• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.480-488
• /
• 2000

Cabbage is the most important vegetables in korea. The cabbage production was based on arduous human labor. A comprehensive research for substituting the human work by machines has been performed at present. In general, cabbage is cultivated on hillside in korea. The harvested cabbage in a field and carrying it to a vehicle for transportation are very laborious work. Hand labor in cabbage transportation to the market damages the quality of cabbage and is also a cause to increase the cost of cabbage production. This study was to design and evaluate a prototype cabbage loader for deserving efficient and safe transportation of cabbage. The developed cabbage loader was a semi-tracked vehicle operated by a hydraulic system, allowing the safe transporting and the loading of cabbage in a steep field. The maximum loading capacity of the loader was 1.0 ton. By using safety devices attached to the loader, the static slopes were 34.0% and 37.4% for the left and the rear roll-over, respectively. The maximum field speed was about 6km/hr with two cabbage pallets of 750kg at a 25% inclined field. The field capacity was about 35 pallets/hr in case of picking up, carrying and unloading two cabbage pallets. The field efficiency of the loader was analyzed to be more than 8 times in comparison of the conventional human labor. The developed loader would be applied for loading and carrying the other vegetables due to the similarity of operations. The study suggested a standard approach to the design of field machines operated in a steep field.

• Steel and Composite Structures
• /
• v.4 no.6
• /
• pp.471-487
• /
• 2004

Modular steel scaffolds are commonly used as supporting scaffolds in building construction, and traditionally, the load carrying capacities of these scaffolds are obtained from limited full-scale tests with little rational design. Structural failure of these scaffolds occurs from time to time due to inadequate design, poor installation and over-loads on sites. In general, multi-storey modular steel scaffolds are very slender structures which exhibit significant non-linear behaviour. Hence, secondary moments due to both $P-{\delta}$ and $P-{\Delta}$ effects should be properly accounted for in the non-linear analyses. Moreover, while the structural behaviour of these scaffolds is known to be very sensitive to the types and the magnitudes of restraints provided from attached members and supports, yet it is always difficult to quantify these restraints in either test or practical conditions. The problem is further complicated due to the presence of initial geometrical imperfections in the scaffolds, including both member out-of-straightness and storey out-of-plumbness, and hence, initial geometrical imperfections should be carefully incorporated. This paper presents an extensive numerical study on three different approaches in analyzing and designing multi-storey modular steel scaffolds, namely, a) Eigenmode Imperfection Approach, b) Notional Load Approach, and c) Critical Load Approach. It should be noted that the three approaches adopt different ways to allow for the non-linear behaviour of the scaffolds in the presence of initial geometrical imperfections. Moreover, their suitability and accuracy in predicting the structural behaviour of modular steel scaffolds are discussed and compared thoroughly. The study aims to develop a simplified and yet reliable design approach for safe prediction on the load carrying capacities of multi-storey modular steel scaffolds, so that engineers can ensure safe and effective use of these scaffolds in building construction.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.155-159
• /
• 2005

Analysis target ship is not introduced yet in domestic as steel yacht that is getting into the spotlight by leisure life in Australia or Japan. Sailing yacht or Yacht for leisure time made of FRP into controlling power fare mainly and the design and made of latest fishing boat and something of domestic is consisting mainly. To need investigated for concept is various kinds overall strength as that use mainly steel wire material structurally of steel yacht by small crafts about Longi strength, Transe strength portion even of design safety factor at subject to do Rule's allowable stress enough stable structure accomplish. But it is assessment of part intensity that become refer to most in small size ship.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4147-4157
• /
• 2015

The weapon system has developed by adding various functions because of the warfare change. And, an weapon system test set (WSTS) that is used to test and judge the condition of weapon system also deal with a lot of complex information. However, almost WSTS is developed on the basis of developer-centric. Because of it, it is hard to make a result by apprehending information on WSTS's display. Thus, I proposed a new display of WSTS by adapting the Ecological Interface Design(EID) Methodology to reduce operator's cognitive workload and assure safe testing. WSTS's Display is developed through Information Requirement and Work Domain Model as a result of Work Domain Analysis. The most powerful thing in the new display is that operator can identify his testing and status of WSTS directly. I expect that it reduces operator's cognitive workload and helps safe testing.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.431-442
• /
• 2010

Because embedded system is combined system of hardware and software, we should design by considering elements such as real-time, reactive, small size, low weight, safe, reliable, harsh environment, low cost, and so on. However, those are poorly reflected on current embedded system development. Especially, there is few existed framework-based embedded system development. As a result, there are many internal codes which is not related with system operation in currently developed embedded system, and reusability or variability is not considered into embedded system development. Therefore we propose a formal specification technique using Z language to guarantee completeness or consistency of design of reusability framework proposed for improving reusability of embedded system. Also we assure correctness of framework design by checking Z model through Z-Eves Tool.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.299-310
• /
• 2022

