• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.215-229
• /
• 2023

Objectives: To validate the effectiveness of a real-time chemical exposure monitoring system developed by KOSHA (Korea Occupational Safety and Health Agency), we applied the system to a workplace in the electronics industry for 153 days. Methods: The monitoring system consisted of a PID chemical sensor, a LTE communication equipment, and a web-based platform. To monitor chemical exposure, four sets of sensors were placed in two manufacturing tasks - inspection and jig cleaning - which used TCE as a degreasing agent. We reviewed previous reports of work environment measurements and conducted a new work environment measurement on one day during the period. The PID sensor systems detected the chemical exposure levels in the workplace every second and transmitted it to the platform. Daily average and maximum chemical exposure levels were also recorded. Results: We compared the results from the real-time monitoring system and the work environment measurement by traditional methods. Generally, the data from the real-time monitoring system showed a higher level because the sensors were closer to the chemical source. We found that 28% of jig cleaning task data exceeded the STEL. Peak exposure levels of sensor data were useful for understanding the characteristics of the task's chemical use. Limitations and implications were reviewed for the adoption of the system for preventing poisoning caused by chemical substances. Conclusions: We found that the real-time chemical exposure monitoring system was an efficient tool for preventing occupational diseases caused by chemical exposure, such as acute poisoning. Further research is needed to improve the reliability and applicability of the system. We also believe that forming a social consensus around the system is essential.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.282-294
• /
• 2010

The purpose of SAICM (Strategic Approach to International Chemicals Management) is to minimize the health and environmental hazards from the production and the consumption of chemicals by improving the chemicals management capability of developing countries and implementing a system of the risk assessment and the management based on the precautionary principle until 2020. To achieve this purpose, the UN has prescribed the principles, objectives and establishment of an action plan for the chemicals management strategy which must be carried out at international, local, and national levels, and requested the implementation of the Global Plan of Action (GPA) comprising of 273 recommendations in 36 work areas. SAICM is currently based on voluntary participation, but is expected to become the basic framework of international order in relation to chemicals management in the future. This study aims to analyze the practice in the occupational safety and health area relating to implement 273 recommendations of the GPA, and propose complementary measures for the system in order to provide political advices for establishing future plans to manage industrial chemicals. Twenty three areas of total 36 work areas and 161 items of 273 recommendations have relevance to occupational safety and health areas. We have found that, as a national implementation level, 157 of 161 industrial safety and health items are being implemented at a satisfactory level in regard to the implementation of the GPA, while 4 items, including the ratification of the ILO Conventions 170, 174, 184, and support for GHS (Globally Harmonized System of Classification and Labeling of chemicals) implementation of developing countries, require additional complementary measures for the system and operation.

• The Journal of Korean Society for School & Community Health Education
• /
• v.8 no.1
• /
• pp.69-77
• /
• 2007

Background & Objectives: International radiation protection committee recognized the importance of radiation protection from medical practices because the exposure to the radiation in medical practice is higher than any other exposure. The factors on knowledge, attitude and practice of radiation safety of the medical workers engaged in radiation were analyzed in order to improve radiation safety technology. Method: Questionnaires were used for 1200 radiation workers in medical institution from July 23 through September 4 and collected for analysis. Results: Different level of safety measures were practiced by age, marital status, career, and medical facility. The difference was statistically significant. Higher levels of safety measures were practiced in the age group of 50s and married persons. The workers who have more than 20 years experience have higher level of safety measures. The workers of health centers have higher level of safety measures to compare with other workers. The factors which give more concerns on safety practice were self efficacy, practice and knowledge in order. Conclusion: Safety conscious operators should get additional education program to maintain higher level of safety. The operators who do not have much safety concern should be intensive training program for self efficacy and safety.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.13-21
• /
• 2021

Objectives: The purpose of this study was to evaluate the exposures of cashiers who work at expressway tollbooths. Methods: We measured temperature(temp.), relative humidity(RH), and contaminants with direct reading instruments at ten expressway toll gate in September 2015. Elemental carbon was collected on the quartz filters and analyzed with an OCEC analyzer. Results: The average levels for temp., RH, carbon monoxide, carbon dioxide, dust(PM10), and black carbon were respectively 24.6~27.8℃, 32.3~65.3%, 0.5~1.2 ppm, 456~559 ppm, 12~111 ㎍/㎥, and 3.1~10.1 ㎍/㎥ at each tollbooth. The concentrations of elemental carbon within the tollbooth(1.8~7.2 ㎍/㎥) were lower than outdoors(2.5~10.0 ㎍/㎥), but exhibited a high correlation(r2=0.855). The exposure levels for carbon monoxide, black carbon, and elemental carbon in the tollbooths were significantly higher than the offices. The concentrations of black carbon and elemental carbon showed a high correlation(r2=0.756). Conclusions: The levels of contaminants were below the occupational exposure limits in the expressway tollbooth. There were ventilation and air conditioning systems in the booths, but it is necessary to maintain and use the systems properly.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2018

Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.1
• /
• pp.8-19
• /
• 2020

Purpose: To identify the importance and performance levels of health management duties, work-related and general attributes of health managers in medical institutions and analyze their impact on the performance of managing health-care related tasks. Methods: This research identified the performance levels of 150 health managers who have been executing industrial health-related duties for more than six months as nurses in medical institutions with more than 30 hospital beds. The variables which affect their performances were then analyzed. Results: The average importance of health care duties was 8.1 out of 10 and 5.5 for performance levels. Multi-regression analysis on the variables affecting performance levels of health managers in medical institutions showed that health managers exhibit higher numbers under the following conditions: over 300 full-time employees, more than 1 year but less than 3 years of experience, positions above section chief level, affiliation to the safety and health department, and high perception of duty importance. Conclusion: Improved cognizance of health manager importance should occur initially; then, health-care center setup, assigning of exclusive occupational health managers, and organizational efforts to improve the working environment in tandem with the provision of educational training programs to improve work quality are necessary.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.266-272
• /
• 2013

