• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.153-164
• /
• 2004

An integration study of time-variable small watershed and stream models (USEPA's SWMM and WASP5) was performed for impact assessment of urbanization on water environment. The study area, the Kyoungan Stream, the tributary of Paldang Lake, was divided into 111 subbasins, based on the topographic condition, land use, and drainage system. RUNOFF block of SWMM was applied to estimate runoff flow and quality. EXTRAN block computed daily and hourly flow according to simulated runoff flow, water supply, and drainage data. SWMM was connected to WASP5 by transforming output file of SWMM into input file of WASP5. The nonpoint source loads and flow data of SWMM were imported to WASP5. The stream was divided into 45 segments based on the watershed delineation. The study included three water quality parameters, BOD, TN, and TP. The validate models were used to examine the impact of urbanization on stream flow and water quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.269-273
• /
• 2016

세계적으로 기후변화와 관련한 연구가 증가하고 있다. 국내에서도 기후변화에 따른 수문학적 변화에 대한 연구가 주를 이루어 진행되고 있지만 오염부하량 변화에 대한 연구는 미흡하다. 또한 모형을 이용한 기후변화 예측에 있어 SWAT 모형이 주를 이루어 연구가 진행되고 있다. 본 연구는 기후변화 시나리오인 RCP시나리오 중 RCP 4.5와 RCP 8.5의 자료를 이용하여 용담댐 유역을 대상으로 기후변화에 따른 오염부하량을 예측하기 위하여 GWLF, SWAT 및 SWMM 모형을 선정하여 분석하였다. SWAT, GWLF 및 SWMM에 대하여 적용성 평가를 수행하였다. 기후변화에 따른 미래의 오염부하량을 예측한 결과 모델의 특성 등에 따라 결과가 다르게 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.383-383
• /
• 2018

최근 기후변화와 도시화로 인해 국지성 집중호우 및 불투수면적이 증가하고 있는 실정이며, 도시 지역 내의 첨두유량, 도달시간, 지체시간 등과 같은 수문학적 인자가 변화함에 따라 재산피해, 인명피해가 발생하고 있다. 저영향개발(Low Impact Development, LID) 기법은 수리수문학적 및 환경생태학적 문제를 저감하는 방안 중 하나로써 도시지역에서 수환경을 자연상태로 복원하는 대안으로 제시되고 있다. LID 기법 중 하나인 옥상녹화는 도시 내의 불투수면 증가로 인한 초과 지표면유출을 저감시켜 물관리를 하는 기술이다. 본 연구는 경남 양산시 부산대학교 제 2 캠퍼스에 조성된 옥상녹화 장치를 이용하여 정량적으로 유출량을 분석하였다. 비식생구와 식생구를 설치하고 실험의 시나리오는 강우강도를 25, 50, 75, 100 mm/hr로 설정하여 측정된 데이터 값을 바탕으로 SWMM(Storm Water Management Model) 모델링을 수행하였다. 유출량 값은 SWMM 5의 매개변수 추정지원 시스템인 SWMM-SCE를 이용하여 모형을 자동보정하였다. 보정된 모의유량은 실측유량과 0.28~3.81% 만큼의 오차를 보였고 각 시나리오에 따라 검증한 결과 상관계수가 0.82 이상으로서 실측값과 높은 상관성을 나타내었다. 옥상녹화 실험의 경우, 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 15초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 1.36% 감소, 4초 지연으로 최저의 효율이 나타났다. SWMM 모의 결과는 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 16초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 2.73% 감소, 4초 지연으로 최저의 효율이 나타났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1340-1346
• /
• 2005

