• International Journal of Safety
• /
• v.6 no.2
• /
• pp.27-32
• /
• 2007

For last several decades with the achievement of fast economic development, the electrical fires occupies over 30 percent of total fire incidents almost every year in Korea and not decreased in spite of much times and efforts. Electrical fire cause diagnostics are to confirm a cause for the fire by examination of fire scene. Cause diagnosis methods haven't been systematized yet, because of limits for available information, investigator's biased knowledge, etc. Therefore, in order to assist the investigators and to find out the exact causes of electrical fires, required is research for an electrical fire cause diagnosis system using DB, computer programming and some mathematical tools. The electrical fire cause diagnosis system has two functions of DB and electrical fire cause diagnosis. The cause diagnosis is conducted by a case-based reasoning on a case base and rule-based reasoning on a rule base. For the diagnosis with high reliability, a mixed reasoning approach of a case-based reasoning and fuzzy rule-based reasoning has been adopted. The electrical fire cause diagnosis system proposes the electrical fire causes inferred from the diagnosis processes, and possibility of the causes as well.

• Journal of the Korean Society of Safety
• /
• v.29 no.2
• /
• pp.12-17
• /
• 2014

This paper is aimed to analyze the characteristics of simultaneous voltage, current and temperature signals for poor connection on electrical connector. In order to attain this purpose, detected were the current and voltage signals on electric wire with series arc, named arc signals, and also monitored were the changes of RMS, instantaneous value of waveform in time domain and temperature value with video. Two states are made normal state over $5kgf{\cdot}cm$ and poor connections state below $0.5kgf{\cdot}cm$ by screw gage. In the voltage signal case, the voltage drop was increased with which the current was increased. In the current signal case, poor connections at the time interval 1~4A all showed "shoulder", as distinct difference from the normal state shown waveform pattern. In the temperature signal case, poor connections are twice at 1A and five times at 4A in the normal state. The temperature continues insulation of electrical wiring and connector can be carbonized. The results of this study will be effectively used in developing the preventive devices and system for electric fire by poor connections.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.213-220
• /
• 2000

Numerical modeling of cut slope has some limits in simulating the real slopes. In the case of 2D analysis of slope stability, it is assumed that slope is simply straight even when it is concave or convex in plan view. In this study, 3D analysis in curved shape slopes has been conducted for the comparison with 2D analysis in terms of failure mode and factor of safety. For this, 3D analysis by FLAC3D was compared with 2D analysis in plane strain condition and axi-symmetric model condition by FLAC. It was also observed how safety factors of slopes were affected by the variation of the tensile strength and cohesion, which are important variables to decide whether the slope fails or not. 2D analysis of concave slopes under plane strain condition showed much smaller safety factors by 16-40 % errors depending on the radius of curvature of slopes, compared to the more realistic values from 3D analysis. In case of convex slopes, the lower values by 7-10 % has been reported. 2D analysis of axi-symmetric model showed also smaller safety factors by 6-10 % and by 2-4 %, in case of concave and convex slopes, respectively. Such results are expected to contribute to the better understanding of failure process and could be applied for improved design of slopes.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.662-667
• /
• 2016

As electric and electronic control systems have sharply increased in vehicles, safety accident has emerged as an important issue. Therefore, in order to ensure safety of the vehicle, engineers are required to identify the hazards utilizing PHA and HAZOP, etc. in the early phase of development and implement safety mechanisms to prevent them. HAZOP has been widely used in a systematic manner based on guidewords. However, HAZOP identifies malfunctions from the top-level functionality provided by the system, so it cannot sufficiently identify hazards during the system operation. This leads to restrictions in designing testcases, because the safety requirements are derived from only some of the hazards. This research aimed to provide a hazard identification method utilizing Use case description, which defines operation procedure of the system and HAZOP and a testcase design method based on safety requirements. We introduced a case study on Smart Key Control System in vehicles and compared with hazards identification results based on HAZOP, to demonstrate the effectiveness of this study. The result of this study could potentially reduce development cost and increase system quality by adequately identifying hazards and safety requirements and designing the related testcase.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.223-229
• /
• 2014

