• 교육시설
• /
• 제21권3호
• /
• pp.29-32
• /
• 2014

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.464-464
• /
• 2001

• 화약ㆍ발파
• /
• 제17권4호
• /
• pp.51-66
• /
• 1999

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3502-3507
• /
• 2013

스카이브릿지가 연결되는 건물에 강접합될 경우에는 비정형성이 크게 되어 지진하중에 매우 불리하게 거동할 수 있다. 따라서, 마찰진자베어링(FPS)이나 납고무베어링(LRB)와 같은 연결시스템을 사용하여 스카이브릿지와 구조물을 연결하게 된다. 이러한 연결시스템은 큰 지진하중이 발생하였을 때 스카이브릿지가 연결된 건물에서 분리되어 낙교하지 않도록 신중하게 설계되어야 한다. 본 논문에서는 수직방향 인장력에대해서 저항성이 없는 마찰진자감쇠기를 이용한 연결시스템을 설계하는 과정에서 반드시 검토해야할 사항을 분석하였다. 이를 위하여 실제 시공된 누리꿈 스퀘어를 예제구조물로 선택하였고 예상되는 지진하중이 가해졌을 때 스카이브릿지 연결시스템에서 발생하는 응답을 분석하여 낙교를 방지할 수 있는 설계 프로세스를 정립하였다.

• 천문학논총
• /
• 제22권4호
• /
• pp.211-217
• /
• 2007

We have been making dual dome enclosures which are useful to track artificial space objects at SSNT (Space Science and Technology Lab.) Kyung Hee University. We verified the safety of the dome enclosures using basic design and structure analyses before manufacturing them, and then performed an optimization analysis for economic and safe systems. The dome enclosure has a fully-open type structure to smoothly operate a telescope made in the style of altazimuth mount with very fast tracking. It is also designed to be safe against extreme weather conditions. The general structure of the observatory system consists of the dual dome enclosures at the top of a container. For the structural analyses, we consider the following two methods: (1) gravitational sustain analysis - how the structure supporting the dome withstand the weight of the dome, and (2) wind load analysis that considers the effect of the wind velocity at the region where the observatory is located. The result of overall deformation is found to be less than 0.551mm and the result of equivalent stress is found to be 20.293Mpa, indicating that the dual dome system is reasonably designed. This means structurally to be safe.

• International Journal of Advanced Culture Technology
• /
• 제5권1호
• /
• pp.90-97
• /
• 2017

Nowadays, the most of commercial buildings are build-out with complex architecture and decorated with more complicated interiors of buildings so establishing intelligible escape routes becomes an important case of fire or other emergency in a limited time. The commercial buildings are already equipped with multiple exit signs and these exit signs may create confusion and leads the people into different directions under emergency. This can jeopardize the emergency situation into a chaotic state, especially in a complex layout buildings. There are many research focused on implementing different approached to improve the exit sign system with better visual navigating effects, such as the use of laser beams, the combination of audio and video cues, etc. However the digital signage system based emergency exit sign management is one of the best solution to guide people under emergency situations to escape. This research paper, propose an intelligent evacuation route GUIDE that uses the combination centralized Wireless Sensor Networks (WSN) and digital signage for people safety and avoids dangers from emergency conditions. This proposed system applies WSN to detect the environment condition in the building and uses an evacuation algorithm to estimate the safe route to escape using the sensor information and then activates the signage system to display the safe evacuation route instruction GUIDE according to the location the signage system is installed. This paper presented the prototype of the proposed signage system and execution time to find the route with future research directions. The proposed system provides a natural intelligent evacuation route interface for self or remote operation in facility management to efficiently GUIDE people to the safe exit under emergency conditions.

