• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.373-381
• /
• 2012

Using Radioiodine therapy of thyroid cancer in the past have been used for decades as many look forward to continuing treatment be used, and the current outlook of in korea 2010 based on the number of Iodine therapy room is operated by 124, but still is lacking. So many hospitals opened their therapy room, but importantly, increasing number of treatment rather than therapy room current treatment is that it must be preceded by the proper administration of the. Therefore therapy room expansion, discussions about before now being applied therapy room safety management standards, and a part university hospital based safety management standards by examining how well kept and that the therapy room to the use of the overall safety management research on the actual condition were discussed.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.55-64
• /
• 2001

The main objective of this research is to develop a model to select the optimal input service level for a distribution center-multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service levels for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• Architectural research
• /
• v.13 no.2
• /
• pp.31-40
• /
• 2011

Asbestos have been used around the world by physical and chemical characteristics that are a reliable and cost-effective. But asbestos, once called the miracle of mineral, is now a quiet time bomb. Asbestos hazards have been studied and the government has pursued 'Comprehensive Measures for Asbestos Management' jointly with related departments. As a part of plan, Ministry of Environment is to introduce legislation 'Asbestos Safety Management Act' through Environment Announcement No. 2010-108. The same Act. 24 shows as follows. Minister of Environment or governor should do survey on the actual condition targeting rural buildings with slates and partly or fully fund to dissolve, remove asbestos slate which was used in each building. However, the local survey was only conducted by each municipality regionally. And there is no actual condition data by area, application and year, and there was no data on disposal costs concerning asbestos slate buildings In this study, discharge of asbestos slate was calculated per unit area and formula was developed with regression analysis. In addition, Demolition, dismantling, disposal costs were computed via a phone survey to disposal companies and then this study proposed standards for this.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.440-446
• /
• 2005

The truck frame of railway vehicle is important structure supporting the various loadings during running on the railway. The verification of sufficient strength on truck frame is essential in case of EMU carrying many people. To verify the safety of truck frame, the actual loading conditions should be considered ast design stage. This paper is describing that the development procedure of truck frame and bolster changed from existing casting frame to new welded frame for New-York EMU, also introducing the design regulations for new welded truck frame. Additionally the dynamic accelerations on the truck were measured to insure the actual loadings on service running condition, and the procedure and results of this test are described in this paper.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.126-127
• /
• 2018

Rebar work is important in terms of cost and process of reinforced concrete construction along with formwork and concrete construction, and the quality of reinforced concrete construction has a great influence on the safety and durability of the structure. Therefore it is important to thoroughly inspect the steel reinforcement after casting the concrete because it is difficult to confirm the actual condition of the reinforcement. The purpose of this study is to develop an augmented reality system to visualize the records of bar placing work, which is increasingly utilized in the construction field. In order to improve maintenance of reinforced concrete, this study suggests a plan to effectively manage the drawing information including the structural drawing, the placing drawing, and the photographed image at the construction and inspection stage, and develop a system that utilizes augmented reality technology that can display the state of the inside of a concrete structure by superimposing it on actual environment.

• Earthquakes and Structures
• /
• v.12 no.3
• /
• pp.349-357
• /
• 2017

The design of reinforced concrete structures strongly depends on the value of the compression concrete strength used for the structural components. Given the uncertainties involved on the materials quality provided by concrete manufacturers, in the construction stage, these components may be either over or under-reinforced respect to the nominal condition. If the structure is under reinforced, and the deficit on safety level is not as large to require the structure demolition, someone should assume the consequences, and pay for the under standard condition by means of a penalty. If the structure is over reinforced, and other failure modes are not induced, the builder may receive a bonus, as a consequence of the higher, although unrequested, building resistance. The change on the building safety level is even more critical when the structure is under a seismic environment. In this research, a reliability-based criteria, including the consideration of expected losses, is proposed for bonification/penalization, when there are moderated differences between the supplied and specified reinforced concrete strength for the buildings. The formulation is applied to two hypothetical, with regular structural type, 3 and 10 levels reinforced concrete buildings, located on the soft soil zone of Mexico City. They were designed under the current Mexican code regulations, and their responses for typical spectral pseudoaccelerations, combined with their respective occurrence probabilities, are used to calculate the building failure probability. The results are aimed at providing objective basis to start a negotiation towards a satisfactory agreement between the involved parts. The main contribution resides on the explicit consideration of potential losses, including the building and contents losses and the business interruption due to the reconstruction period.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.154-162
• /
• 2015

As there is no case study with current status, measurements or description on the state of actual site of rural area only, the delivery of actual conditions about such an area is significantly limited. The purpose of this study is to pinpoint issues with housing conditions of low-income family with disabled members in the rural area. For such a purpose, 25 households of disabled people have been visited for interview, on-site research and survey, of which results are summed up in this paper as following: First, average monthly income of such family turned out to be KRW 480,000, most of which is from the government subsidy. High ratio of such families has resided in a house with average size of approximately 56m2 for about 24 years. Secondly the most needed maintenance work with top priority was for the toilet, and many of the interviewees expressed their discomfort about small size of their bathrooms and inconvenient facilities therein. Thirdly, most of such houses had too high thresholds that posed danger and inconvenience. Such thresholds had average height of 13cm, which can be considered as completely inconsiderate of disabled users. Fourth issue was that these people needed safety handle that will enable them to stand up or to be in the standing posture in the living room and bedroom where they spend most of their time. Fifthly, they wanted finishing materials with waterproof functionality as well as replacement of finishing materials and wallpaper which were too old and caused hygiene issues. As these issues represent, current housing for disabled people in the rural area turned out to be poor and risky space rather than the place where difficulty of individual situation can be resolved or their disability can be complemented. Thus it can be determined that now is the time to arrange the solutions for such housing difficulties and to establish customized housing plan to ensure safety and convenience.