A water quality modeling study was performed for Chunggye stream during combined sewer overflow(CSO) period, utilizing the diagnostic system for water management in small watershed, CREEK-1(Cyber River for Environment and Economy in Korea). This system integrated geogaphic information system, data base, landscape ecological model(FRAGSTATS), watershed model(SWMM), water quality model (WASP5), and computer graphic. In this study, the watershed model and water quality model were extensively utilized so as to simulate water qualities and flow in Chunggye stream during wet periods. The Chunggye stream watershed was divided into 18 sub-basins in the watershed model and the stream reach into 11 segments in the water quality model. The watershed model was validated against field measurements of BOD, TN, TP, and flow at the downstream location, where the model results showed a reasonable agreement with the field measurements at all parameters. From this study, it was shown that the stream water quality would change along with elapsed time from rainfall start as well as rainfall intensity. The model results indicated that the water quality would significantly upgrade due to the first flush and high sewage ratio of CSO at the beginning of rainfall event, but become degraded along with the runoff increase due to dilution effect.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.565-572
• /
• 2009

Hydraulic modeling is widely used to simulate wastewater flow. The simulated models are used to prevent flood and many other problems associated with wastewater flow in planning or rehabilitating sewer systems. In this study, MAKESW (An engineer, South Korea), MOUSE (DHI, Denmark), and SWMM (XPSoftware, USA) are used to for hydraulic modeling of wastewater in C-city, South Korea and E-city, Iraq. These modeling tools produced different results. SWMM comparably overpredicted runoff and peak flow. In using SWMM, use of accurate data with a high confidential level, detail examination over the target basin surface, and the careful selection of a runoff model, which describes Korea's unique hydraulic characteristics are recommended. Modification of existing models through the optimization of variables cannot be achieved at this moment. Setting up an integrated modeling environment is considered to be essential to utilize modeling and further apply the results for various projects. Standardization of GIS database, the criteria for and the scope of model application, and database management systems need to be prepared to expand modeling application.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.181-190
• /
• 2017

Population congestion and increasing porosity caused by urbanization and increasing rainfall intensity are the main reasons for urban inundation damage. In order to reduce the damage to urban flooding, it is necessary to take a inundation analysis model that can be considered the topographic impact (i.e., building and road) and simulate the detailed inundation areas. In this study, Grid based Inundation Analysis Model (GIAM) is developed using a two-dimensional shallow water equations. The study area is Gangnam basin, with a surface area of $7.4km^2$, which includes 5 drainage areas such as Nonhyun, Yeoksam, Seocho 1, 2, and 3. EPA SWMM5 is used for simulating the overflows at each manhole. GIAM model is constructed to allow for simulating a inundation area with 6 m grid size. The inundation analysis is conducted in two heavy rainfall events (Sep. 21, 2010 and July 27, 2011) for the model evaluation. The accuracy of the simulated inundation area is calculated 0.61 and 0.57 at POD index using the historical flooded area report. The developed model will be used as a tool for analyzing the flood prone areas based on rainfall scenario, and a tool for predicting the detailed inundation area in the real-time.

• Journal of Korean Society on Water Environment
• /
• v.34 no.3
• /
• pp.308-315
• /
• 2018

SWMM-LID was calibrated with flow monitoring data in LHI to evaluate runoff after LID application. The flow rate in the B basin was estimated to be 0.94 and 6.15 for O/S and $D_v$, respectively. In the A and C basins, the difference between the observed and simulated data was greater than in the B basin. As a result of runoff reduction efficiency by the application of LID facilities, the change of infiltration increased from 34.6 % to 45.8 % in the entire watershed, and the runoff decreased from 58.8 % to 46.3 %. In the runoff reduction of each LID facility, rain garden E showed the highest effect with 99.9 % and bioretention B showed the lowest effect with 27.5 %. In order to evaluate the efficiency of each LID facility, a comparison is made between the pore volume (V) of the LID and the catchment area (A). The runoff showed a runoff reduction effect of about 70 % above the 0.1 volume/area (V/A) value. As a result of examining the runoff reduction with LID facilities by the LID module of SWMM, a reasonable design is possible by reflecting the appropriate LID volume to drainage area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.195-195
• /
• 2022