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.309-316
• /
• 2020

항만 진입항로 설계 시에는 선박 입출항에 따른 통항 안전성이 우선적으로 확보될 수 있도록 적정한 항로 폭이 고려되어야 한다. 통항 안전성에 요구되는 최소 항로 폭 산출은 선종별 선박의 크기와 운항 속력 등에 따라 상이하게 나타나는 조종성능을 포함한 선박 요소, 바람, 조류 및 파랑에 따른 환경적 요소, 그리고 운항자 개인별 경험과 판단력 등에 따른 인적 요소 및 해상교통량, 항해지원 시설 등의 기타 요소를 종합적으로 검토하여 결정해야 한다. 그러나, 우리나라 항로 폭 설계 기준이 국제수상교통시설협회나 미국, 일본 등의 기준과 비교할 때 단순히 선박 길이 요소만으로 산정하고 있어, 이에 대한 개선이 요구된다. 본 연구에서는 배속 선박조종시뮬레이션을 활용하여 다양한 형태의 선박 및 환경적 요소를 고려하여, 직선항로에서 일방통항에 요구되는 적정 항로 폭에 대한 평가를 실시하였다. 대표적인 연구 결과로 일반적인 운항 선속 10노트 기준 풍속 25노트의 바람과 유속 2노트의 조류, 파고 약 3 m의 파랑이 작용할 경우, 15만 GT급 크루즈선은 선박 길이(L) 대비 0.67~0.91, 1만 2천 TEU급 컨테이너선은 0.79~1.17, 30만 DWT급 원유운반선은 1.02~1.59에 해당되는 최소 항로 폭이 필요한 것으로 분석되었다. 해당 결과는 우리나라 항로 설계기준의 개선 필요성 및 선박 대형화에 따른 통항 안전성 확보에 요구되는 최소 항로 폭 결정 등에 직접적으로 활용이 가능할 것이라 판단된다.

• 전자공학회논문지A
• /
• 제30A권9호
• /
• pp.1-5
• /
• 1993

The surge impedance of grounding systems must be accurately computed for a safe grounding design. Specifically, the case of radio relay station in a mountaintop region is required special design method using transient analyses. To approach these design objectives, this paper presents an algorithm to compute the surge impedance of two or more grounding systems using the Laplace Transform technique and deals with the analysis of the transient characteristics on grounding systems. Also, simulation results are compared with the measured data to prove the validity of the algorithm.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.234-240
• /
• 2014

Driving-related injuries associated with elderly drivers are on the rise, although the overall rate of driving-related injuries has decreased. To determine the causes of this trend, we researched existing vehicle systems that use different sensors and signals to promote safe driving. We found that although the systems alert drivers to potential collisions and assist them in finding a location easily, they were created by people who rarely use the systems in their daily lives. For the most part, they're not created by people with driving difficulties caused by health problems, which in turn often afflict the elderly. To address this issue, we analyzed the drawbacks of the current systems and used a focus group of people with body conditions that have declined due to age to discover the problems they encounter while driving. With the focus group, we used diverse research activities, such as observation and interview to demonstrate how new system concepts could be developed for the elderly. Finally, we propose that adequate system concepts for the elderly would improve driving safety and provide a more enjoyable driving environment for this population.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.401-407
• /
• 2012

The recent manufacturing process in the thin wafers and flat panel necessitate new approaches to reduce handling fragile and surface-sensitive damage of components. This paper presents a new pneumatic levitation for non-contact handling of parts and substrates. This levitation can achieve non-contact handling by blowing air into an air pressure pick-up head with radial passages to generate a negative pressure region. Negative pressure is caused by the radial air flow by nozzle throat and through holes connecting to the bottom region. The numerical analysis deals with the levitational motion with different design factors. The dynamic motion is examined in terms of force balance(dynamic equilibrium) occurring to the flow field between two objects. The stable equilibrium position and the safe separation distance are determined by analyzing the local pressure distribution in the fluid motion. They make considerable design factors consisting the air pressure pick-up head. As a result, in case that the safe separation distance is beyond 0.7mm, the proposed pick-up head can levitate stably at the equilibrium position. Furthermore, it can provide little effect of torque, and obtain more wide picking region according to the head size.