• 한국운동역학회지
• /
• 제17권2호
• /
• pp.1-9
• /
• 2007

Walking is not only an essential component of the human mobility, but also is a good exercise. Inability to walk freely can reduce an individual's quality of life and independence substantially. Being a relatively low impact activity, walking is particularly good for the elderly and research has shown that regular walking in the elderly reduces the chance of fall-related injuries and mental diseases as well. In spite of the documented benefits of regular walking, it is still difficult to walk without the aid of assistive devices for the frail elderly who have lower extremity problems. Assistive walking devices(AWD), such as crutches, canes, hiking-poles, T-Poles and walkers, are often prescribed to the elderly to make their walking be safe and efficient. Many researchers have demonstrated the effects of AWDs such as reducing lower extremity loading, improved dynamic/gait stability, yet, no study has been done for gait pattern when the elderly gait with AWDs. Therefore, the purpose of this study was to examine whether T-Poles, one of the AWDs, change the elderly gait pattern. Eight community-dwelling female elderly participated in this study. Laboratory kinematics during walking with T-Poles(PW) and with out T-Poles(NPW) was assessed. PW showed significant increase in step width, stride length, gait velocity and decrease in swing time. No significances were found in lower body joint angles but meaningful trend and pattern were found. Maybe the reason was due to the participants. Our participants were healthy enough so that the effect of T-Poles was minimum. PW also showed typical gait phases which are no single support phase during a gait cycle. It indicates that walking with T-Poles may guarantee safe and confident walking to the frail elderly.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.19-25
• /
• 2013

용접에 의한 가스설비, 교량, 선박 등 강 구조물의 접합 방법은 대부분 십자형이나 T형의 필릿 용접으로 이루어지며 구조물의 형상과 용도에 따라 완전 용입 또는 불완전 용입 상태로 이루어진다. 본 연구에서는 십자형 필릿용접 구조물에 대하여 재료 두께별 용입 깊이에 따른 피로 균열 특성을 파악하였고, 그 결과로부터 무한수명 영역내에서의 안전 설계응력에 대하여 고찰하였다. 미 용입 길이가 길면 루트 부 파괴가 되어 무한 수명 영역은 작고 미 용입 길이가 짧으면 토우부 파괴가 되어 무한 수명 영역은 크게 나타났다. 3층 용접한 재료 두께 20mm의 경우가 2층 용접한 재료 두께 10mm, 15mm의 경우보다 미세한 페라이트 침상 조직을 더 많게 형성시켜 노치 인성을 증가시키므로 서 피로강도와 무한 수명을 더 향상시킨 것으로 나타났다.

• 한국임상약학회지
• /
• 제5권2호
• /
• pp.51-60
• /
• 1995

Obesity is defined as excessive storage of energy in the form of fat resulting in adverse effect on healthy and longevity. Some data have shown increased incidence of hypertension, diabetes, hypercholesterolemia in overweight individuals and other disorders such as joint disease, cancer have been also associated with obesity. Recently, various commercial diet programs have been introduced for weight reduction without scientific evaluation for clinical effect and safety. The diet program must be based on a sound and scientific rationale and also be safe and nutritionally adequate. Pulmuone $diet^{(R)}$ is a calorie-restricted commercial diet-food, which contains adequate nutritients. The efficacy and safety of Pulmuone diet were evaluated in 28 normal healthy obese females in a prospective study. Each volunteer was placed in 3-week diet program. To observe weight reduction effect, body weight, TSF and AMC were measured every week. To account for safety of this program, blood chemistry test, blood pressure and side effects were monitored every week. Mean body weight was reduced by 3.24kg following diet program, which is statistically significant(P < 0.05) and this weight reduction was related to reduction in fat weight and not muscle weight as shown by the results of TSF and AMC Blood chemistry was not influenced by this program, but blood pressure was significantly reduced following this program. Thought diet program was generally well tolerated in most volunteers, the most frequent side effects are constipation, dizzness and headache. In conclusion, Pulmuone $diet^{(R)}$ program seems to be safe and effective for weight reduction in normal healthy obese females.

