• Journal of Animal Science and Technology
• /
• 제63권4호
• /
• pp.693-724
• /
• 2021

The in-vitro meat is a novel concept in food biotechnology comprising field of tissue engineering and cellular agriculture. It involves production of edible biomass by in-vitro culture of stem cells harvested from the muscle of live animals by self-organizing or scaffolding methodology. It is considered as efficient, environmental friendly, better ensuring public safety and nutritional security, as well as ethical way of producing meat. Source of stem cells, media ingredients, supply of large size bioreactors, skilled manpower, sanitary requirements, production of products with similar sensory and textural attributes as of conventional meat, consumer acceptance, and proper set up of regulatory framework are challenges faced in commercialization and consumer acceptance of in-vitro meat. To realize any perceivable change in various socio-economic and environmental spheres, the technology should be commercialized and should be cost-effective as conventional meat and widely accepted among consumers. The new challenges of increasing demand of meat with the increasing population could be fulfill by the establishment of in-vitro meat production at large scale and its popularization. The adoption of in-vitro meat production at an industrial scale will lead to self-sufficiency in the developed world.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.60-70
• /
• 2021

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

• 한국지반공학회논문집
• /
• 제38권11호
• /
• pp.97-106
• /
• 2022

국내 매입말뚝 시공방법은 선굴착 후 최종단계의 항타 관입량으로 관리하는 것이 일반적이다. 관입량은 오래전부터 수기 측정방식에 의해 이루어지고 있으며, 작업자의 안전문제와 측정값의 신뢰도 부족 등에도 작업성의 한계와 비용 문제로 자동화 기술이 적용되지 않고 있다. 본 연구에서는 비접촉식 말뚝 관입량 측정 장치를 개발하고 기존 장치와 비교계측을 통해 현장 성능을 검증하였다. 또한 관입량 측정장치를 활용하여 현장 품질관리 방법에 대해 분석하였다. 실제 현장 실험을 통해 개발 장치를 활용한 관입량 측정과 수정 Hiley공식 및 동적감쇠계수 산정을 통해 보다 신뢰도 높은 지지력 추정이 가능한 것을 확인하였다. 연구결과에 따라 각 현장마다 수행된 동재하시험으로 부터 현장 보정 절차가 이루어지면 보다 신뢰성 높은 지지력 추정이 가능하며, 실제 현장에서는 동재하시험이 수행되지 않은 말뚝에 대해서도 지지력 관점의 말뚝 시공관리에 활용할 수 있을 것으로 판단된다.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 한국지반공학회논문집
• /
• 제26권10호
• /
• pp.15-25
• /
• 2010

본 연구에서는 정규압밀된 점토지반에서 피에조콘관입시험 (PCPT) 결과를 이용하여 원위치 응력상태를 평가할 수 있는 방법을 제안하였다. 이를 위해 다양한 현장시험과 실내시험 결과를 분석하였으며, 현장시험에서 구해진 PCPT 결과값과 실내시험에서 얻어진 결과를 토대로 이론식을 산정하였다. 제안된 방법에서는 기존 방법에 포함되어 있던 불교란 시료 채취과정과 단위중량 결정을 위한 별도의 실험과정이 요구되지 않으며, PCPT 시험결과를 통해 유효응력의 추정이 가능하기 때문에, 조사과정에서의 비용이나 소요시간을 최소화 할 수 있다. 제안된 방법의 적용성 평가를 위하여 국내의 다양한 점성토 지반에서 수행된 피에조콘관입시험 결과를 수집하였으며, 이를 토대로 제안된 방법에 의한 결과와 기존방법의 결과와의 비교분석을 실시하였다. 분석결과, 예측된 결과는 측정된 결과와 유사함을 확인할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.39-46
• /
• 2024

본 논문에서는 독거노인의 건강상태를 실시간 모니터링이 가능한 저가형 웨어러블 디바이스를 제안한다. 고령화가 가속되면서 노령 인구가 급증하고 있으며 독거노인의 사회적 고립으로 인해 신체, 정신적 어려움이 발생하고 고독사하는 노인들의 수가 증가해 사회적 문제가 되고 있다. 또한, 독거노인 관리를 위한 정부 인력은 한정되어 독거노인의 안전과 복지를 보장하는 데 현실적인 어려움이 있다. 이에 본 논문에서는 독거노인의 생체정보를 모니터링할 수 있는 복대형 웨어러블 기기를 제안한다. 제안하는 기기는 복대에 내장된 아두이노 기반의 센서를 통해 근전도, 심전도 및 체온 정보를 원격 서버에 전송한다. 전송된 정보는 실시간으로 웹 환경에서 모니터링 할 수 있으며, 적은 관리 인력으로 다수의 대상자를 원격 모니터링할 수 있는 특징을 가진다. 또한, 독거노인의 거주 환경에서 생체 데이터를 수집하고 일반 복대를 이용한 저가형 모델로 보급의 효율성을 가진다. 연구의 결과물은 독거노인의 고독사 상황을 사전에 감지할 뿐만 아니라 일상생활에서 발생할 수 있는 위험 상황에 즉각적인 대처를 통해 독거노인의 안전 및 복지 수준 향상에 기여할 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제39권1호
• /
• pp.1-11
• /
• 2024

