• Journal of Environmental Health Sciences
• /
• v.49 no.4
• /
• pp.183-189
• /
• 2023

Background: The indoor air quality of classrooms, in which the capacity per unit area is high and students spend time together, must be managed for safety and comfort. It is necessary to develop an eco-friendly indoor air quality reduction method rather than biased management that relies solely on air purifiers. Objectives: In this study, plants and air purifiers were installed in middle school classrooms to evaluate the indoor PM_2.5 reduction. Methods: Four middle school classrooms were selected as test beds. Air quality was monitored in real-time every one minute using IoT equipment installed in the classrooms, corridors, and rooftops. After measuring the background concentration, plants and air purifiers were installed in the classroom and the PM_2.5 reduction effect was analyzed through continuous monitoring. Results: After installing the plants and air purifiers, the average PM_2.5 concentration was 33.7 ㎍/m³ in the classrooms without plants and air purifiers, 25.6 ㎍/m³ in classrooms with plants only, and 21.7 ㎍/m³ in classrooms with air purifiers only. In the classroom where plants and air purifiers were installed together, it was 20.0 ㎍/m³. The reduction rates before and after installation were 4.5% for classrooms with plants only, 16.5% for classrooms with air purifiers only, and 27.6% for classrooms with both plants and air purifiers. The I/O ratio, which compares the concentration of PM_2.5 in classrooms with corridors and outside air, also showed the lowest in the order of plants and air purifiers, air purifiers, and plant-only classrooms. Conclusions: The PM_2.5 reduction effect of using plants was confirmed, and it is expected to be used as basic data for the development of environmentally-friendly indoor air quality improvement methods.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.295-303
• /
• 2023

South Korea has recently witnessed an increasing number of seismic events, leading to a surge in studies focusing on seismic earth pressures, as well as the attributes of geological layers and ground where foundations are established. Consequently, earthquake-resistant design has become imperative to ensure the safety of subterranean structures. The slurry wall method, due to its superior wall rigidity, excellent water resistance, and minimal noise and vibration, is often employed in constructing high-rise buildings in urban areas. However, given the separation between panels that constitute the wall, slurry walls possess limited resistance to seismic loads in the longitudinal direction. As a solution, several studies have probed into the possibility of interconnecting slurry wall panels to augment their seismic performance. In this research, we developed and evaluated a method for linking slurry wall panels using mechanical joints, including concrete-confined steel pipes and headed bars, through mock-up tests. We also assessed the constructability of the suggested method and compared it with other analogous methods. Any challenges identified during the mock-up test were discussed to guide future research in resolving them. The results of this study aid in enhancing the seismic performance of slurry walls through the development of an interconnected panel method. Further research can build on these findings to address the identified issues and improve the efficacy and reliability of the proposed method.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.123-131
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. Several cases of pile failures were reported despite the fact that a large margin of safety factor was employed in their design. In this study, 1-g shaking table tests were performed in order to analyze the failure behavior of piles embedded in liquefied soil deposits by buckling instability. As a result, it can be concluded that the pile subjected to excessive axial loads $(near\;P_{cr})$ can fail easily by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, it was found that lateral loading due to lateral spreading increased lateral deflection of pile and reduced the buckling load. In addition, from the buckling shape of pile, difference between Euler's buckling and pile buckling vat observed. In the case of pile buckling, hinge formed at the middle point of the pile, not at the bottom. And in sloping grounds, location of hinge formation got lower compared with level ground because of the soil movements.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.27-40
• /
• 2006

Damage of cut-and-cover tunnel lining can be attributed to physical and mechanical factors. Physical factors include material property, reinforcement corrosion, etc. while mechanical factors include underground water pressure, vehicle loads, etc. This study is limited to the modeling of rigid circular cut and cover tunnel constructed at a depth of $1.0{\sim}1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. In this study, only damages due to mechanical factors in the form of additional loads were considered. Among the different types of additional, excessive earth pressure acting on the cut-and-cover tunnel lining is considered as one of the major factors that induce deformation and damage of tunnels after the construction is completed. Excessive earth pressure may be attributed to insufficient compaction, consolidation due to self-weight of backfill soil, precipitation and vibration caused by traffic. Laboratory tunnel model tests were performed in order to determine the earth pressure acting on the tunnel lining and to investigate the applicability of existing earth pressure formulas. Based on the difference in the monitored and computed earth pressure, a factor of safety was recommended. Soil deformation mechanism around the tunnel was also presented using the picture analysis method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.104-108
• /
• 2023