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.75-81
• /
• 2007

The concrete pavement of the Seohae Highway in Korea has suffered from serious distress, only four to seven years after construction. Deterioration due to Alkali-Silica Reaction (ASR) has seldom been reported per se in Korea, because the aggregate used for the cement concrete has been considered safe against alkali-silica reaction so far. The purpose of this study is to examine the deterioration caused by an alkali-silica reaction of concrete pavement in Korea. The investigation methods included visual inspection and Automatic Road Analyzer (ARAN) analysis of surface cracks, coring for internal cracks, stereo microscopic analysis, scanning electronic microscope (SEM) analysis, and electron dispersive X-ray spectrometer (EDX) analysis. The results are presented as follows: the crack pattern of the concrete pavement in Korea was longitudinal cracking, map cracking or D-cracking. Local areas of damage were noticed four to five years after construction. The cracks started from edges or joints and spread out to slabs. The most intensive cracking was observed at the intersection of the transverse and longitudinal joints. Where cracking was the most intense, pieces of concrete and aggregate had spalled away from top surface and joint interface area. The progress of deterioration was very fast. The reaction product of alkali-silica gel was clearly identified by its generally colorless, white, or very pale yellow hue seen through a stereo optical microscopy. The typical locations of the reaction product were at the interface between aggregate and cement paste in a shape of a rim, within aggregate particles in the cracks, and in the large void in the cement paste. Most of the white products were found at interface or internal aggregates. SEM and EDX analysis confirmed that the white gel was a typical reaction product of ASR. The ASR gel in Korea mainly consisted of Silicate (Si) and Potassium (K) from the cement. The crack in the concrete pavement was caused by ASR. It seems that Korea is no longer safe from alkali-silica reaction.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.108-115
• /
• 2009

In metal forming technologies, the stamping process is one of the significant manufacturing processes to produce sheet metal components. It is important to design stamping process which can produce sound products without defect such as fracture and wrinkle. The objective of this study is to propose the feasible formability diagram which denotes the safe region without fracture and wrinkle for effective design of stamping process. To determine the feasible formability diagram, FE-analyses were firstly performed for the combinations of process parameters and then the characteristic values for fracture and wrinkle were estimated from the results of FE-analyses based on forming limit diagram. The characteristic values were extended through training of the artificial neural network. The feasible formability diagram was finally determined for various combinations of process parameters. The stamping process of turret suspension to support suspension module was taken as an example to verify the effectiveness of feasible formability diagram. The results of FE-analyses for process conditions within fracture and wrinkle as well as safe regions were in good agreement with experimental ones.

• 한국수산과학회지
• /
• 제45권5호
• /
• pp.454-459
• /
• 2012

To investigate heavy metals (Hg, Pb and Cd) and their potential health risks in commercial dried laver (Porphyra sp.), we collected 45 samples from the major production areas on the western and southern coasts of Korea (Hwaseong, Seocheon, Gunsan, Muan, Shinan, Jindo, Haenam, Wando, Jangheung, Goheung and Busan). The Hg, Pb and Cd concentrations were measured using inductively coupled plasma spectrometry (ICP-MS) or a mercury analyzer. The average Hg, Pb and Cd concentrations in the dried laver were $0.006{\pm}0.0017$, $0.196{\pm}0.0614$ and $0.894{\pm}0.4882$ mg/kg, respectively. Based on the 2007 Korean Public Nutrition Report, these levels are 0.02, 0.11 and 2.47% of the provisional tolerable weekly intake (PTWI) for Hg, Pb and Cd, respectively, established by the FAO/WHO. The hazard quotient (HQ) determined from the ratio of exposure and safe levels were less than 1.0. Therefore, the levels of overall exposure to Hg, Pb and Cd for dried laver were below the recommended JECFA (Joint FAO/WHO Expert Committee on Food Additives) levels, which indicate safe levels for public health.

• 농업과학연구
• /
• 제23권1호
• /
• pp.1-12
• /
• 1996

암반사면의 안정성 검토는 암반내에 존재하는 불연속면의 물리적인 특성에 의하여 좌우되므로 암반에서 불연속연의 공학적 특성을 파악하는 것이 중요하다. 현재 암반사면의 경사도는 경험적인 요소들에 의하여 결정되거나 암석강도에 의한 표준경사 기준을 적용하고 있는 실정이나 이러한 기준은 절취사변의 풍화정도와 불연속면의 발달상태를 고려하지 않고 사변경사가 결정되기 때문에 사면 붕괴 발생의 위험이 항상 내재되어 있다. 따라서, 안전하고 합리적인 암반절취사면의 설계를 위하여 강원도 지역 도로의 암반사면 6개소를 분석하여 다음과 같은 결론을 얻었다. 1. 절리가 발달된 암반사면을 대상으로 평사투영법에 의하여 안전성을 분석한 결과, 현재와 같이 절리를 고려하지 않는 암반의 표준구배로 설계된 사면은 모두 불안하게 나타났다. 2. 강우와 사면붕괴와의 관계에서 최대시우량이 20mm이상이고 2일 연속강우량이 200mm이상일 때 사면붕괴의 위험성이 높은 것으로 나타났다. 3. 사면설계에서는 대표적인 불연속면의 공학적인 특성을 고려하여 평사투영법을 실시하고, 평사투영법에 의해 불안정한 것으로 판단된 사면은 한계평형식을 이용하여 정밀분석하는 것이 바람직하다. 4. 암반사면의 설계는 강도에 의한 것보다는 암반의 불연속면(절리, 층리, 단층)등을 고려하여 설계하는것이 바람직하다.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.178-184
• /
• 2012