도림천의 최상류인 관악산 유역에 서울대학교 관악캠퍼스가 건설되었다. 이로 인해 물순환은 기존의 자연 상태에서 점점 변해 왔는데, 이는 하류 도림천의 홍수 및 수질 오염의 피해를 증가시켰다. 도시화된 서울대학교 관악캠퍼스의 물순환 회복은 하류 홍수피해 방지와 지속 가능한 친환경 캠퍼스를 위해 중요하나, 이에 관한 연구는 미흡한 실정이다. 따라서 본 연구에서는 SWMM(Storm Wastewater Management Model)을 활용하여 캠퍼스 내 물순환 현황을 시간과 공간에 대해 정량적으로 파악하고, 물순환 회복을 위해 지속 가능한 효율적인 시스템을 구현하고자 한다. 먼저 유역 현황 조사와 함께 SWMM 구축에 필요한 수문·기상학적 변수와 물리적 매개변수를 확립하였다. 수문·기상학적 변수로는 기상관측장비 ATMOS-41의 설치와 기상청 자료로부터 수집하였으며, 물리적 매개변수는 환경부의 자료를 활용하였다. 그 후, 서울대-도림천 배수분구에 대해 SWMM을 적용하여 월별로 유출량, 침투량, 그리고 증발산량을 모의하였다. 시간에 따른 물순환 분석의 경우 강수량 자료와 불투수율의 변화 정도에 따라 월별 물수지 비율을 파악하고, 공간에 따른 물순환 분석의 경우 동일한 기간에 대해 분할한 16개의 소유역 별 유출량과 유역의 평균 유출량을 비교하여 분석하였다. 대상 유역의 월별 물수지 비율을 모의하는데 효율성을 높이고자 배수 구역 및 관망을 세밀하게 나눈 경우와 그렇지 않은 경우에 대해 분석하였다. 그 결과, 시간에 따른 연평균 물수지 비율의 차이는 2020년 모의 결과와 최근 5년 평균(2015~2019년) 모의 결과 비교 시 각 물수지 항목별로 0.47~2.34%의 차이를 보였다. 공간적으로는 16개 소유역 중 저류시설을 포함한 9개 소유역의 표면 유출량이 유역의 평균 유출량보다 많게 모의 되었다. 또한, 유역을 구성할 때보다 관망을 구성할 때 높은 정확성이 요구됨을 알 수 있었다. 본 연구는 ATMOS-41을 통한 지속적인 수문·기상학적 요소의 모니터링과 SWMM 모델 구축을 통해 앞으로도 변경사항을 추가함으로써 친환경 캠퍼스로의 전환에 이바지할 것으로 기대한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.28-38
• /
• 2004

The purpose of this study is to analyze the urban hydrologic state by the use of GIS, resolution and interpolation. The determination coefficient($R^2$) and Regression Formula were derived from the contour of digital map for the accuracy, and DEM data was made by using TIN interpolation by the size of the grid. By using the observed DEM data, topographical factors were extracted from the small basin, size, the width of a basin and the slope, and were applied in the urban runoff model. Through the model, we tried to find out the most suitable runoff model in a small basin of Yosu-Munsu area. As a result of applying models to the drainage considered, the runoff hydrograph estimated by SWMM model was closer to the observed one than that estimated by ILLUDAS model. The difference between the runoff hydrograph by SWMM and the observed one is maximum error of 19%, minimum error of 5% and average error of 13%. The influence of duration in contrast to pick time is insignificant in a urban small basin. As a conclusion of this study, SWMM model was more suitable and applicable for the urban runoff model than ILLUDAS model due to its accuracy and various abilities.

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.303-313
• /
• 2017

In environmental impact assessments for large urban development projects, the Korean government requires analysis of stormwater runoff before, during and after the projects. Though hydrological models are widely used to analyze and prepare for surface runoff during storm events, accuracy of the predicted results have been in question due to limited amount of field data for model calibrations. Intensive field measurements have been made for storm events between July 2015 and July 2016 at a sub-basin of the Gwanpyung-cheon, Daejeon, Republic of Korea using an automatic monitoring system and also additional manual measurements. Continuous precipitation and surface runoff data used for utilization of SWMM model to predict surface runoff during storm events with improved accuracy. The optimal values for Manning's roughness coefficient and values for depression storage were estimated for pervious and impervious surfaces using three representative infiltration methods; the Curve Number Methods, the Horton's Method and the Green-Ampt Methods. The results of the research is expected to be used more efficiently for urban development projects in Korea.