• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.447-459
• /
• 2020

Based on the literature statistical method, the paper publication status of the isolated working face and the distribution of the rockburst coal mine were obtained. The numerical simulation method is used to study the stress distribution law of working face under different mining range. In addition, based on the similar material simulation test, the overlying strata failure modes and the deformation characteristics of coal pillars during the mining process of the isolated working face with thick-hard key strata are analyzed. The research shows that, under the influence of the key strata, the overlying strata formation above the isolated working face is a long arm T-type spatial structure. With the mining of the isolated working face, a series of damages occur in the coal pillars, causing the key strata to break and inducing the rockburst occurs. Combined with the mechanism of rockburst induced by the dynamic and static combined load, the source of dynamic and static load on the isolated working face is analyzed, and the rockburst monitoring methods and the prevention and control measures are proposed. Through the above research, the occurrence probability of rockburst can be effectively reduced, which is of great significance for the safe mining of deep coal mines.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.98-101
• /
• 1996

Background: Lumbar epidural steroid injection for relief of low back pain and sciatica has become a popular procedure. further, cervical epidural steroid injection with nerve block (CESNB) is known to be effective for the management of acute and chronic pain of neck, shoulder and arm. However, many anesthesiologists are not familiar with CESNB. Methods: Charts of 34 patients who had undergone 60 cervical epidural steroid injections over a three year period, 1993 to 1995, were reviewed. We studied the followings: initial visit and department, injected interspaces, personal characteristics, indications for injection and complications. Results: Patients' first visits were mainly to orthopaedics (11 patients) and neurosurgery (10 patients). Epidural injection sites were: C7-T1 interspace (29 patients) and C6-C7 interspace (6 patients). Mean age of patients were 50.1 years. range 21~73 years. There were twenty male and fourteen female patients. Complications varied from dizziness after CESNB (1 patient). loss of consciousness with transient apnea (2 patients), and local infection with suspicious meningitis (1 patient). Conclusion: We conclude from the above data that CESNB is a good, safe and conservative form of therapeutic procedure in the management of patients suffering from cervical radiculopathy, and neck and shoulder pain.

• Korean Journal of Acupuncture
• /
• v.34 no.4
• /
• pp.185-190
• /
• 2017

Objectives : The research was conducted for the use of HT1 in the shoulder disease through correct acupuncture. Methods : (1) The contents were compared through reviewing literature. (2) The literature was studied in conjunction with the shoulder pathology and anatomical structures. Results : (1) The location of HT1 is described as 'in the axilla, over the axillary artery' in many literature, and the depth of HT1 is as shallow as 1 cm. The WHO standard also follows this. (2) There were many references to 'in the axilla, between the big muscles' in later generations, but there were mixed opinions about the exact muscle names. Based on the acupunctural review and the musculoskeletal study, the big muscles are considered to be 'Pectoralis major' and 'Latissimus dorsi'. (3) Among the muscles constituting the rotator cuff, applying acupuncture on HT1 is essential for 'Subscapularis m.'. Therefore, it is effective to stimulate 'Subscapularis m.' to a depth of 1.5 to 4 cm. Conclusions : The accurate acupoint of HT1 enables various uses of flank, armpit, shoulder and arm diseases as well as cardiopathy. Especially, it helps to treat the muscles through safe and effective acupuncture in shoulder rotator cuff disorder.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.426-433
• /
• 2010

This study was conducted to develop a pull-type sprayer which performs the safe spraying with improved ergonomic postures while pesticide spraying of roses in floricultural facilities. The performance of the ergonomically designed sprayer was analyzed with a comparison of a conventional spray method. The pull-type sprayer, consisting of power pump, hose and nozzle parts was designed to manually pull and spray to upward and horizontal directions. From the analysis of postures with the RULA method, the labor load to arm and wrist using the pull-type sprayer was less than that with conventional power sprayer, so that the intensity of labor reduces. Working capacity with pull-type sprayer was two-fold greater than the conventional power sprayer. After performing pesticide spraying with the pull-type sprayer, the operating cost was reduced to \585,000/yr, which is 79% less than that of cost (\2,197,500/yr) for using conventional power sprayer.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.659-666
• /
• 2009

Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.130-132
• /
• 2019

Acupuncture is generally regarded as a safe procedure and as a popular treatment for patients with musculoskeletal disorders. We report a case of a 47-year-old male patient with late-onset tetraplegia, developed after acupuncture. He had no trauma, medical, and social history relevant to tetraplegia. Right after the acupuncture, he felt discomfort in his right arm. After 6 days, all 4 extremity weakness developed. Whole-spine magnetic resonance imaging revealed the presence of spinal subdural hematoma extending from the C5 vertebra to the coccyx level. Hand coordination dysfunction, neurogenic bladder, and neuropathic pain were other symptoms. After the management, he recovered muscle strength, but incomplete bladder control and neuralgia were sustained. It is important to be aware of the possibilities of severe complications after acupuncture.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.36 no.4
• /
• pp.70-87
• /
• 2023

Objectives : The purpose of this research is to review the efficacy and safety of taping therapy for facial palsy. Methods : Two foreign databases(Pubmed, CNKI) and one domestic database(OASIS) were used to search, and papers retrieved from the starting point of literature provision in each database until June 19, 2023 were included in the study. All studies in which other treatments were performed as a treatment intervention along with taping therapy were included, but cases where taping therapy was a comparative intervention were excluded. Results : 18 studies were selected. 14 studies were two-arm randomized controlled trials(RCT), and 4 studies were case reports. There was improvement in facial palsy in all 4 case reports, and in all 14 RCTs, the treatment effect in the observation group was significantly higher than in the control group. Conclusions : Taping therapy can be an effective and safe treatment method for facial palsy. However, the risk of bias in the selected studies was high, and there were many cases in which multiple interventions other than taping therapy were applied simultaneously. Therefore, well-designed studies with high quality are needed in the future.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.50-50
• /
• 2003

본 연구에서는 행성 근접통과(Gravity Assist, Swingby, Flyby)를 이용한 행성간 탐사선의 궤도를 설계할 수 있는 알고리즘 개발을 자체적으로 수행하였다. 미 항공우주국(NASA)에서는 이를 이용한 행성간 탐사선의 궤도에 관한 연구를 이미 1950년대부터 시작하여 왔으며, 1973년 Mariner 10호가 한번에 두 행성, 금성과 수성을 탐사하는데 성공하였다. 행성간 임무에 있어서 행성 근접통과를 적절하게 이용한다면 임무 수행시 요구되는 에너지를 최소화 시킬 수 있어 발사비용의 절감효과와 함께 한번의 발사로 여러 행성의 탐사가 가능하여 임무의 효율성을 증대 시킬 수 있다. 행성 근접통과를 이용한 행성 탐사선의 궤도설계를 위해서는 근접 통과하는 행성(Flyby planet)에서의 진입속도벡터( $V_{\infty}$$^{ -}$) 및 출발속도벡터( $V_{\infty}$$^{+}$)의 크기, 근접 통과시의 비행 고도(Flyby altitude), 근접 통과 행성과의 충돌여부 분석(B-plane analysis), 최종적으로 도착하고자 하는 행성(Target planet)의 위치 등 많은 제한조건이 고려되어야 한다. 연구된 알고리즘의 결과를 미 항공우주국 (NASA)의 임무였던 Mariner 10호의 결과와 비교하여 보았으며, 우리나라가 향후 목성으로 탐사선을 보낸다고 가정하였을 경우, 행성 근접통과를 이용한 탐사선의 발사시기(Launch Window), 요구되는 발사 에너지(C3)값, 그리고 각각에 따른 궤적들을 산출하여 보았다. 이미 기술 개발을 완료한 국가들이 관련 기술의 제휴를 기피하고 있는 현 상황에서 이와 관련된 연구는 우주개발의 시대를 열고 있는 우리나라의 우주개발관련 기초 기술 분야를 위해 선행 연구되어야 할 부분이다. 기초 기술 분야를 위해 선행 연구되어야 할 부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.62-62
• /
• 2003