This paper presents a transformable track mechanism for wall climbing robots. The proposed mechanism allows a wall climbing robot to go over obstacles by transforming the track shape, and also increases contact area between track and wall surface for safe attachment. The track mechanism is realized using a timing belt track with one driving actuator. The inner frame of the track consists of serially connected 5R-joints and 1P-joint, and all joints of the inner frame are passively operated by springs, so the mechanism does not require any actuators and complex control algorithms to change its shape. Static analysis is carried out to determine design parameters which enable $90^{\circ}$ wall-to-wall transition and driving over projected obstacles on wall surfaces. A Prototype is manufactured using the transformable track on which polymer magnets are installed for adhesion force. The size of the prototype is $628mm{\times}200mm{\times}150mm$ ($Length{\times}Width{\times}Height$) and weight is 4kgf. Experiments are performed to verify its climbing capability focusing on $90^{\circ}$ wall to wall transition and driving over projected obstacle.

• 대한물리의학회지
• /
• 제11권4호
• /
• pp.147-156
• /
• 2016

PURPOSE: The purpose of this study was to investigate the effects of sensory motor training using ball exercise on shoulder range of motion, pain, dysfunction, and quality of life in Breast Cancer Women after Mastectomy. METHODS: A total of 26 patients from D University Hospital in Daejeon were included and randomly allocated to two groups (n=13 per group). The two groups performed the exercise five times a week for 4 weeks. A sensory motor training group (SMTG) received general physical treatment for 10 minutes and sensorimotor training for 20 minutes. A control group (CG) received general physical therapy for 30 minutes. Shoulder pain (the Visual Analog Scale), range of motion, disability (the shoulder pain and disability index) and quality of life (the Functional Assessment Cancer Therapy-Breast instrument) were measured in both groups before and after 4-weeks intervention. RESULTS: A significant difference was found in joint range of motion, shoulder pain, functional disability level, and quality of life within the two groups (p <.05). In addition, changes in joint range of motion, pain, functional disability level, and quality of life after then intervention were significantly different between the two groups (p <.05). CONCLUSION: These results suggest that a sensory motor training program is feasible, safe, and suitable exercise for shoulder functions and quality of life in Breast Cancer Women after Mastectomy.

• 유통과학연구
• /
• 제14권10호
• /
• pp.137-146
• /
• 2016

Purpose - Korean agriculture is facing internal and external environmental changes and the need for secure stable outlets. Active participation and mutually beneficial cooperation between enterprises and agricultural is necessary for a win-win situation. This study investigates the case for distribution cooperation and a cooperative system. To respond to the diverse needs of consumers and market reclamation, there is a need to analyze and categorize distribution cooperation. Research design, data, and methodology - A literature study, relevant interviews with enterprises, and meetings with local government practices were conducted. A survey frame was derived through the participation of agricultural enterprises and distribution cooperation models were categorized identifying win-win cooperation and best practices. It was organized on the basis of six best practice examples of distribution cooperation between industry and agricultural sectors, divided into three types: opening distribution channels, exporting cooperation, and developing new products. Results - An innovation management system that can adapt to environmental changes and problems of agriculture is necessary. A company has to supply high-quality agricultural products reliably to meet the preferences of consumers by introducing products that promote domestic market differentiation. In addition, consumers are choosing a variety of products that may include not only high quality products but also local products and safe products. The main areas of cooperation are the direct provision of agrifood raw materials to consumers. Next, would be to help agricultural sectors distribute and pioneer international markets. The ideal step for distribution cooperation is the joint investment in new products by business and agriculture. Conclusions - Agriculture and win-win cooperation with enterprises is in an early stage of social contribution. To implement a distribution cooperation model between business and agricultural sectors, it is crucial to establish a structured support system including joint councils. Additional requirements include strengthening agricultural capacities, creating a legal basis for provision, and producing a win-win cooperation environment. The promotion of win-win cooperation and agricultural enterprises needs to exist in various forms in order to establish a different type of incentive system.