• 한국안전학회지
• /
• 제8권4호
• /
• pp.165-174
• /
• 1993

For the safety assessment of the demonstration-scale incineration plant for treating the combustible radioactive wastes, radiation doses of a worker and a residential individual were estimated. The demonstration plant showed a good performance of trial-burn tests using non-radioactive tracers with resulting In high mass reduction of around 40 times and very low emmission of dusts through a stack, which promised a high decontamination factor in an order of 10$^{7}$ . Based on the result s obtained from the trial-burns in the process, the estimation of radiation dose for workers and general publics near the plant was made using dose pathway calculation theories. The parametric values for calculation were selected from design and operational results of the process and from more conservative conditions In reference data. The estimated annual doses for workers and residential indivisuals were 3.07 $\times$ 10$^{-4}$ and 4.35 X 10$^{-8}$ $\mu$Sv/y, respectively, which were high enough to operate the process when comparing with the allowable dose limit in the regulation. The dose calculation models were quite applicable with showing an excellent safety for the process.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.108-114
• /
• 2019

Unattended Train operation(UTO) requires higher safety target than other systems, since all train operations are automatic. The system provider to deliver without accident or failure, and the operator to transport passengers without accident by putting all trains supplied, including them, into service. Safety rates without such failures can be represented as indicators of RAMS, among which availability is continuously controllable to achieve the target, with a clear target. Availability is often required by the licensee from the initial stage of the project to demonstrate that the request for proposal (RFP) is usually specified and to maintain separate availability targets at the operational stage. In particular, unlike unmanned operation light rail in complex systems, simple formulas are often presented to facilitate verification at each stage. This paper presents this method of usability calculation in an integrated manner at all levels and analyzes the existing usability values to ensure reliability of the availability formula for integrated use in unmanned light rail systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.306-320
• /
• 2021

To ensure safe port operations around the world, it is important to solve mooring problems. In particular, the many ports that face open seas have difficulties with long-period waves. As a countermeasure, the installation of a breakwater is proposed for mooring safety. However, this often cannot be put into practice because of financial issues. Instead, port terminals control berthing schedules with weather forecasting. However, mooring problems remain unsolved, because of inaccurate wave forecasting. To quantify the current situation, numerical simulations are presented with ship motions, fender deflections, and rope tensions. In addition, novel simulations for mooring ropes are proposed considering tension, friction, bending fatigue, and temperature. With this novel simulation, the optimal mooring method in terms of safety and economic efficiency was confirmed. In terms of safety, the optimal mooring method is verified to minimize dangerous mooring situations. Moreover, the optimal mooring method shows economic benefits and efficiency. It can help to reinforce the safety of port terminals and improve the efficiency of port operations.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.287-299
• /
• 2022

Rather than using smartphones as seismometers with designated locations and orientations, this study proposes to employ crowds' smartphones in buildings to perform fast safety assessment of buildings. The principal advantage of using crowds' smartphones is the potential to monitor the safety of millions of buildings without hardware costs, installation labor, and long-term maintenance. This study's goal is to measure the maximum interstory drift ratios during earthquake excitation using crowds' smartphones. Beacons inside the building are required to provide the location and relevant building information for the smartphones via Bluetooth. Wi-Fi Direct is employed between nearby smartphones to conduct peer-to-peer time synchronization and exchange the acceleration data measured. An algorithm to align the orientation between nearby smartphones is proposed, and the performance of the orientation alignment, interstory drift measurement, and damage level estimation are studied numerically. Finally, the proposed approach's performance is verified using large-scale shaking table tests of a scaled steel building. The results presented in this study illustrate the potential to use crowds' smartphones with the proposed approach to record building motions during earthquakes and use those data to estimate buildings' safety based on the interstory drift ratios measured.

• 한국식품위생안전성학회지
• /
• 제26권4호
• /
• pp.302-307
• /
• 2011

One of the most important objectives of post-marketing monitoring of dietary supplements is the early detection of unknown and unexpected adverse events (AEs). Several causality algorithms, such as the Naranjo scale, the RUCAM scale, and the M & V scale are available for the estimation of the likelihood of causation between a product and an AE. Based on the existing algorithms, the Korea Food & Drug Administration has developed a new algorithm tool to reflect the characteristics of dietary supplements in the causality analysis. However, additional work will be required to confirm if the newly developed algorithm tool has reasonable sensitivity and not to generate an unacceptable number of false positives signals.

• 한국안전학회지
• /
• 제38권1호
• /
• pp.70-77
• /
• 2023

Gas has replaced coal or petroleum as primary fuel because of its convenience. However, gas has risk of fire, explosion, or poisoning. To reduce gas-related accidents, many strategic projects have been being carried based on 'Gas Safety Management Basic Plans' on a domestic scale. In spite of those projects, the gas-related accident rate did not decrease over past decades. Thus, this study was conducted to analyze the effectiveness of ongoing projects, and to find out ways to make improvements. Conventional statistical analyses on accident data published by gas-related institutions were not useful to determine meaningful attributes to predict future. Whereas, accident case analyses adopted in the present study discovered differences in the type of people and their unsafe acts for each gas type. Meanwhile, the overall average priority of projects was not high in the aspect of System Safety Precedence. If the current trend is maintained, with sigmoid functions, it can be estimated that mean annual accident rate will decrease by only 2.0% in the next two decades. To improve the current trend, the present study made conclusions as followings: (1) safety projects should be designed with careful consideration of accident traits including gas type, unsafe acts, and persons involved and (2) alternative strategies should include system considerations such as minimum hazard design and safety devices prior to mere education or training. To summarize briefly, the present state related with gas accidents highlights the necessity of a system-based multidisciplinary approach.