Objectives: This study aimed to evaluate the effects of low-level exposure to toluene on T lymphocytes subpopulations.s. Methods: The study lasted from April to October 2010. The subjects were 390 male workers, among whom 137 were chronically exposed to toluene in video-tape manufacturing factories and 253 were controls had never been occupationally exposed to hazardous chemicals. The subpoupulations of CD4+, CD8+, CD16+ (natural killer cells) and total (CD3+) T lymphocytes were examined by two-color staining using monoclonal antibodies. The general and job characteristics of subjects were assessed through a self-administered questionnaire. Results: There was no significant difference in general and job characteristics between both groups. No significant difference in lipid peroxide level was observed between the control and exposed workers, but the concentration of hydrogen peroxide was significantly higher in the exposed workers. The numbers of CD16+ T lymphocytes in controls were significantly higher than those in exposed workers, but no significant differences were found in CD4+, CD8+ and CD3+ T lymphocytes. Hydrogen peroxide levels showed a significantly negative correlation with CD8+ (r = -0.29, p < 0.01), CD16+ (r = -0.56, p < 0.01) and CD3+(r = -0.22. p < 0.01), and toluene levels was significantly negative correlated with CD3+ (r = -0.29, p < 0.05). Conclusions: Our results suggest that chronic low-level exposure to toluene affects cell-mediated immunity and the effects might mediate through ROSs (Reactive Oxygen Species) such as hydrogen peroxide.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.272-280
• /
• 2014

Objectives: The purpose of this study was to evaluate the characteristics of worker exposure to hazardous chemical substances and propose the direction of work environment management for protecting worker's health in the semiconductor assembly process. Methods: Four assembly lines at two semiconductor manufacturing companies were selected for this study. We investigated the types of chemicals that were used and generated during the assembly process, and evaluated the workers' exposure levels to hazardous chemicals such as benzene and formaldehyde and the current work environment management in the semiconductor assembly process. Results: Most of the chemicals used at the assembly process are complex mixtures with high molecular weight such as adhesives and epoxy molding compounds(EMCs). These complex mixtures are stable when they are used at room temperature. However workers can be exposed to volatile organic compounds(VOCs) such as benzene and formaldehyde when they are used at high temperature over $100^{\circ}C$. The concentration levels of benzene and formaldehyde in chip molding process were higher than other processes. The reason was that by-products were generated during the mold process due to thermal decomposition of EMC and machine cleaner at the process temperature($180^{\circ}C$). Conclusions: Most of the employees working at semiconductor assembly process are exposed directly or indirectly to various chemicals. Although the concentration levels are very lower than occupational exposure limits, workers can be exposed to carcinogens such as benzene and formaldehyde. Therefore, workers employed in the semiconductor assembly process should be informed of these exposure characteristics.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.321-327
• /
• 2011

Objectives: To find out from an analysis of empirical data the levels of influence, which a labor union (LU) and Occupational Safety and Health Committee (OSHC) have in reducing the occupational injury and illness rate (OIIR) through their accident prevention activities in manufacturing industries with five or more employees. Methods: The empirical data used in this study are the Occupational Safety and Health Tendency survey data, Occupational Accident Compensation data and labor productivity and sales data for the years 2003 to 2007. By matching these three sources of data, a final data set (n = 280) was developed and analyzed using SPSS version 18 (SPSS Inc., Chicago, IL, USA). Results: It was found that a workplace with a LU has a lower OIIR than one without a LU. In manufacturing industries with five or more employees in 2007, the OIIR of the workplaces without a LU was 0.87%, while that of workplaces with a LU was much lower at 0.45%. In addition, workplaces with an established OSHC had a lower OIIR than those without an OSHC. Conclusion: It was found that the OIIR of workplaces with a LU is lower than those without a LU. Moreover, those with the OSHC usually had a lower OIIR than those without. The workplace OIIR may have an impact on management performance because the rate is negatively correlated with labor productivity and sales. In the long run, the OIIR of workplaces will be reduced when workers and employers join forces and recognize that the safety and health activities of the workplace are necessary, not only for securing the health rights of the workers, but also for raising labor productivity.

• Safety and Health at Work
• /
• v.13 no.4
• /
• pp.387-393
• /
• 2022

Background: Problem drinking is a perennial concern in the US fire service. A large literature has documented the importance of addressing alcohol norms in intervention research. The purpose of this study was to explore alcohol norms in a national cohort of firefighters (FFs) to inform intervention development in this occupational group. Methods: Data were from a national online survey of career and volunteer FFs (N = 674). Participants were recruited through national fire service listservs and a database of FFs who had agreed to be contacted for research. Results: When asked about "acceptable" levels of alcohol consumption, FFs on average suggested levels which exceeded public health guidelines. Further, approximately half of career and volunteer FFs believed that, at least under some circumstances, drinking until intoxicated was normative. When asked how long should elapse between a FFs last drink and reporting for duty, the average suggested lag was 11.2 hours (sd = 4.6). However, among male volunteer FFs who reported heavy drinking, the average was 6.68 hours (sd = 4.77). Conclusions: Given the high prevalence of heavy and binge drinking in the fire service, it is not surprising that the alcohol norms found in this study were consistent with a culture of drinking. Participants' reports of alcohol use among their peers were consistent with the actual prevalence of problem drinking. Thus, education and prevention efforts in this occupation should focus on changing norms about alcohol use, including linking heavy drinking to other health and safety issues they face.