Recently, the overseas construction market has been actively promoted for about 10 years, and overseas dam construction has been continuously performed. For the economic and safe construction of the dam, it is important to prepare the main dam construction plan considering the design frequency of the diversion tunnel and the cofferdam. In this respect, the prediction of river level during the rainy season is significant. Since most of the overseas dam construction sites are located in areas with poor infrastructure, the most efficient and economic method to predict the water level in dam construction is to use the upstream water level. In this study, a linear regression model, which is one of the simplest statistical methods, was proposed and examined to predict the downstream level from the upstream level. The Pyeongchang River basin, which has the characteristics of the upper stream (mountain stream), was selected as the target site and the observed water level in Pyeongchang and Panwoon gaging station were used. A regression equation was developed using the water level data set from August 22th to 27th, 2017, and its applicability was tested using the water level data set from August 28th to September 1st, 2018. The dependent variable was selected as the "level difference between two stations," and the independent variable was selected as "the level of water level in Pyeongchang station two hours ago" and the "water level change rate in Pyeongchang station (m/hr)". In addition, the accuracy of the developed equation was checked by using the regression statistics of Root Mean Square Error (RMSE), Adjusted Coefficient of Determination (ACD), and Nach Sutcliffe efficiency Coefficient (NSEC). As a result, the statistical value of the linear regression model was very high, so the downstream water level prediction using the upstream water level was examined in a highly reliable way. In addition, the results of the application of the water level change rate (m/hr) to the regression equation show that although the increase of the statistical value is not large, it is effective to reduce the water level error in the rapid level rise section. Accordingly, this is a significant advantage in estimating the evacuation water level during main dam construction to secure safety in construction site.
본 논문에서는 네트워크 취약점 분석 결과의 정확성을 향상시키기 위한 방법으로 다양한 취약점 점검 도구를 통합할 수 있는 네트워크 취약점 자동 분석 시스템을 제안한다. 일반적으로 전문가에 의한 수동 점검이 가장 정확한 취약점 점검 방법으로 평가되지만, 복잡하고 규모가 큰 네트워크의 경우 효율적인 취약점 분석을 위해 자동화된 네트워크 취약점 점검 도구를 활용한다. 그런데 취약점점검 도구의 종류에 따라 점검 대상이 다르거나 동일한 점검 대상에 대해서도 점검 항목과 점검 결과가 다를 수가 있어, 상호보완적인 목적으로 몇 개의 취약점 점검 도구를 동시에 사용하는 것이 효과적이다. 그러나 취약점 점검 도구들의 점검 결과에 대한 연관성 분석과 통합 분석에는 사람에 의한 수동적인 분석 작업이 필요하기 때문에, 이것은 상당히 시간 소모적인 작업이 되고 네트워크의 규모에 따라 통합 분석이 불가능하기도 하다. 본 논문에서는 다양한 취약점 점검 도구를 통합할 수 있는 인터페이스를 제공하고, 공통의 점검 정책 수립과 통합 분석의 자동화를 특징으로 하는 네트워크 취약점 통합 분석 시스템을 제안한다.
복합발전플랜트 배열회수보일러 고압증발기의 기기인 분배기에 대하여 설계조건과 과도운전조건을 고려하여 응력 및 피로에 관한 안전성을 평가하였다. 먼저, 배열회수보일러 튜브군 모델의 해석결과로부터 분배기의 상부에 연결되는 수직 강수관, 하부에 연결되는 수직 급수배관, 열교환기의 입구헤더로 향하는 수평방향의 방사형 배관들에 대하여 노즐하중을 도출하였다. 이와 같이 구한 노즐하중은 분배기의 상세모델에 대한 설계조건과 과도운전조건의 해석 시에 노즐 단면에 가해지는 하중으로 사용하였다. 분배기의 상세한 해석모델을 만들고 설계조건의 내압과 노즐하중에 대한 정적구조해석을 수행하였다. 설계조건에서 최대응력은 수평방향 배관의 노즐 보어에서 발생하였다. 최대응력 위치의 국부 1차 막응력이 쉘과 노즐에서 허용기준보다 작으므로 ASME Code의 허용기준을 만족하는 것으로 나타났다. 배열회수보일러에 주어진 8가지 과도운전조건을 고려하여, 분배기의 상세모델에 대하여 열해석을 수행하고, 과도운전 시의 내압, 노즐하중, 열하중에 대한 과도구조해석을 수행하였다. 과도운전조건에서 최대응력은 분배기 상부의 수직 강수관 노즐 부위에서 발생하였다. ASME Code에 의거하여 수직 강수관 노즐 부위의 피로수명을 평가하였다. 결과적으로 계산된 누적피로사용계수가 허용기준보다 작으므로 기대수명 동안에 피로파손에 관하여 안전한 것으로 나타났다.