• 지질공학
• /
• 제28권3호
• /
• pp.443-453
• /
• 2018

하천변에서의 대용량 강변여과수 개발은 방사형 집수정을 통하여 주로 이루어지는데, 초기 취수량의 산정을 위한 다양한 경험식이 개발되어 왔다. 안성천에 설치된 방사형 집수정을 대상으로 경험식을 활용한 초기 취수량을 추정한 결과, Babac, Kordas 및 Petrovic 방법은 실제 취수량 $6,124m^3/d$과 유사하나 Milojevic 방법은 상대적으로 차이가 큰 것으로 나타났다. 이는 각 방법별 적용 조건의 차이에 기인한 것으로 보인다. 각 방법의 입력 인자인 하천에서 집수정까지의 거리, 수평정의 개수, 대수층의 두께, 수평정의 길이, 수리전도도 등의 변화에 따른 추정식의 적용성을 분석한 결과, 각 방법별로 일정 조건하에서의 추정식 사용이 요구되며, 특히 수리전도도는 취수량 결정에 매우 중요하므로 정확한 산정이 필요함을 보여준다.

• Advances in Computational Design
• /
• 제3권3호
• /
• pp.269-288
• /
• 2018

180 different 2D numerical analyses have been carried out to estimate the factor of safety (FOS) for rooted slopes. Four different types of vegetated coverage and a variety of slope geometry considering three types of soil have been evaluated in this study. The highly influenced parameters on the slope's FOS are determined. They have been chosen as the input parameters for developing a new practical relationship to estimate the FOS with an emphasis on the roots effects. The dependency of sliding mode and shape considering the soil and roots-type has been evaluated by using the numerical finite element model. It is observed that the inclination and height of the slope and the coverage type are the most important effective factors in FOS. While the soil strength parameters and its physical properties would be considered as the second major group that affects the FOS. Achieved results from the developed relationship have shown the acceptable estimation for the roots slope. The extracted R square from the proposed relationship considering nonlinear estimation has been achieved up to 0.85. As a further cross check, the achieved R square from a multi-layer neural network has also been observed to be around 0.92. The numerical verification considering different scenarios has been done in the current evaluation.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.133-139
• /
• 2018

Background: Selecting priority occupational carcinogens is important for cancer prevention efforts; however, standardized selection methods are not available. The objective of this paper was to describe the methods used by CAREX Canada in 2015 to establish priorities for preventing occupational cancer, with a focus on exposure estimation and descriptive profiles. Methods: Four criteria were used in an expert assessment process to guide carcinogen prioritization: (1) the likelihood of presence and/or use in Canadian workplaces; (2) toxicity of the substance (strength of evidence for carcinogenicity and other health effects); (3) feasibility of producing a carcinogen profile and/or an occupational estimate; and (4) special interest from the public/scientific community. Carcinogens were ranked as high, medium or low priority based on specific conditions regarding these criteria, and stakeholder input was incorporated. Priorities were set separately for the creation of new carcinogen profiles and for new occupational exposure estimates. Results: Overall, 246 agents were reviewed for inclusion in the occupational priorities list. For carcinogen profile generation, 103 were prioritized (11 high, 33 medium, and 59 low priority), and 36 carcinogens were deemed priorities for occupational exposure estimation (13 high, 17 medium, and 6 low priority). Conclusion: Prioritizing and ranking occupational carcinogens is required for a variety of purposes, including research, resource allocation at different jurisdictional levels, calculations of occupational cancer burden, and planning of CAREX-type projects in different countries. This paper outlines how this process was achieved in Canada; this may provide a model for other countries and jurisdictions as a part of occupational cancer prevention efforts.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1667-1674
• /
• 2010

항공기 구조는 신뢰성 보장을 위해 피로하중에 대한 수명예측이 중요한 분야로 고려되고 있다. 본 논문에서는 항공기 비행안전과 가장 밀접한 엔진 지지구조물을 대상으로 S-N 곡선과 등가응력을 이용하여 선형누적손상 이론을 적용한 피로수명 해석을 수행하였다. 내추락 하중 조건에서 정적강도 해석의 최대응력은 가위형 링크 부위에 1,080MPa를 나타내었으며, 이는 온도감소계수를 적용한 허용응력보다 약 5%의 여유를 가지고 있다. 피로하중 조건에서 최대응력은 가위형 링크 부위에 876MPa로 가장 높았으며, 이 때 응력방정식 계수도 0.019MPa/N으로 최대를 나타내었다. 피로수명 해석에 의한 안전수명은 가위형 링크 상단부에 있는 프레팅 영역이 416,667H이고, 다른 부위는 무한수명이 산출되어, 항공기 엔진 지지구조물(가위형 링크, 직선형 링크)은 피로수명 요구도를 충족하는 것으로 확인되었다.