This study investigated the explosion characteristics of HCNG fuel using a simulation tool. The damage caused by the storage container explosion and vapor cloud explosion in a gas station was predicted. In case of an vapor cloud explosion in the HCNG station, 50~200kPa explosion pressure was predicted inside the station. When the cylinder explosion was occurred, in case of hydrogen, the measured influential distance of overpressure was 59m and radiant heat was 75m. In case of CNG, influential distance of overpressure was 89m and radiant heat was 144m would be estimated. In case of 30% HCNG that was blended with hydrogen and CNG, influential distance of overpressure was 81m and radiant heat was 130m were measured. The damage distance that explosive overpressure and radiant heat influenced CNG was seen as the highest. HCNG that was placed between CNG and hydrogen tended to be seen as more similar with CNG.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.90-97
• /
• 2019

This study is aiming to compare stair ascent transportation speed and physical burden of evacuation supporters according to the types of stair ascent transportation for vulnerable people experimentally. In this study, we measured heart rate of the supporters to indicate physical burden during the transportation. The subjects of this experiment were male students, age of 20-26. Experimental conditions were the ways of stair transportation and the weight of vulnerable people. The types of stair transportation were giving a piggyback ride and carrying a wheelchair. Each experimental trial was video-recorded for measurement of ascent speed and observing supporters movement. As a result of the experiment, as for the ascent transportation speed by piggyback ride from the first floor to the fourth floor, the average speed of the light case is 31 seconds and for the heavy case is 43 seconds. When it comes to the average speed of wheelchair transportation's average speed the light case is 1 minute and 11 seconds and the heavy case is 1 minute and 49 seconds. Therefore, it was indicated that when the weight of a vulnerable people is lighter, the transportation speed is faster. The heart rates of evacuation supporters are different depending on transportation methods or individual's condition but as repetitive transportation increases, they tend to reach the maximum heart rates.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2008

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA J-turn and Fish-hook steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes the procedure to search for other useful worst case based upon the existing worst case scenarios mentioned above and its application in simulation basis. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of either roll angle or yaw rate. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition (ex.2-inch wheel lift). Additionally, as an application, the worst case steering maneuver is acquired for the vehicle to operate with a simple ESP system. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle system both with an intelligent safety control system and without it.

• Journal of Ship and Ocean Technology
• /
• v.4 no.4
• /
• pp.1-18
• /
• 2000

The paper describes a formalisation of a Design for Safety methodology in an integrated envi-ronment, outlines early developments of a software tool, and presents the results of an appli-cation of the methodology to a case study. The approach adopted attempts link safety per-formance prediction through the utilisation of appropriate technical tools, safety assessment deriving from risk-based methodologies and disparate design activities and issues. Black-board systems have been utilised as the platform in the development of the integrated design environment, allowing safety assessment to become an integral part of the design process. Finally, the case study addresses the application of the developed methodology to three dif-ferent arrangements of a conventional passenger Ro-Ro vessel, with the aim to demonstrate the validity of the process and methodology adopted. The findings are presented and dis-cussed, and recommendations given for the way forward.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.55-62
• /
• 2008

This is to prevent accidents that can be caused during the process of hospital logistics and accidents in relation to the traceability of medical wastes. And this is also to set up the logistic management system of medical wastes is hospital where the safety of patients shall to regard as the first priority. through these case studies effective operating plans shall be provided.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.85-95
• /
• 2007

It compared subcontractor with contractor that are wages, the labor hour and labor condition of the work environment back are inferior relative. The subcontractor which basically the contract workers evade the dangerous process or the difficult work, the dirty work back what is called 3D the case which does to keep a business is many. so With life it will be threatened consequent health directly. The possibility where the subcontractor will be exposed to danger work came to be high. Together the reason of subcontract at managing the big business the case which becomes accomplished in objective, about lower the immediacy safety&health problem, subcontractor assigned workers is the actual condition only it could not be deteriorated more in public finance of the supply and enterprise and technical ability insufficiency. Consequently it prevents the subcontract which danger work is insensitive from this research and immediacy of the subcontract workers who is weak hygiene circumstance complement the plan it will be able to secure the immediacy safety&health subcontract workers, substantially to prepare in the hazard subcontract proprietor.