 8.40, 95% CI: 6.50-10.69). Elevated exposure to workplace hazards such as chemicals (aSPR 2.36, 95% CI: 1.51-3.51), organic solvents (aSPR 2.22, 95% CI: 1.44-3.28), handling of heavy objects (aSPR 1.67, 95% CI: 1.24-2.21), and high temperatures (aSPR 1.96, 95% CI: 1.46-2.57) was observed among them. Additionally, they faced a higher risk of no personal protective equipment (aSPR 2.53, 95% CI: 1.26-4.52) and a greater prevalence of unmet medical needs (aSPR 7.14, 95% CI: 4.74-10.32). Conclusion: Our findings highlight the elevated workplace hazards, health problems, and unmet medical needs among Vietnamese male workers compared to the Korean reference population. These findings underscores the urgency for enhanced scrutiny over working conditions and protective equipment provision, coupled with efforts to improve healthcare accessibility and worker education.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.2
• /
• pp.215-224
• /
• 2016

Objectives: The purpose of the study was to investigate the related factors of performance of radiation safety management in dental hygienists. Methods: A self-reported questionnaire was completed by 183 dental hygienists using dental radiography in 110 dental clinics in G area by convenience sampling methods. The questionnaire consisted of general characteristics of the subjects, radiation-related characteristics, and performance and management of radiation safety. Results: Performance score of radiation safety management was $35.71{\pm}12.49$ in dental hygienists. The performance score of radiation safety management were associated with sex, numbers of dental hygienists, the average numbers of admitted patients per day, the total clinical experience, existence of manual for radiation safety management and perceived need for education of radiation safety management. Conclusions: The performance score was relatively low. The performance score was associated with radiation safety manual and safety equipment. The preparation of radiation protective environment and equipment will improve the performance of radiation safety management in dental hygienists.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.136-141
• /
• 2013

Background: Occupational end users of pesticides may experience bodily absorption of the pesticide products they use, risking possible health effects. The purpose of this paper is to provide a guide for researchers, practitioners, and policy makers working in the field of agricultural health or other areas where occupational end use of pesticides and exposure issues are of interest. Methods: This paper characterizes the health effects of pesticide exposure, jobs associated with pesticide use, pesticide-related tasks, absorption of pesticides through the skin, and the use of personal protective equipment (PPE) for reducing exposure. Conclusions: Although international and national efforts to reduce pesticide exposure through regulatory means should continue, it is difficult in the agricultural sector to implement engineering or system controls. It is clear that use of PPE does reduce dermal pesticide exposure but compliance among the majority of occupationally exposed pesticide end users appears to be poor. More research is needed on higher-order controls to reduce pesticide exposure and to understand the reasons for poor compliance with PPE and identify effective training methods.

• Analytical Science and Technology
• /
• v.26 no.5
• /
• pp.315-325
• /
• 2013

The possibility of acute hepatotoxicity caused by dimethylformamide (DMF) requires regular monitoring of the workers who are using DMF to prevent the occupational disease. The authors performed ambient and biological monitoring of workers involved in synthetic leather manufacturing processes using DMF to assess the correlation between the markers of ambient and biological monitoring of DMF. The authors monitored 142 workers occupationally exposed to DMF from 19 workshops in the synthetic leather and ink manufacturing industries located in northern region of Gyeonggi-do. The subjects answered questionnaire on work procedure and use of personal protective equipment to be classified by exposure type. DMF in air samples collected using personal air samplers, diffusive and active sampler, was analysed using gas chromatograph-flame ionization detector (GC-FID) with DB-FFAP column (length 30 m, i.d. 0.25 mm, film thickness 0.25 ${\mu}m$). Urinary N-methylformamide (NMF) was analysed using gas chromatograph-mass selective detector (GC-MSD) at selected ion monitoring (SIM) mode with DB-624 column (length 60 m, i.d. 0.25 mm, film thickness 1.40 ${\mu}m$). Geometric mean (GM) and geometric standard deviation (GSD) of the ambient DMF was $6.85{\pm}3.43$ ppm, and GM and GSD of urinary NMF was $42.3{\pm}2.7$ mg/L. The ratio of subjects with DMF level over 10 ppm was 44%, and those with urinary NMF over 15 mg/L was 87%. NMF in urine adjusted by DMF in air was $4.61{\pm}2.57$ mg/L/ppm and $9.50{\pm}2.41$ mg/L/ppm, respectively, with or without respirator. There was seasonal differences of NMF in urine adjusted by DMF in air, $7.63{\pm}2.74$ mg/L/ppm in summer and $4.53{\pm}2.29$ mg/L/ppm in winter. The urinary NMF concentration which corresponds to 10 ppm of ambient DMF was 52.7 mg/L (r=0.650, n=128). Considering the difference of the route of exposure which resulted from the compliance of wearing personal protective equipment, the estimated contribution of respiratory and dermal exposure route for DMF was 48.5% vs. 51.5%.