• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.2
• /
• pp.166-172
• /
• 1998

Missing of the upper posterior dentition can cause alveolar bone resorption & pneumatization of Maxillary sinus wall, which makes traditional implant placement impossible, The solution includes various methods to the posterior maxilla to provide adequate bone support for implant installation and long-term survival. -- sinus floor elevation, sinus-lift graft, inlay graft using LeFort I osteotomy, onlay graft, This is a clinical Sr. retrospective study on implant surgery & prosthodontic restoration with upper edentulous posterior jaw from Jan. 1990. to Jun. 1997 at implant clinic of Chonbuk National University Hospital. The results obtained were as follows: 1. Six hundred ninety-nine implants were placed on upper posterior jaw of two hundred seventeen patients, among them one hundred sixty-five implants were placed in forty-four patients with sinus lift. 2. The height of the remained alveolar bone was classified on the base of Misch's concept. This included seventy-nine SA-1s, ninety-seven SA-2s, sixty-five SA-3s and sixty SA-4s. 3. Ninety percent of implants were successfully integrated in non-grafted area and eighty-seven percent of implants were successully integrated in sinus lift area.

• International Journal of Oral Biology
• /
• v.42 no.3
• /
• pp.91-97
• /
• 2017

Although anti-aging activities of melatonin, a hormone secreted by the pineal gland, have been reported in senescence-accelerated mouse models and several types of cells, its impact and mechanism on the senescence of human dental pulp cells (HDPCs) remains unknown. In this study, we examined the impact of melatonin on cellular premature senescence of HDPCs. Here, we found that melatonin markedly inhibited senescent characteristics of HDPCs after exposure to hydrogen peroxide ($H_2O_2$), including the increase in senescence-associated ${\beta}$-galactosidase (SA-${\beta}$-gal)-positive HDPCs and the upregulation of p21 protein, an indicator for senescence. In addition, as melatonin attenuated $H_2O_2$-stimulated phosphorylation of c-Jun N-terminal kinase (JNK), while selective inhibition of JNK activity with SP600125 significantly attenuated $H_2O_2$-induced increase in SA-beta-gal activity. Results reveal that melatonin antagonizes premature senescence of HDPCs via JNK pathway. Thus, melatonin may have therapeutic potential to prevent stress-induced premature senescence, possibly correlated with development of dental pulp diseases, and to maintain oral health across the life span.

• The Plant Pathology Journal
• /
• v.37 no.4
• /
• pp.356-364
• /
• 2021

This study was to investigate defense mechanisms on cassava induced by salicylic acid formulation (SA) against anthracnose disease. Our results indicated that the SA could reduce anthracnose severity in cassava plants up to 33.3% under the greenhouse condition. The 𝛽-1,3-glucanase and chitinase enzyme activities were significantly increased at 24 hours after inoculation (HAI) and decrease at 48 HAI after Colletotrichum gloeosporioides challenge inoculation, respectively, for cassava treated with SA formulation. Synchrotron radiation-based Fourier-transform infrared microspectroscopy spectra revealed changes of the C=H stretching vibration (3,000-2,800 cm^-1), pectin (1,740-1,700 cm^-1), amide I protein (1,700-1,600 cm^-1), amide II protein (1,600-1,500 cm^-1), lignin (1,515 cm^-1) as well as mainly C-O-C of polysaccharides (1,300-1,100 cm^-1) in the leaf epidermal and mesophyll tissues treated with SA formulations, compared to those treated with fungicide carbendazim and distilled water after the challenged inoculation with C. gloeosporioides. The results indicate that biochemical changes in cassava leaf treated with SA played an important role in the enhancement of structural and chemical defense mechanisms leading to reduced anthracnose severity.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.11-14
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various $Ar/O_2$ ratio. We investigated the effect of deposition condition(specially $Ar/O_2$ ratio) on the structural properties of SBN thin film. As $Ar/O_2$ ratio was increased, the peaks in the XRD pattern became more sharp. Also, the peaks(008)(115)(220) in 80/20 of $Ar/O_2$ ratio were suddenly appeared. The optimum of the rougness showed about 4.33 nm in 70/30 of $Ar/O_2$ ratio. The crystallinity of SBN thin films were increased with the increase of $Ar/O_2$ ratio. Also, Deposition rate of SBN thin films was about 4.17 nm/min in 70/30 of $Ar/O_2$ ratio. The capacitance of SBN thin films were increased with the increase of $Ar/O_2$ ratio.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.221-226
• /
• 2010

