• 대한안전경영과학회지
• /
• 제26권3호
• /
• pp.19-27
• /
• 2024

This study analyzes the impact of occupational health risk assessments on the safety and health levels and the safety behaviors of workers in manufacturing workplaces. An online survey was conducted among 3,172 companies, yielding 637 responses. The statistical analysis on the collected responses revealed three key findings. First, the safety and health levels (safety importance, safety comprehension, safety awareness) positively influence the outcomes of occupational health risk assessments(safety practice, safety management, safety improvement) and safety behaviors (activity change, safety check). Second, the effectiveness of occupational health risk assessments has a positive impact on safety behaviors. Lastly, the effectiveness of occupational health risk assessments partially mediate the relationship between safety and health levels and safety behaviors. These findings are expected to contribute to the promotion of risk assessments in the field of industrial health and to enhancing safety performance by improving workplace safety, health levels, and safety behavior.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.365-374
• /
• 2011

Objectives: This study was designed to investigate whether long-term, low-level exposure to monocyclic aromatic hydrocarbons (MAHs) induced insulin resistance. Methods: The subjects were 110 male workers who were occupationally exposed to styrene, toluene, and xylene. One hundred and ten age-matched male workers who had never been occupationally exposed to organic solvents were selected as a control group. Cytokines, which have played a key role in the pathogenesis of insulin resistance, and oxidative stress indices were measured. Assessment of exposure to MAHs was performed by measuring their ambient levels and their urinary metabolites in exposed workers, and the resulting parameters between the exposed group and non-exposed control groups were compared. Results: There was no significant difference in general characteristics and anthropometric parameters between the two groups; however, total cholesterol, fasting glucose, fasting insulin, and homeostasis model assessment of insulin resistance levels were significantly higher in the exposed group. Phenylglyoxylic acid levels showed significant association with tumor necrosis factor-${\alpha}$, total oxidative status, and oxidative stress index via multiple linear regression analysis. Further, there was a negative correlation between methylhippuric acid levels and total anti-oxidative capacity, and there was a significant relationship between MAHs exposure and fasting glucose levels, as found by multiple logistic regression analysis (odds ratio = 3.95, 95% confidence interval = 1.074-14.530). Conclusion: This study indicated that MAHs increase fasting glucose level and insulin resistance. Furthermore, these results suggested that absorbing the organic solvent itself and active metabolic intermediates can increase oxidative stress and cytokine levels, resulting in the changes in glucose metabolism and the induction of insulin resistance.

• Safety and Health at Work
• /
• 제3권3호
• /
• pp.216-223
• /
• 2012

Objectives: The objectives of this study were to determine the lead levels in blood samples from nielloware workers, to determine airborne lead levels, to describe the workers' hygiene behaviors, and to ascertain and describe any correlations between lead levels in blood samples and lead levels in airborne samples. Methods: Blood samples and airborne samples from 45 nielloware workers were collected from nielloware workplaces in Nakhon Sri Thammarat Province, Thailand. Lead levels were determined by flame atomic absorption spectrometry (FAAS), at a wavelength of 283.3 nm. FAAS was used especially adequate for metals at relatively high concentration levels. Results: The geometric mean of the 45 airborne lead levels was 81.14 ${\mu}g/m^3$ (range 9.0-677.2 ${\mu}g/m^3$). The geometric mean blood lead level of the 45 workers was 16.25 ${\mu}g/dL$ (range 4.59-39.33 ${\mu}g/dL$). No worker had a blood lead level > 60 ${\mu}g/dL$. A statistically significantly positive correlation was found between airborne lead level and blood lead levels (r = 0.747, p < 0.01). It was observed that personal hygiene was poor; workers smoked and did not wash their hands before drinking or eating. It was concluded that these behaviors had a significant correlation with blood lead levels (p < 0.001). Conclusion: Improvements in working conditions and occupational health education are required due to the correlation found between blood leads and airborne lead levels.

• Safety and Health at Work
• /
• 제5권3호
• /
• pp.118-124
• /
• 2014

Background: Satisfactory completion of mine safety training is a prerequisite for being hired and for continued employment in the coal industry. Although training includes content to develop skills in a variety of mineworker competencies, research and recommendations continue to specify that specific limitations in the self-escape portion of training still exist and that mineworkers need to be better prepared to respond to emergencies that could occur in their mine. Ecological models are often used to inform the development of health promotion programs but have not been widely applied to occupational health and safety training programs. Methods: Nine mine safety trainers participated in in-depth semi-structured interviews. A theoretical analysis of the interviews was completed via an ecological lens. Each level of the social ecological model was used to examine factors that could be addressed both during and after mine safety training. Results: The analysis suggests that problems surrounding communication and collaboration, leadership development, and responsibility and accountability at different levels within the mining industry contribute to deficiencies in mineworkers' mastery and maintenance of skills. Conclusion: This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels-individual, interpersonal, organizational, and community-to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