다수의 승객들이 이용하는 지하철은 안전과 공간의 쾌적한 환경관리가 필수적이며, 2003년 이후 기준 강화로 승강장 내에 스크린도어(PSD)를 반드시 설치해야 한다. 선행연구에 따르면 지하철 화재 시에 화재연기의 배연을 위해 배연설비의 설비용량 최적설계가 필요하다. 따라서 본 연구에서는 선행연구의 실험 결과를 바탕으로 3차원 수치해석기법을 이용하여 PSD가 설치된 승강장 내에서 화재발생 시 배연시스템 별로 CO가스와 Smoke의 유동을 분석하였다. 본 연구의 결과 비상시 상부 배연설비만 가동한 경우에는 CO 가스와 Smoke 농도는 653.8 ppm과 $768.4mg/m^3$로 피난 시 승객들의 위험이 큰 것으로 분석되었으며, 모든 배연설비를 가동하고 화재측 PSD만을 개방한 경우 CO 가스와 Smoke 농도 36.0 ppm 및 $26.2mg/m^3$를 보이며 화재연기의 전파범위가 줄어드는 것으로 분석되었다. 모든 배연설비를 가동하고 화재측 PSD를 미개방한 경우에는 화재연기 유입이 발생하지 않아서 대피환경에 있어 가장 효과적인 배연모드로 분석되었다.
한국형처분시스템에 이용될 가압경수로형 사용후핵연료를 위한 KDC-1 처분용기를 개발하였다. 처분용기 안전성 평가의 일환으로서 처분용기에 대한 구조적 안전성을 평가하였다. 처분용기의 구조적 안전성은 처분조건과 취급조건 2가지로 구분하여 평가하였다. 처분조건에서는 3가지 하중 조건, 정상하중 조건, 비정상 하중 조건, 암반의 움직임을 고려하였다. 처분조건에서 평가 결과 3가지 조건에 대해 모두 안전계수가 설계기준보다 컸다. 취급조건에서는 처분용기 취급 중 구조해석과 처분용기 낙하 사고시 구조해석을 수행하였다. 취급장비 고장 시나리오 평가결과 1개 혹은 2개의 취급 장치가 고장을 일으켰을 때도 취급장비를 계속 운전하는 것이 가능하였다. 처분용기 낙하 시나리오에서는 계산결과 최대 응력은 0.762 MPa 이었으며, 이 값은 주철의 항복응력과 비교하면 거의 무시할 수 있는 값이었다. 본 논문에서 제안한 KDC-1 처분용기에 대한 처분조건 및 취급조건에서의 구조해석 결과, 한국형처분시스템에서 고려하고 있는 조건에서 그 구조적 안전성을 확인하였다.
지진은 예보가 거의 불가능하고 짧은 시간동안 일어나 지진이 발생할 때 적극적인 대처를 할 시간적인 여유가 거의 없어 다른 자연재해에 비해 인명피해와 재산피해가 많이 발생한다. 최근 전 세계적으로 지진이 빈번하게 발생하고 있다. 이와 같이 지진의 증가에 따라 구조물의 안전성 확보에 대한 연구가 활발히 진행되고 있지만 상대적으로 비구조요소인 전기 시설 등에 대한 연구는 미비한 실정이다. 그리고 현재 국내의 전기설비는 지진에 대한 안전설계를 하지 않는 경우가 많아 지진이 발생했을 때 손상에 매우 취약하다. 따라서 본 연구에서는 ABAQUS를 통해 실제 수배전반과 유사하도록 모델링을 하였고 자연지진파를 이용하여 3D 동적비선형해석을 수행하였다. 송변전설비 내진설계 실무지침서의 지진구역I과 보통지반암 조건에 따르면 기능수행수준의 최대응답가속도는 0.157g이다. 하지만 본 연구에서 일반적인 수배전반에 대한 해석결과의 0.1g에서 한계상태 도달비율은 30%로 안전하다고 볼 수 없다. 그리고 해석결과를 통해 지진취약도를 도출하고 분석하였다. 도출된 지진취약도는 수배전반의 한계상태를 판별하는 정량적 근거로 제시하고 이와 관련된 연구의 기초자료로 활용되는데 목적을 가지고 있다.