Geotechnical parameter estimation is critical to the design, performance, safety, and cost and schedule management in Tunnel Boring Machine projects. Since these parameters vary within a certain range, relying on mean values for evaluation introduces significant risks to the project. Due to the non-homogeneous characteristics of geological formation, data may not exhibit a normal distribution and the presence of outliers might be deceptive. Therefore, the use of reliable analyses and simulation models is inevitable in the course of the data evaluation process. Advanced modeling techniques enable comprehensive analysis of the project data and allowing to model the uncertainty in geotechnical parameters. This study involves using Monte Carlo Simulation method to predict probabilistic distributions of field data, and therefore, establish a basis for designs and in turn to minimize project risks. In the study, 166 sets of geotechnical data Obtained from 35 boreholes including Standard Penetration Test, Limit Pressure, Liquid Limit, and Plastic Limit values, which are mostly utilized parameters in estimating project requirements, were used to estimate the geotechnical data distribution of the study field. In this context, firstly, the data was subjected to multi-parameter linear regression and variance analysis. Then, the obtained equations were implemented into a Monte Carlo Simulation, and probabilistic distributions of the geotechnical data of the field were simulated and corresponding to the 90% probability range, along with the minimum and maximum values at the 5% probability levels presented. Accordingly, while the average SPT N30 value is 42.86, but the highest occurrence rate is 50.81. For Net Limit Pressure, the average field data is 17.07 kg/cm², with the maximum occurrence between 9.6 kg/cm² and 13.7 kg/cm². Similarly, the average Plastic Limit value is 22.32, while the most probable value is 20.6. The average Liquid Limit value is 56.73, with the highest probability at 54.48, as indicated in the statistical data distribution. Understanding the percentage distribution of data likely to be encountered in the project allows for accurate forecasting of both high and low probability scenarios, offering a significant advantage, particularly in ordering TBM requirements.

• 대한원격탐사학회지
• /
• 제33권6_2호
• /
• pp.1139-1149
• /
• 2017

수목을 3차원 구조로 정량화하는 것은 다양한 환경분석 모델링의 입력 자료로써 매우 중요하다. 그러나 3차원 측량이 가능한 라이다는 고비용과 전문인력이 필요해 파편화된 소규모의 도시녹지를 측량하기에는 경제적 장비운용적 차원에서 현실적이지 않다. 또한 수목은 계절에 따라 민감하게 변화하므로 시계열 모니터링으로 도시생태계를 이해하려면 높은 빈도로 쉽고 빠르게 수관구조를 측량할 수 있는 디바이스와 이에 맞는 정량화기법의 개발이 필요하다. 환경분석 모델링의 입력 자료로써의 필요가 아니더라도, 도시내 수목의 크기와 나이는 관리비용, 생태계서비스, 경관, 안전 등과 직결되므로 반드시 정보화될 필요성이 있다. 본 연구에서는 도시내 수목의 3차원 환경정보 데이터를 생성하기 위한 디바이스와 방법론으로써 UAV(Unmanned Aerial Vehicle)와 SfM-MVS(Structure from Motion-Multi View Stereo), solid modeling을 제시하였다. 따라서 제시된 device와 방법론의 검증을 목표로 하여 다음과 같이 분석을 수행하였다. 첫째, stereo image들로부터 생성된 point cloud로 측량한 결과의 정확도를 지상 라이다 자료와 비교 검증하였다. 두 번째, UAV촬영 사진개수를 감소시킴에 따라 변화하는 point cloud의 밀도가 수목의 부피 및 크기 정량화 결과에 어떤 영향을 주는지를 살펴봄으로써 고해상도의 point cloud가 정밀한 수목 측량에 꼭 필요한 요소인지를 확인하여 보았다. 마지막으로, 수목 부피의 정량화 및 형상화를 위해 solid model이 얼마나 적합한가를 검증하고자 다른 3D type의 측정치와 비교하였다. 분석의 결과를 통해, UAV와 SfM-MVS 그리고 solid model을 이용하면 단일수목을 손쉽게 저비용 높은 시간해상도로 정량화 및 형상화가 가능함을 확인하였다. 다만, 본 연구는 단일 개체목만을 대상으로 한 연구이므로 더 넓은 녹지에 적용하기 위해서는 이에 맞는 비행계획의 수립, 다양한 공간정보 데이터와의 융합, 녹지규모 확대에 따른 정량화 기법의 개선 등 앞으로 이를 발전시킬 수 있는 후속연구가 필요하다.