Quartz crystal microbalance (QCM) gas sensor to detect methyl mercaptan ($CH_3SH$) gas was fabricated by depositing $TiO_2$ nanoparticles and polyelectrolyte on the electrode of QCM. The $TiO_2$/poly(sodium 4-styrenesulfonate) (PSS) thin film fabricated by a layer-by-layer self-assembly (LBL-SA) method showed a high surface area and increased the sensitivity of gas sensor. When the QCM sensors coated with triethanolamine (TEA) or ($TiO_2$/PSS) were exposed to methyl mercaptan gas (1.0 ppm), the frequency shifts of QCM with TEA casting film and $TiO_2$/PSS thin film were ca. 9 Hz and ca. 24 Hz, respectively. As the bilayer number of ($TiO_2$/PSS) increased, the frequency shift of QCM sensor with ($TiO_2$/PSS) thin film was gradually increased. In addition, the frequency shift of QCM sensor was gradually increased as the concentration of methyl mercaptan gas increased from 0.5 ppm to 2.0 ppm. In this study, the surface morphology and sensor property of QCM sensor coated with ($TiO_2$/PSS) thin film were measured.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.469-474
• /
• 2012

The crystallinity and phase ratio of anatase to rutile in $TiO_2$ were estimated by x-ray diffraction (XRD) and x-ray absorption spectroscopy (XAS). Traditionally, the structural characterization of $TiO_2$ powders has been carried out by XRD techniques, which are comparatively easy in use and analysis. However, materials with amorphous phase, nano-sized or nano-structured crystallinities cannot be fully characterized by XRD because XRD analysis has a limit for abnormal contributions of the nano-crystal such as the surface contribution. From the comparison with the experimental and calculated Ti K-edge XAS spectra, we found the possibility of efficient estimation in the crystalinites and the phase ratio of anatase to rutile for nano-sized $TiO_2$ mixture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.185-186
• /
• 2008

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/SiO2/Si) using RF sputtering method at various substrate temperature. The optimum conditions of RF power and Ar/O2 ratio were 60[W] and 70/30, respectively. The rougness showed about 4.33[nm]. Deposition rate of SBN thin films was about 4.17[nm/min]. The capacitance of SBN thin films were increased with the increase of substrate temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.90-90
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode($Pt/Ti.SiO_2/Si$) using RF sputtering method. The dielectric constant of SBN thin films were increased with the increase of annealing temperature. The maximum dielectric constant of SBN thin film is obtained by annealing at 700[$^{\circ}C$]. The dielectric constant and dielectric loss had a stable value within -5~+5[V].

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.281-295
• /
• 2021

In this study, the direct amination of ethanol was performed over impregnated Ni on SiO2-Al2O3 mixed oxide catalysts prepared by varying Si/(Si + Al) molar ratio to 30 mol%. To characterize the physico-chemical properties of the catalysts used, X-ray diffraction (XRD), N2-physisorption, temperature-programmed desorption of iso-propyl alcohol (IPA-TPD), temperature-programmed desorption of ethanol (EtOH-TPD), temperature-programmed reduction with H2 (H2-TPR), H2-chemisorption and transmission electron microscopy (TEM) were used. The acidic property was continuously increased until Si/(Si + Al) = 30 mol% in SiO2-Al2O3 mixed oxides used. The dispersion of Ni metal and surface area, acid characteristics of the supported Ni catalyst have a complex effect on the catalytic reaction activity. The low reduction temperature of nickel oxide and acidic properties were beneficial to the formation of acetonitrile. In terms of conversion of ethanol, Ni/SiO2-Al2O3 catalyst with a molar ratio of 10 mol% Si/(Si+Al) showed the highest activity and a volcanic curve based on it. The tendency of results were consistent in the metal dispersion and catalytic activity.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.755-762
• /
• 1996

Background : Continuous positive airway pressure(CPAP) is doubtlessly using as a medical treatment of choice for patients with obstructive sleep apnea (OSA) syndrome. CPAP is effective in OSA patients as a physical "pneumatic pressure splint" mechanism. We have done this study for two purposes, first to seek for the factors to determine the optimal CPAP titer, second to predict the minimal CPAP titer using the determined factors. Methods: We studied a 72 OSA patients who were treated with CPAP. All of them were studied by using a two nights polysomnographic rests in hospital. We compared the patients requiring CPAP over $10cmH_2O$ with those who required CPAP under 5cm $H_2O$ to determine the factors affecting the minimal CPAP titer. Results : The high CPAP group is characterized by a significantly higher body mass index(BMI), apnea index(AI) and apnea and hyponea index(AHI) and significantly lower lowest $SaO_2$. Regression analysis using the optimal four variables resulted in the following prediction equation for CPAP titer. CPAPtiter=8.382 + 0.064 ${\times}$ BMI + 0.077 ${\times}$ AI - 0.004 ${\times}$ AHI - 0.077 ${\times}$ lowest $SaO_2$ When this regression equation was applied to the 72 patients, the mean CPAP titer as predicted by the above equation was $7.80{\pm}2.96$ mmHg. Compared this value with actually determined CPAPtiter, $7.93{\pm}4.00$mmHg, there was no significant difference between the two values. Conclusion: Obesity, apnea severity and lowest Sa02 were strongly correlated with CPAP titer. Linear regression equation for CPAP titer using these indices predicted very closely the actually measured values in the sleep laboratory.