• 한국안전학회지
• /
• 제32권1호
• /
• pp.115-120
• /
• 2017

The aim of this study is to develop construction safety and health management cost prediction model using support vector machine (SVM). To this end, theoretical concept of SVM is investigated to formulate the cost prediction model. Input and output variables have been selected by analyzing the balancing accounts for the completed construction project. In order to train and validate the proposed prediction model, 150 data sets have been gathered from field. Effects of SVM parameters on prediction accuracy are analyzed and from which the optimal parameter values have been determined. The prediction performance tests are conducted to confirm the applicability of the proposed model. Based on the results, it is concluded that the proposed SVM model can effectively be used to predict the construction safety and health management cost.

• 한국음향학회지
• /
• 제23권4호
• /
• pp.333-339
• /
• 2004

본 논문에서는 벡터 양자화기와 피라미드 벡터 양자화기를 직렬로 결합하여 16차 벡터 소스에 대한 vector quantizer-pyramid vector quantizer (VQ-PVQ)를 개발하였으며, 예측 구조와 세이프티-넷 (safety-net) 개념을 결합시켜 광대역 음성 부호화기용 LPC 계수 양자화 기를 설계하였다. 본 양자화기의 성능은 AMR-WB(ITRT-T G.722.2)의 LPC양자화기 성능과 비교하였는데, 스펙트럼 왜곡 및 메모리 요구량에서 상당한 이득을 얻었다.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.88-95
• /
• 2001

Stator core loss has significant adverse effects when an induction motor is controlled by the conventional vector control method. Therefore, taking core toss into account should make it possible to control the torque very precisely. This paper proposes a speed sensorless vector control method for an induction motor at optimum efficiency and high response taking core loss account. The proposed vector control system consists of a speed adaptive rotor flux observer which takes core loss into account and employs a direct vector control which compensates for the influence of core loss. Also, in this paper, a vector controlled induction motor with a deadbeat rotor flux controller is developed. The method ensures optimum efficiency in the steady state without degradation of the dynamic response. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.325-326
• /
• 2013

• 한국통신학회논문지
• /
• 제34권12C호
• /
• pp.1123-1130
• /
• 2009

네트워크 분야와 멀티미디어 기술의 발전에 따라 실시간 처리에 대한 연구가 각광을 받고 있다. 또한, 많은 용용 분야에서 신뢰도가 높은 실시간 통신에 대한 필요성이 대두되고 있다. 이 논문에서는 큐브 구조를 갖는 다중 컴퓨터에 대한 실시간 통신 알고리즘을 벡터를 이용하여 구현하려고 한다. 큐브 형태의 n 차원 다중 컴퓨터에서 n 개의 안전 벡터는 이웃한 노드들의 결함의 분포와 근사적인 결함의 척도와 관련되어 있다. 이 연구에서는 실시간 채널에서 서로 설정하는 다른 우회 경로를 찾는 알고리즘을 개발한다. 개발한 알고리즘과 기존의 방법들을 비교하여 성능을 분석한다. 시뮬레이션 결과는 이미 제안된 알고리즘과 비교하여 보다 효율적임을 보이고 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.169-170
• /
• 2008

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.199-210
• /
• 2005

Customer segmentation prediction has attracted a lot of research interests in previous literature, and recent studies have shown that artificial neural networks (ANN) method achieved better performance than traditional statistical ones. However, ANN approaches have suffered from difficulties with generalization, producing models that can overfit the data. This paper employs a relatively new machine learning technique, support vector machines (SVM), to the customer segmentation prediction problem in an attempt to provide a model with better explanatory power. To evaluate the prediction accuracy of SVM, we compare its performance with logistic regression analysis and ANN. The experiment results with real data of insurance company show that SVM superiors to them.

• ETRI Journal
• /
• 제30권5호
• /
• pp.738-740
• /
• 2008

In this paper, block constrained trellis coded vector quantization (BC-TCVQ) is presented for quantizing the line spectrum frequency parameters of the wideband speech codec. Both a predictive structure and a safety-net concept are combined into BC-TCVQ to develop the predictive BC-TCVQ. The performance of this quantization is compared with that of the linear predictive coding vector quantizer used in the AMRWB codec, demonstrating reductions in spectral distortion.

• 한국안전학회지
• /
• 제36권1호
• /
• pp.1-8
• /
• 2021

To simulate a process model in the field of chemical engineering, it is very important to identify the physical properties of novel materials as well as existing materials. However, it is difficult to measure the physical properties throughout a set of experiments due to the potential risk and cost. To address this, this study aims to develop a property prediction model based on the group contribution method for aromatic chemical compounds including benzene rings. The benzene rings of aromatic materials have a significant impact on their physical properties. To establish the prediction model, 42 important functional groups that determine the physical properties are considered, and the total numbers of functional groups on 147 aromatic chemical compounds are counted to prepare a dataset. Support vector regression is employed to prepare a prediction model to handle sparse and high-dimensional data. To verify the efficacy of this study, the results of this study are compared with those of previous studies. Despite the different datasets in the previous studies, the comparison indicated the enhanced performance in this study. Moreover, there are few reports on predicting the physical properties of aromatic compounds. This study can provide an effective method to estimate the physical properties of unknown chemical compounds and contribute toward reducing the experimental efforts for measuring physical properties.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.178-178
• /
• 1996

Hepatitis B virus (HBV) infection is one of the serious problems in Southeast Asia including Korea because it causes chronic hepatitis, which can easily be transformed In fatal conditions such as cirrhosis and hepatoma. Even though lots of informations on structural characteristics and gene expression mechanisms have been accumulated, the mechanism for HBV-induced hepatocellular injury which is believed to be the consequences of the immunological response is not well understood. In order tn perform immunopathological studies for prevention and treatment of HBV infection, we designed transgenic mice as a disease model which can mimic HBV infection, In this study, a promoter-HBV DNA fragment for the preparation of HBV transgenic mice has been constructed. To add a proper enzyme site on 5' end of HBV gene, total HBV (subtype adr) gene was inserted into BamHI site of pBluescript SK vector and reextracted by PstI-SacI treatment A liver-specific promoter, rat ${\alpha}$ 2u globulin gene promoter, was insrted to pBluescript SK vector and reextracted by BamHI-PstI treatment, Promoter-HBV DNA was constructed by ligation of two fragments using identical PstI sites. For large scale production of promoter-HBV DNA, it was inserted to BamHI-SacI site of pBluescript SK vector.