• Safety and Health at Work
• /
• 제6권2호
• /
• pp.143-145
• /
• 2015

Three occupational safety and health (OSH) activities, one international and two national workshops, were documented as part of OSH activities conducted under the International Labor Organization/Korea Partnership Program in the year 2011-2012. This study aimed to provide information on what the three OSH activities were implemented and how they contributed to the improvement of OSH in Asian countries. The international workshop was useful for the participants to understand a variety of information on OSH as well as participatory action-oriented training (PAOT) approaches at the regional and global levels. The two national workshops were practical for participants to strengthen their knowledge and skills on the PAOT at the enterprise and national levels. The study shows that the three OSH activities contributed to the understanding of the participants on OSH and PAOT, and that the activities promoted the improvement of OSH across countries in Asia.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.940-948
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 948 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to 1.7~2.8 $m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were 7.1~10.8 $m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were 3.3~11.1 $m/s^2$. Workers using a impact wrench were exposed to 1.5~1.6 $m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplace to control vibration was not much different from the past because there are no vibration exposure limit.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.336-347
• /
• 2011

Objectives: In Korea, an average of 258 workers claim compensation for their noise-induced hearing loss (NIHL) on an annual basis. Indeed, hearing disorder ranks first in the number of diagnoses made by occupational medical check-ups. Against this backdrop, this study analyzed the impact of 19 types of noise-generating machines and equipment on the sound pressure levels in workplaces and NIHL occurrence based on a 2009 national survey on work environments. Methods: Through this analysis, a series of statistical models were built to determine posterior probabilities for each worksite with an aim to present risk ratings for noise levels at work. Results: It was found that air compressors and grinding machines came in first and second, respectively in the number of installed noise-generating machines and equipment. However, there was no direct relationship between workplace noise and NIHL among workers since noise-control equipment and protective gear had been in place. By building a logistic regression model and neural network, statistical models were set to identify the influence of the noise-generating machines and equipment on workplace noise levels and NIHL occurrence. Conclusion: This study offered NIHL prevention measures which are fit for the worksites in each risk grade.

• 한국직업건강간호학회지
• /
• 제18권1호
• /
• pp.44-54
• /
• 2009

Purpose: The aim of this study was to examine the effects of obesity on the physiological levels of adiponectin, leptin and components of metabolic syndrome (MS) in male workers, aged 30-40 years. Methods: Body mass index (BMI) was measured with Anthropometric equipment. Blood pressure and serum parameters were measured with an automatic digital sphygmomanometer and autochemical analyzer, respectively. Adiponectin and leptin were analysed by ELISA kits and MS was defined based on the NCEP-ATP III. Results: Body fat mass of waist and hip, systolic and diastolic blood pressure were significantly higher, as expected, in the BMI>25kg/$m^2$ in comparison with the $BMI{\leq}25kg/m^2$. While fasting glucose, insulin, HOMA-IR and leptin in the BMI>25kg/$m^2$ were also significantly higher compared with $BMI{\leq}25kg/m^2$, HDL-cholesterol and adiponectin were significantly higher in $BMI{\leq}25kg/m^2$. On multiple logistic regression analysis for the components of MS, exercise, adiponectin and leptin were an only independent factor for MS in non-obese male workers($BMI{\leq}25kg/m^2$) after adjustment for age, cigarette smoking and drinking habits. Conclusion: These results suggested that the obesity in men was associated with physiological levels of adiponectin and leptin contributing to feedback control of MS and that dysfunction and/or declination in feedback control system associated with changes in physiological levels of neurptrophics: adiponectin and leptin might ultimately induce MS.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.109-117
• /
• 2020

Background: Ammonia and hydrogen sulfide are harmful gases generated during aerobic/anaerobic bacterial decomposition of livestock manure. We evaluated ammonia and hydrogen sulfide concentrations generated from workplaces at livestock farms and determined environmental factors influencing the gas concentrations. Methods: Five commercial swine farms and five poultry farms were selected for monitoring. Real-time monitors were used to measure the ammonia and hydrogen sulfide concentrations and environmental conditions during the manure-handling processes. Monitoring was conducted in the manure storage facility and composting facility. Information on the farm conditions was also collected through interview and walk-through survey. Results: The ammonia concentrations were significantly higher at the swine composting facilities (9.5-43.2 ppm) than at other manure-handling facilities at the swine and poultry farms, and high concentrations of hydrogen sulfide were identified during the manure agitation and mixing process at the swine manure storage facilities (6.9-19.5 ppm). At the poultry manure-handling facilities, the ammonia concentration was higher during the manure-handling processes (2.6-57.9 ppm), and very low hydrogen sulfide concentrations (0-3.4 ppm) were detected. The air temperature and relative humidity, volume of the facility, duration of manure storage, and the number of animals influenced the gas concentrations. Conclusion: A high level of hazardous gases was generated during manure handling, and some levels increased up to risk levels that can threaten workers' health and safety. Some of the farm operational factors were also found to influence the gas levels. By controlling and improving these factors, it would be possible to protect workers' safety and health from occupational risks.

• Safety and Health at Work
• /
• 제5권3호
• /
• pp.125-130
• /
• 2014

Background: Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Methods: Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined for the desired framework, and then, by reviewing literature, factors affecting these main elements were determined. The relative importance of each element and its related factors was calculated at organizational and project levels. The provided framework was then implemented in three construction companies, and results were compared together. Results: The results of the study show that the relative importance of the main elements and their related factors differ between organizational and project levels: leadership and commitment are the most important elements at the organization level, whereas risk assessment and management are most important at the project level. Conclusion: The present study demonstrated that the framework is easy to administer, and by interpreting the results, the main factors leading to the present condition of companies can be determined.