Because of recent expansion of the electric car market. it is highly growing that should be supplemented its performance and safely issue. The EMI problem due to the interlocking of electrical components that causes various safety problems such as fire in electric vehicles is emerging every time. We strive to achieve optimal charging efficiency by combining various technologies and reduce radioactive noise among the EMI noise of a weirless charging control module, one of the important parts of an electric vehicle was designed and tested. In order to analyze the EMI problems occurring in the wireless charging control module, the optimized wireless charging control module by applying the optimization design technology by learning the accumulated test data for critical factors by utilizing the Python-based script function in the Ansys simulation tool. It showed an EMI noise improvement effect of 25 dBu V/m compared to the charge control module. These results not only contribute to the development of a more stable and reliable weirless charging function in electric vehicles, but also increase the usability and efficiency of electric vehicles. This allows electric vehicles to be more usable and efficient, making them an environmentally friendly alternative.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.1
• /
• pp.61-67
• /
• 2022

Intraoperative neurophysiological monitoring (INM) ensures the stability and safety of specific surgeries in high-risk groups. As part of INM, intensive tests are conducted during the surgical process. When INM tests are applied during surgery, a delay in notifying the operating surgeon in cases of neurological defects can cause serious irreversible sequelae to the patient. Aortic replacement, which is necessitated due to aortic aneurysms and aortic dissection, is a complicated procedure that blocks the blood flow to the heart. When arteries that branch out from the aorta and supply blood to the spinal cord are replaced, blood flow to the spinal cord decreases, resulting in spinal ischemia. In aortic surgery, INM plays an important role in preventing spinal ischemia and serious complications by quickly detecting the early signs of spinal ischemia during cross-clamping and reporting it to the surgeon. Therefore, this paper was prepared to help examiners who conduct INM by detailing the process, method, time, and warning criteria for INM. This paper identifies the need for INM in aortic surgery and the process flow for a smooth test, accurate and rapid examination, and subsequent reporting.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.1
• /
• pp.23-27
• /
• 2022

Disposable wet wipes provided by general restaurants in the Jeju Special Self-Governing Province were evaluated for compliance with the labeling requirements and the degree of bacterial contamination set by the Ministry of Food and Drug Safety. Of the 32 types of disposable wipes, five types of disposable wipes did not indicate the name and location of the business office of the manufacturer. Only 12 types of wet wipes were marked with the date of manufacture and expiration date. Bacterial contamination was seen in 9 types of wet wipes through bacterial culture but these were absent in the remaining 23 types (71.9%). The results of the antimicrobial susceptibility test for the 9 identified strains showed no methicillin-resistant coagulase-negative staphylococci (MRCNS) or multidrug-resistant bacteria. Through this study, it is recommended that the date of manufacture and expiration date must be indicated on the surface of disposable wet wipes designated as hygiene products, and clean uncontaminated wet wipes must comply with storage standards. In addition, the results are expected to contribute to the enhancement and improvement of hygiene management supervision, personal hygiene management, and an improvement in national health.

• Journal of Applied Biological Chemistry
• /
• v.65 no.1
• /
• pp.17-21
• /
• 2022

A new rapid and simple method for metalaxyl in Atractylodes macrocephala Koidzumi and Achyranthes japonica Nakai has been developed and validated. This study was conducted to develop a method for analyzing metalaxyl by a method based on QuEChERS using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Samples were extracted with acetonitrile and purified using amino-propyl (NH₂) Solid Phase Extraction cartridge. The method limit of quantitation (MLOQ) was 0.01 mg/kg. The linearity of matrix-matched calibration curve (r²) was ≥0.99 at the calibration range of 0.001-0.05 mg/kg. For recovery test, Atractylodes macrocephala Koidzumi or Achyranthes japonica Nakai was treated with standard solutions at MLOQ and 10MLOQ levels. Recovery rates were in the range of 88.1-109.1% with <5.5% coefficient of variation. This established analytical method was fully validated. Based on these results, it can contribute to improving the safety of residual pesticides in Atractylodes macrocephala Koidzumi and Achyranthes japonica Nakai.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.10
• /
• pp.871-882
• /
• 2018

This study investigated meaning of life as mediator of the relationships of meaning of work and happiness in Koran middle aged. A sample of 171 middle aged were participated. in survey about meaning of work, meaning of work and happiness. The data were analyzed using correlation test and path analysis. The results was followed. First, every factors was positively correlated. The meaning of work was positively correlated with meaning in life and happiness. And meaning in life was also positively correlated with happiness. Second, the meaning in life had partial mediation effect between meaning of work and happiness. The middle aged's higher score of meaning of work not only directly increased happiness, but also induced higher level of meaning in life, which, in turn, increased happiness. The results of this study suggested that meaning of work is a predictor meaning in life and happness, and meaning in life can be important factor of the relationship between meaning of work and happiness.