The ability of an automated driving system is based on vehicle sensors, judgment and control algorithms, etc. The safety of automated driving system is highly related to the operational status of the road network and compliant road infrastructure. The safe operation of automated driving necessitates continuous monitoring to determine if the road and traffic conditions are suitable and safe. This paper presents a node and link system to build a road monitoring system by considering the ODD(Operational Design Domain) characteristics. Considering scalability, the design is based on the existing ITS standard node-link system, and a method for expressing the monitoring target as a node and a link is presented. We further present a technique to classify and manage hazard risk into five levels, and a method to utilize node and link information when searching for and controlling the optimal route. Furthermore, we introduce an example of system implementation based on the proposed node and link system for Sejong City.

• Journal of the Korean housing association
• /
• v.16 no.3
• /
• pp.79-87
• /
• 2005

The digitalization of our society has brought on the digitalization of housing design and human life. Thus, the concerns for developing digital home have increased. However, most of them has focused on digital technology, not human. This study was intended to examine the residents' housing needs for digital home and to suggest the design guidelines of digital home. The subjects were 400 housewives who lived and used internet in $85m^2$-sized housing unit in the new apartment complex, Busan. The important aspects in digital home design, the residents' needs for digital home design, and the needs for digital system in digital home were examined. The subjects were relatively young in their ages. Also, they had relatively high educational level and middle income. On the base of their housing needs for digital home, the design of digital home like as followings would be desirable: 1) the safe and secure design and digital system, 2) the design to improve residents' health and encourge family interaction, 3) human, warm, and soft interior mood, 4) space composition different from the existing one.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.63-70
• /
• 2016

Modern society is suffering from the phenomena of low-fertile, ultra-aging, and low-growth. On this social flow, most social classes undergo vulnerable situation and their overall housing and living condition have difficulties. So far many housing guidelines for diverse population were developed, recently, inclusive 'Customized Housing Design Guideline for Childcare Families' in terms of maintaining family and society has been completed. The purpose of this study is to analyze User Benefit Characteristics of 'Customized Housing Design Guideline for Childcare Families'. The research subjects are essential 140 guidelines appropriate to children's development and parents' care. The research method is contents analysis and the analysis criterion are 4 concepts of the User Benefit Criteria- 'Behavioral Facilitation (BF)', 'Physiological Maintenance (PhM)', 'Perceptual Maintenance (PM)', 'Social Facilitation (SF)'. 3 people inter-raters reliability was established. Altogether, the guidelines were rated in the order of PhM>PM>BF>SF, and these characteristics are similar as common universal design guidelines. This showed the supportability of spatial characteristics in the guidelines related to user's special behaviors. Also, the results show the importance of outdoor space planning for safe social interactions. The supportable characteristics of 'Customized Housing Design Guideline for Childcare Families' could be expected to efficiently apply for new housing development in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.444-451
• /
• 2015

Lifting lugs are frequently used in shipyard to transport and turn over blocks of ship and offshore structures. As the shipbuilding technology develops, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economic as well as safe design of lug structure, more rational design procedure based on the rigorous structural analysis is needed. This study is concerned with the optimum design of T type lug which is frequently used in shipyard. The optimum thickness of lug's main body is to be determined based on the results of non-linear strength analysis. As far as the present results for the present T type lugs having different capacity are concerned, it seems to be necessary to review the current design procedure of lug structure. The present design procedure can be extensively used in design of various types of lug structures used in shipyard.

• Structural Engineering and Mechanics
• /
• v.60 no.5
• /
• pp.761-779
• /
• 2016

Design of safe structures with resistance to progressive collapse is of paramount importance in structural engineering. In this paper, an efficient optimization technique is used for optimal design of steel moment frames subjected to progressive collapse. Seismic design specifications of AISC-LRFD code together with progressive collapse provisions of UFC are considered as the optimization constraints. Linear static, nonlinear static and nonlinear dynamic analysis procedures of alternate path method of UFC are considered in design process. Three design examples are solved and the results are discussed. Results show that frames, which are designed solely considering the AISC-LRFD limitations, cannot resist progressive collapse, in terms of UFC requirements. Moreover, although the linear static analysis procedure needs the least computational cost with compared to the other two procedures, is the most conservative one and results in heaviest frame designs against progressive collapse. By comparing the results of this work with those reported in literature, it is also shown that the optimization technique used in this paper significantly reduces the required computational effort for design. In addition, the effect of the use of connections with high plastic rotational capacity is investigated, whose results show that lighter designs with resistance to progressive collapse can be obtained by using Side Plate connections in steel frames.