• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.251-252
• /
• 2008

축전지는 비상용 전원으로 사회 많은 분야에서 다양하게 사용되며, 유사시 예비전원으로 그 중요성이 부각되고 있다. 이러한 경우에 사용가능한 축전지를 선별하고, 그 상태를 체크하는 것은 무엇보다도 중요하다. 본 논문에서는 납축전지의 건전상태 진단을 위해 현장실태조사 및 축전지 진단장비 3종을 통하여 현장실측을 실시하였다. 현장실태 조사결과 납축전지의 유지관리가 미흡함을 확인 할 수 있었으며 또한, 축전지 진단장비 3종을 이용하여 축전지의 임피던스 및 컨덕턴스등의 비교측정결과 사용기간이 오래된 축전지일수록 축전지간의 임피던스 및 컨덕턴스의 편차가 큰 것을 알 수 있었으며 또한 사용기간이 같은 축전지일지라도 그의 설치환경에 따라 축전지간의 임피던스 및 컨덕턴스 편차가 다르게 발생됨을 알 수 있었다.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.99-105
• /
• 2010

Product Liability is concerned with liability of a product itself. But, viewing from the management standpoint, Product Liability may have more significant influence on additional sales of the product after it has been supplied into the market. With regard to this, this study tried to make the following: First, this study examined the concept of 'Product Liability and enterprises' management attitude toward Product Liability. Secondly, through the case-analyses of Product Liability, a correlation study had been attempted to know the influence of corporate cultures and product safety activities on business management. Thirdly, this study tried to find the directions of Product Liability at the level of total management strategy.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.91-92
• /
• 2006

The increased use of underground power distribution as opposed to overhead lines contributes to the aesthetics of the downtown areas. But there is an inherent risk of accidental electrocution should there be damage to the insulation of the cable because of heavy rain. Should a pedestrian make contact with this cable indirectly, via a man hole cover, electrocution could result. In this paper, we analyse weaknesses in this low-voltage manhole and propose improvements.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1005-1011
• /
• 2007

The brake system of train must posses the large braking effort in order to stop the train safely within the limited traveling distance. But, the excessive braking effort has been deteriorated the ride comfort due to high level of deceleration and jerk, and sometimes occurred the skid, because the applied braking force exceeds the allowable adhesive force. This skid causes not only to increase the stopping distance but also to deteriorate the safety of train and damage the rail surface by wheel flat. In the present paper, the braking force for disc brake of Korea High Speed Train (HSR350x) was measured through on-line test and the adhesion force was estimated by using the analytic model in the skid condition. Also, we have discussed the relationship between the actual disc brake force and the adhesion force in real skid condition.

• Journal of Power System Engineering
• /
• v.12 no.5
• /
• pp.65-70
• /
• 2008

The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the turbine major valves relating to safety for turbine operating and prevention of turbine trouble at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized electro-hydraulic control oil flowed through turbine electro-hydraulic controller oil check valve and turbine power/trip fluid solenoid valve in the condition of actual turbine operating. The acoustic emission method was applied to the valves at the site, and the background noise was measured far the abnormal plant condition. To judge for the leak existence ell the object valves, voltage analysis and frequency analysis of acoustic signal emitted from infernal leak in the valve operating condition are performed. It was conformed that acoustic emission method could monitor for valve internal leak to high sensitivity.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.143-152
• /
• 2017

In order to ensure the right of self-determination of women, most of countries allow women to buy post-coital contraceptive pills or general medical supplies with ease. This study aims to analyze how ordinary people recognize and respond to post-coital contraceptive pills through collecting atypical data by using the keyword 'Contraception', rather than using the existing actual condition survey, such as questionnaire and interview, so that the results have been presented, which may be referred to for establishment of policies.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.61-67
• /
• 2016

This study is the basic direction of the BIM bases ubiquitous safety monitoring. First, studied the background and the purpose of the study, and it's scope and methods. Second, described the concept of BIM and investigated how BIM bases proceed through actual condition of ubiquitous safety monitoring. Third, identified BIM bases ubiquitous safety monitoring which can be applied consistently, Forth, DCP bases ubiquitous safety monitoring which can be applied consistently, Also, Finally, suggested the conclusion and sat the future research by analyzing the study results. It is expected to be worked out a way as a new model ubiquitous safety monitoring which will be combined with a ubiquitous DCP.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.22-32
• /
• 2022

The domestic smart factory is being built and spread rapidly, mainly by mid-sized companies and large enterprises according to the government's active introduction and support policy. But these factories only promote production system and efficiency, so harmfulness and risk factors are not considered. Therefore, to derive harmful risk factors in terms of industrial safety for 12,983 government-supported smart factory workplaces from 2014 to 2019, industrial accident status analysis compared workplaces with automation facilities and government-supported workplaces with automation facilities. Also, to reduce risks associated with domestic smart factory processes, twenty government-supported workplaces with automation facilities underwent analysis, evaluating risks through a status survey using the process evaluation table. In addition, the status survey considered region, size, industry, construction level, and accident rate; the difference in risk according to the structure of the process was confirmed. Based on the smart factory process evaluation results, statistical analysis confirmed that serial, parallel, and hybrid structures pose different risk levels and that the risks of mixed structures are greater. Finally, safety control system application was presented for risk assessment and reduction in the smart factory process, reflecting the results of disaster analysis and actual condition investigation.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.104-113
• /
• 2024

Unlike in general manufacturing process, safety management in laboratory-based research area is complicated because the latter generally involves trying untested methods or handling unusual substances in small amounts. Laboratory accidents in South Korea have recently shown an increasing trend. Unfortunately, statistics on such accidents are not officially published by any domestic public agencies. In this study, multivariate analysis was performed on the relationships between variables to develop effective strategies for preventing laboratory accidents. A Cross-Tabulation Analysis of accident-related factors in 179 accident cases revealed that the laboratory type, accident type, and unsafe-act type are all statistically significant, whereas the unsafe condition and management factors differ with the statistical criteria. Furthermore, the results of a Multiple-Correspondence Analysis showed that accidents can be divided largely into three groups having different accident causes and injury types; this confirms the necessity of different strategies to prevent accidents of each type. The findings also reveal differences between the distribution of accident types mentioned in the accident case collection books and actual reported cases. This suggests that an official statistical system administered by a public institution would be necessary for effective prevention of laboratory accidents.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2016

Rubber parts are widely used in many applications such as dampers, shock absorbers, and seals used in railway and automotive industries. Much research has thus far been conducted on property estimation and life prediction of rubber parts. To predict the service life of rubber parts at room temperature, most prior work adopts the well-known Arrhenius model that needs the accelerated life test in high-temperature conditions. However, they may not reflect the actual conditions of use that rubber parts are usually used under a specific strain condition during long period of time. In this context, we propose a method for the life prediction of rubber parts in actual conditions of use. The proposed method is based on the accelerated life test using stress relaxation during which three relatively high elongation percentages (100%, 200%, and 300%) are applied to the rubber specimens. Rubber specimens were prepared in accordance with KS M 6518 standard and three stress relaxation testers were fabricated for actual experiments. Finally, a inverse power model for life prediction was derived from experimental results. The predicted life was compared with the actual test life for validation.