• 산경연구논집
• /
• 제9권12호
• /
• pp.45-53
• /
• 2018

Purpose - The purpose of the study was to investigate operation system of current convenience store and competing retail store and to find out development of unattended convenience store. Operators can save labor cost and solve labor seeking when opening shop under suitable environment and commerce area, and assure of employee's safety. Customers are allowed to select commodity comfortably without disclosure of face and to shorten standby time at simple store opening, buying and paying and to produce convenient living environment by financing, delivery and goods control. This study examined effect and problems of operation of existing and unattended convenience store from point of view of visual merchandising to find out model of unattended convenience store and to strengthen competitiveness of convenience store business. Research design, data, and methodology - Research procedure of accomplishment of goal of the study was: The study investigated state of distribution business, and role and definition of VMD. First, VMD played an important role of promotion and competitiveness of unattended convenience stores. Second, the author investigated research and cases of unattended convenience stores 14 months, that is to say, from August 15, 2017 to October 15, 2018. Third, the author investigated on-the-spot three of common convenience stores, three of unattended convenience stores and three of retailers one month, that is to say, June 1, 2018 to July 1, 2018. The subject was convenience stores and retailers selling similar type of products at Seoul and metropolitan area. Results - Layout, selling place, brand identity, goods assortment, authentication system, product information cognition and control, buying and payment system, security system, salesmen, promotion and other services should be improved from point of view of merchandising. Structure, furniture, lighting, voice, façade, VP, PP, IP and POP should be developed. Conclusions - Unattended convenience stores saved operating cost and lessened labor and gave visitors convenience and comfortable shopping and made use of resources effectively. Further studies with quantitative analysis shall find out strategic conditions for promotion of unattended convenience stores.

• 대한가정학회지
• /
• 제46권4호
• /
• pp.71-81
• /
• 2008

The purposes of this study were to investigate the eating status and to analyze expenditures of the traditional fermented foods. A structured questionnaire survey was conducted from 370 housewives in Jeonbuk province and there were 300 usable samples(81.1%) valid for analysis. For the statistical analysis, the data was analyzed by $x^2$-test using SPSSIPC 12.0 for windows. The results of this study were as follows : 1. In the investigation on the eating status of the traditional fermented foods, Kimchi showed highest intake frequency(over once a day) and next Doenjang, Gochujang, Ganjang were consumed $2\;{\sim}\;3$ times per week. Jeotgal and Jangajji consumption showed the significant difference frequencies between the age groups(p < 0.001). The frequencies of using the home-made fermented foods were either similar or decreased, while the manufactured products were either similar or increased. The reasons behind the decreasing consumption were 'because of appetite change(47.0%)', 'the effect of western food(25.2%)' and 'dislike of salty food(17.4%)'. 90.7%(Kimchi), 54.9%(Doenjang), 54.8%(Gochujang), 53.2%(Cheongkukjang) of respondents knew the methods of preparation, while 62.5%(Ganjang), 41.1%(Jeotgal,) 31.2%(Jangajji) of respondents didn't know the methods of preparation. 2. In the analysis of the expenditure for the purchasing of the traditional fermented foods, most of the respondents procured Kimchi, Doenjang, Gochujang from their families or relatives, but they bought Ganjang, Jeotgal, Jangajji in the markets. And most of the respondents bought the fermented foods in the general merchandise stores or the department store except Kimchi. The places of buying Kimchi were specialty stores(34.6%), general merchandise stores or department stores(25.0%). Overall scores of satisfaction for the quality of manufactured fermented foods showed 3.29 of 5 - point scales. The average cost per month of Kimchi was 19,550won and Gochujang 7,878won, Doenjang 5,764won, Jeotgal 5,439won, Jangajji 5,412won, Ganjang(for soup) 4,714won, Cheongkukjang 4,677won, Ganjang(for seasoning) 4,464won, and total cost was 20,920won. The reasons behind purchasing the traditional fermented foods were 'because of convenience(58.4%)', 'no time to make by oneself(23.0%)' and 'for not knowing the making methods(12.8%)'. The problems of the manufactured traditional fermented foods were 'worry about safety of the raw materials or additives(71.2%)', 'lack of sanitation(12.0%)'. The most important thing considered in purchasing was 'materials and origins(86.6%)' and next 'quality(64.1%)' was another important thing.