Purpose - This article aims to examine whether the stock issuance of firms in the retail industry follows Myers' (1984) pecking order theory, which is based on information asymmetry. According to the pecking order model, firms have a sequence of financing decisions, of which the first choice is to use retained earnings, the second one is to get into safe debt, the next involves risky debt, and the last involves finance with outside equity. Since the 2000s, the polarization of the LEs (Large enterprises) and SMEs (Small and Medium Enterprises) arose in the retail industry. The LEs exhibited an improvement in growth and profitability, whereas SMEs had a tendency to degenerate. This study contributes to corroborating the features of financing decisions in the retail industry distinguished from the other industries. Research design, data, and methodology - This study considers the stocks listed on the KOSPI and KOSDAQ markets from 1991 to 2013, and is more concentrated on the stocks in the retail industry. The data were collected from the financial information company, WISEfn. The empirical analysis is conducted by employing two measures of net equity issues (and), which were introduced in Fama and French (2005), and can be calculated from firms' accounting information. All variables are generated as the aggregate value of the numerator divided by aggregate assets, which, in effect, treats the entire sample as a single firm. Substantially, the financing decisions of the firms were analyzed by examining how often and under what circumstances firms issue and repurchase equity. Then, this study compares the features of the retail industry with those of the other industries. Results - The proportion of sample firms that show annual net stock issues reaching the level of the year's average was 54.33% for the 1990s, and fell to 39.93% per year for the 2000s. In detail, the fraction of the small firms actually increases from 45.08% to 51.04%, whereas that of large firms shows a dramatic decline from 58.94% to 24.76%. Considering the fact that the large firms' rapid increase in growth after the 2000s may lead to an increase in equity issues, this result is rather surprising. Meanwhile, net stock repurchases of assets are considerably disproportionate between the large (-50.11%) and the small firms (-15.66%) for the 2000s. Conclusions - Stock issuance of retail firms is not in line with the traditional seasoned equity offering based on information asymmetry. The net stock issuance of the small firms in the retail industry can be interpreted as part of an effort to reorganize business and solicit new investment to resolve degenerating business performance. For large firms, on the other hand, the net repurchase can be regarded as part of an effort to rearrange business for efficiency and amplifying synergy across business sections through spin-off. These results can help the government establish a support policy on retail industry according to size.
ICT기반의 융합산업인 스마트 헬스케어 시스템은 건강관리부터 원격진료 범위에 걸쳐 다양한 산업분야의 핵심 연구주제이다. 스마트 헬스케어 환경은 웨어러블 디바이스를 통하여 사용자의 심박 수, 체온, 건강상태 등과 같은 생체정보를 주치의가 있는 병원 네트워크로 전달하는 기술을 의미하며 환자의 다양한 데이터를 수집하고 복합적인 정보를 추론할 수 있는 기술은 스마트 헬스케어 기술의 핵심기술이라 할 수 있다. 그러나 환자에 대한 개인의 의료정보를 다루는 만큼 정보관리에 대한 보안위협이 있으며, 무선 네트워크 환경에서 발생하는 공격기법에 대해서 취약점이 발생할 수 있다. 그러므로 본 논문에서는 스마트 헬스케어 기반의 디바이스 접근제어를 위한 키를 생성 후 생성한 키를 활용하여 안전한 통신 프로토콜을 설계하여 스마트 헬스케어 시스템의 보안성을 강화하였다. 성능평가에서는 스마트 헬스케어 환경에서 발생하는 공격기법에 대해서 안전성 분석을 하고, 기존의 키 암호화 방식과의 보안성 및 효율성을 분석하여 기존의 암호화 방식 대비 대략 15% 향상된 수치를 확인할 수 있었다.
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.235-243
/
2002
Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.
Objective: The purpose of this study was to develop and evaluate high technology adaptive driving controls, such as mini steering wheel-lever system and joystick system, for the people with physical disabilities in the driving simulator. Background: The drivers with severe physical disabilities have problems in operation of the motor vehicle because of reduced muscle strength and limited range of motion. Therefore, if the remote control system with driver-by-wire technology is used for adaptive driving controls for people with physical limitations, the disabled people can improve their quality of life by driving a motor vehicle. Method: We developed the remotely controlled driving simulator with drive-by-wire technology, e.g., mini steering wheel-lever system and joystick system, in order to evaluate driving performance in a safe environment for people with severe physical disabilities. STISim Drive 3 software was used for driving test and the customized Labview program was used in order to control the servomotors and the adaptive driving devices. Thirty subjects participated in the study to evaluate driving performance associated with three different driving controls: conventional driving control, mini steering wheel-lever controls and joystick controls. We analyzed the driving performance in three different courses: straight lane course for acceleration and braking performance, a curved course for steering performance, and intersections for coupled performance. Results: The mini steering wheel-lever system and joystick system developed in this study showed no significant statistical difference (p>0.05) compared to the conventional driving system in the acceleration performance (specified speed travel time, average speed when passing on the right), steering performance (lane departure at the slow curved road, high-speed curved road and the intersection), and braking performance (brake reaction time). However, conventional driving system showed significant statistical difference (p<0.05) compared to the mini steering wheel-lever system or joystick system in the heading angle of the vehicle at the completion point of intersection and the passing speed of the vehicle at left turning. Characteristics of the subjects were found to give a significant effect (p<0.05) on the driving performance, except for the braking reaction time (p>0.05). The subjects with physical disabilities showed a tendency of relatively slow acceleration (p<0.05) at the straight lane course and intersection. The steering performance and braking performance were confirmed that there was no statistically significant difference (p>0.05) according to the characteristics of the subjects. Conclusion: The driving performance with mini steering wheel-lever system and joystick control system showed no significant statistical difference compared to conventional system in the driving simulator. Application: This study can be used to design primary controls with driver-by-wire technology for adaptive vehicle and to improve their community mobility for people with severe physical disabilities.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.