• 시큐리티연구
• /
• 제2호
• /
• pp.61-81
• /
• 1999

While the progress of preparation for the 2002 World Cup games goes on the environment is changing by industrializations development of science and specialization of technology, because of that recently the crime has also became intellectual so the importance on countermeasure of safety has raised. The countermeasure for safety The stadium is a limited space where amount of population could be concentrated, so that in a moment there could be a great casualties by terrorism, specially there should be efficient countermeasures for bomb terrorism. So to be prepared for the problems that had been appeared on bomb terrorism activities of North Korea around the world, we should know about the inspection environment and special inspection environment, and for the prevention first of all I've studied on suitable way to inspect the stadiums secondly to plan on specialized training of the necessary personnel on inspection and finally efficiency of use on inspection equipment. With there following plans we could make perfect safety countermeasures focused on prevention for the successful World Cup games.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.67-72
• /
• 2008

The lower flash points for the flammable binary systems, 2-propanol+formic acid and 2-propanol+n-butyric acid, were measured by Cleveland open cup tester. The optimization method using van Laar equation and the Raoult's law were used to estimate the lower flash points and were compared with experimentally-derived data. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.35-41
• /
• 2016

Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of 30~50s aged male and female workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, subjects who passed the fit test were increased from 10 to 33. Moreover, the geometric mean (GM) of FF was increased by 340% in subjects who failed the test. In addition, the training effects for the cup-type mask were significant in female and 50s aged subjects. On the other hand, although the GM of FF for the foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in sex and aged of the subjects were not significantly for the foldable-type mask. The multi-distribution of leak points for the foldable-type mask may be one of causes for the less effect of training on the fit of the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, It is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and that efficient tranining programs for the foldable-type mask are required.

• 한국가스학회지
• /
• 제9권3호
• /
• pp.21-26
• /
• 2005

인화점과 연소점은 가연성 물질의 화재 및 폭발 위험성을 결정하는데 가장 중요한 연소 특성치 가운데 하나이다. 본 연구에서는 방향족탄화수소에 대해 Pensky-Martens 밀폐식 장치(ASTM-D93) Tag 개방식장치(ASTM D1310-86)를 이용하여 인화점을 측정하였고, Tag 개방식 장치를 이용하여 연소점을 측정하였다. 측정된 인화점은 문헌값들과 일치하였으며, 연소점은 화학양론계수의 1.23배를 근거로 예측 값과 비교한 결과, 제시된 식은 실험값과 잘 일치하였다.

• 한국식품위생안전성학회지
• /
• 제28권4호
• /
• pp.342-348
• /
• 2013

본 연구에서는 감귤류 중 온주밀감, 레몬, 한라봉의 과피추출물(PE)에 대한 항염증 효과를 조사하였다. 감귤류 세품종 과피추출물(PE)에 대한 murine macrophage cell line Raw 264.7세포를 배양하여 세포독성, NO생성량, 세포내 염증관련 단백질 발현 양상을 분석하였다. 그 결과 CUP, CHP, CLP 처리구의 경우 2 mg/mL 이하의 농도에서는 세포생육을 저해하지 않았다. LPS (100 ng/mL)를 처리한 세포의 NO생성량을 LPS를 처리하지 않은 대조구와 비교했을 때 상당량이 증가했음을 알 수 있었고, 추출물을 농도별로 처리했을 때 농도가 증가할수록 NO생성량은 감소하였다. 각 처리구에서 각 1 mg/mL 농도에서는 CUP > CHP > CLP 순으로 NO 저해활성이 강하게 나타났다. Western blot의 결과상으로는 CUP와 CHP의 iNOS 단백질 저해활성이 비슷한 강도로 나타남을 확인하였다. COX-2 효소의 저해활성은 CUP > CHP > CLP의 순으로 나타났다. 따라서 CUP, CHP, CLP 처리구는 모두 항염증 작용을 가지고 있으며, 또한 CUP 처리구가 세 개의 추출물 중에서 가장 저해활성이 강하였다.

• 시큐리티연구
• /
• 제5호
• /
• pp.41-69
• /
• 2002

This work analyze the hitec-based arms systems which might raise the tentions by terrorism. Apparently they are largely dependent on the biochemicals, electronics, laser, and cybernetics. Also they draw an attention to us of a probability of various threats from the terrorists, or ill intending regimes to deter the 2002's World Cup, under the heading of 'New Centennial, Meeting, and Start Movement.' What follows is that this research strongly proposes that we should take prior safety actions for hosting the successful World Cup Match in Korea-Japan as well as maintain the national security for peace.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.25-31
• /
• 2017

The flash point, explosion limits, autoignition temperature(AIT) are important combustible properties which need special concern in the chemical safety process that handle hazardous substances. For the evaluation of the flammable properties of n-butylacetate, this study was investigated the explosion limits of n-butylacetate in the reference data. The flash points, fire points and AIT by the ignition delay time of n-butylacetate were experimented. The lower flash points of n-butylacetate by using the Setaflash and Pensky-Martens closed-cup testers were $24^{\circ}C$ and $26^{\circ}C$, respectively. The flash points of n-butylacetate using the Tag and Cleveland open cup testers are measured $31^{\circ}C$ and $40^{\circ}C$, respectively. And the fire points of n-butylacetate by the Tag and Cleveland open cup testers were measured $32^{\circ}C$ and $41^{\circ}C$. The AIT of n-butylacetate measured by the ASTM 659E tester was measured as $411^{\circ}C$. The lower explosion limit of lower flash point $24^{\circ}C$, which was measured by the Setaflash tester, was calculated to be 1.40 vol%. Also, the upper explosion limit of upper flash point $67^{\circ}C$ the Setaflash tester was calculated to be 12.5 vol%.

• 식품산업과 영양
• /
• 제7권1호
• /
• pp.12-16
• /
• 2002

• International Journal of Safety
• /
• 제7권2호
• /
• pp.12-16
• /
• 2008

Lower flash points for the binary systems, carbon tetrachloride+o-xylene and water+n-butanol were measured by Pensky-Martens closed cup tester. The Raoult's law and optimization method using van Laar equation were used to predict the lower flash points and were compared with experimental data. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• 수산해양교육연구
• /
• 제15권1호
• /
• pp.123-133
• /
• 2003

The present investigations were carried out for the most and fundamental elements, what is called maneuverability, stability, safety, rig, sail about the world famous race, VOLVO60 and America's cup. The results obtained are summarized as follows: First, the structure of yacht should be designed with focuse on the preparation for the preparation of collision with other yachts around, with the dumps of iceberg and also whales nearby. At the same time, the accurate calculation on the each structure and equipment of yacht should be processed for the dynamic stability in the rainstorms. Second, VOLVO60, long-distance sailing, should be emphasized on the light weight and the safety, while the boat for America's cup, short-distance sailing, should be stressed on the appropriate weight of the body and the maximum speed for fast maneuverability. Third, up-to-the minute materials should be developed for the appropriate wind power and the turning of directions.