과학위성 1호에는 위성의 임무를 수행하기 위하여 광학계, 구조부, 및 전자부 등 여러가지 부품들이 실장되는데, 그 중 전자부의 가장 중요한 부품 중의 하나인 인쇄회로기판(Printed Circuit Board, PCB)의 우주환경에서의 특성 대해서 논의하고자 한다. Solder Resistor(Solder Mask)의 화학성분이 위성체가 작동하는 우주환경에서 위성체 임무수행 시 발생할 수 있는 out-gassing으로 인해 위성체가 본연의 임무 실패라는 결과를 초래할 수 있다 NASA 및 ESA의 Out-gassing에 관한 규정과 TRW에 의한 KOMSAT에 사용된 재료의 진공상태의 Outgassing에 관한 내용에 의하면, 재료의 진공상태와 Out-gassing은 America Society for Testing and Materials에서 제시한 ASTM E959 기준에 따라 제작된다. 일반적으로 우주 환경에서 광학계나 전자부의 원활한 동작을 위해서는 인쇄 회로 기판의 총 질량손실(Total Mass Loss, TML)은 1.00%을 넘지 말아야 하며, 휘발성 응축 질량 (Collected Volatile Condensable Mass, CVCM)은 0.1% 미만이어야 한다. Total Mass Loss(TML) 방법은 대기중에서 측정한 질량과 진공 조건에서 변화되는 질량을 측정함으로써 진공조건에서의 탈기체 특성을 측정하는 방법이다. 본 연구에서는 Solder Resistor(Solder Mask)의 탈기체 측정을 위한 진공챔버의 측정방법 및 진공 형성 과정을 기술하고 실제 과학위성1호에 장착될 시료를 예로 들어 인쇄회로기판에 입힌 Solder Resistor(Solder Mask)가 우주환경인 진공상태에서 위성체 부품의 작동 시 발생할 수 있는 탈기체되는 정도를 질량의 변화분으로 측정하여 위성체가 우주 환경에서 본연의 임무를 안전하게 수행할 있는지를 검증하였다.부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로

• Research in Community and Public Health Nursing
• /
• v.8 no.1
• /
• pp.31-44
• /
• 1997

The purpose of this study was to measure and determine the relationship of femoral neck and lumbar bone mineral density with their and related factors. It were measured and determined the relationships among bone mineral density, bone mineral content in the lumbar and femoral neck, muscle strength (arm, back, leg), muscle endurance, instrumental activity of daily living (IADL), quality of life, cognitive perceptual variables(self efficacy, perceived health status), age, age at menopausal period. The twenty five subjects participating in this study consisted of twelve males and thirteen females at a C-institution in Chung Buk province. The mean age of subjects was 73.64 years. The data was collected from August, 1993 to September, 1993. The data was analyzed with $x^2-test$, t-test, Correlation, multiple regression using a SPSS pc+ program. 1. The mean femoral neck bone mineral density was $0.636g/cm^2$, 66.7% of young bone mineral density, the mean lumbar($L_2-L_4$) bone mineral density was $0.807g/cm^2$, 79.86% of young bone mineral density. The mean fermoral neck bone mineral content was 2.906g and the mean lumbar bone mineral content was 36.898g. 2. The mean muscle strength was 17.14kg(grip strength), 32.05kg(back lift strength), 17.14kg (leg lift strength) and the mean muscle endurance was 9.92times. 3. Men showed a significantly higher score (p<0.01) in muscle strength and muscle endurance than women, as well as a significantly higher score on self efficacy and perceived health status(p<0.05). 4. The femur neck bone mineral density had a significant correlation(p<0.0l) with leg lift strength, back lift strength, and their was a significant correlations (p<0.05) with arm strength and muscle endurance. Lumbar ($L_2-L_2$) bone mineral density had a significant correlation(p<0.05) with muscle endurance, grip strength and IADL. 5. With the multiple regression analysis the most significant predictor for lumbar bone mineral density were IADL, the most significant predictor for femoral neck bone mineral density was leg strength. This study concluded: As the mean bone mineral density and bone mineral content were low, the aged showed osteopenia. Bone mineral density, muscle strength and IADL were correlated. The aged could pro mote muscle strength, bone mineral density and IADL through Leg Press exercise which was safe and efficient for the aged. This Leg Press exercise contributed to prevention of osteoporosis and promoted the health of the aged.