• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.126-135
• /
• 2015

Increase of delivery effect of pollutant loads and surface runoff due to urbanization of catchment area results in serious environmental problems in receiving urban streams. This study aims to develop integrated stormwater management system to assist efficient urban stream flow and water quality control using information from the Storm Water Management Model (SWMM), real time water level and quality monitoring system and remote or automatic treatment facility control system. Based on field observations in the study site, most of the pollutant loads are flushed within 4 hours of the rainfall event. SWMM simulation results indicates that the treatment system can store up to 6 mm of cumulative rainfall in the study catchment area, and this means any type of normal rainfall situation can be treated using the system. Relationship between rainfall amount and fill time were developed for various rainfall duration for operation of stormwater treatment system in this study. This study can further provide inputs of river water quality model and thus can effectively assist integrated water resources management in urban catchment and streams.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.397-405
• /
• 2017

In case of inundation in a city where populations and properties are highly concentrated, unlike rural areas it is necessary to apply the method of calculating the damage amount considering the sewage overflow and the corresponding building damage. In this study, Dorim 1 drainage sector has been analyzed with Multi-Dimensional Flood Damage Assessment (MD-FDA) for flood forecast. It is analyzed with past flood history through the SWMM model and calculated the amount of damage with district base data and the result of flow analysis. The result of the SWMM model to predict a range of flood, it was shown that the wide area after 4 hours (at 16:30) by sewer overflow. The building damage was estimated using MD-FDA. As a result, the maximum flood area has shown as $205,955m^2$ (0~0.5 m: $205,190m^2$, over 0.5 m: $865m^2$) and estimated building damage of Dorim 1 drainage sector is approximately 15.5 billion KRW (Korean won) and other contents is 7 billion KRW (Korean won). Also from 0 to 0.5 m depth estimated damage is approximately 22.4 billion KRW (Korean won) and over 0.5 m is 100 million KRW (Korean won). Based on the results of this study, it would be necessary to estimate the amount of sub-divided flood damage in urban areas according to various damage patterns such as flood depth and flood time.

• Journal of Korea Water Resources Association
• /
• v.41 no.9
• /
• pp.929-941
• /
• 2008

The objectives of this study are to propose a system for combined use of a hydrologic and a hydraulic model for urban flood forecast model and to evaluate the system on the $300km^2$ Jungrang urban watershed area, which is relatively large area as an urban watershed and consequently composed of very complex drainage pipes and streams with different land uses. In this study, SWMM for hydrologic model and HEC-RAS for hydraulic model are used and the study area is divided into 25 subbasins. The SWMM model is used for sewer drainage analysis within each subbasin, while HEC-RAS for unstready flow analysis in the channel streams. Also, this study develops a GUI system composed of mean areal precipitation input component, hydrologic runoff analysis component, stream channel routing component, and graphical representation of model output. The proposed system was calibrated for the model parameters and verified for the model applicability by using the observation data. The correlation coefficients between simulated and observed flows at the 2 important locations were ranged on 0.83-0.98, while the coefficients of model efficiency on 0.60-0.92 for the verification periods. This study also provided the possibilities of manhole overflows and channel bank inundation through the calculated water profile of longitudinal and channel sections, respectively. It can be concluded that the proposed system can be used as a surface runoff and channel routing models for urban flood forecast over the large watershed area.

• Land and Housing Review
• /
• v.8 no.4
• /
• pp.249-256
• /
• 2017

Urbanization can be remarkable affected flood, pollutant loading, ecological system, and green infrastructure by distortion of hydrologic cycle. In order to mitigate these problems in urban, Low Impact Development(LID) technique has been introduced and applied in the world. SWMM model was calibrated with sets of field monitoring data and applied for calculation of runoff and pollutant loading in Asan-tangjung LID city under 2016 rainfall. Runoff reduction of watershed and catchment basins were showed efficiency 12.2% and 62.0%, respectively. Reduction of COD and TP loading also high efficiency in catchment basins were evaluated 74.9 and 71.4%. The results of this study can be used effectively in decision making processes of urban development project by comparing watershed runoff and pollutant reduction by designs of sort of LID technique, LID volume and location.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.213-222
• /
• 2005

This study is a sensitivity analysis of the parameters which affect the simulation results under various design rainfall conditions, using the SWMM model, for three selected basins in urban areas. The sensitivity of the peak flow rate is defined by $S_Q$ (=1.0 - (min. ratio of peak flow rate/max. ratio of peak flow rate)), and the rainfall conditions are classified in terms of design rainfall frequency, duration, and distribution. The simulation results show that in most conditions the parameters - the impermeable area ratio, the sewer slope, and the initial infiltration capacity - have more significant effects on the results than other parameters. As the design rainfall frequency increases, the sensitivity of the sewer slope and sewer roughness increases, while the parameters related with the surface runoff decrease. When the rainfall duration increases, the sensitivities of most parameters of surface runoff and sewer flow decrease. Also, at the 1st quarterly Huff rainfall distribution condition, the impermeable area ratio has high sensitivity, but at the 4th quarterly condition the parameters related with sewer flow show higher sensitivities. These tendencies can be explained by considering the procedure for computing the effective rainfall and kinematic wave on the surface and sewer flow.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.387-387
• /
• 2019

우리나라는 최근 10년간 자연재난 중 호우로 인해 인명피해 약 120명, 재산피해 약 1조 4천억원을 기록하였으며, 또한 기후변화로 인해 강한 국지성 집중호우의 발생빈도가 높아질 것으로 예상됨에 따라 호우에 의한 침수피해가 증가될 것으로 예상된다. 특히 본 연구 대상지역인 인천시의 경우 도시화로 인해 인구밀도 및 불투수지역이 증가함에 따라 침수피해가 대형화되고 있는 실정이다. 이에 본 연구에서는 인천시와 같은 도심지역에서의 침수발생을 사전에 예측하고 침수발생에 대한 대비 대응을 위해 하수관망 해석을 위한 SWMM 모델과 침수해석을 위한 2DIS 모델을 연계하여 인천시 침수심 생산체계를 구축하고자 한다. 본 연구에 적용한 침수심 생산과정은 크게 강우자료 생산, 유역 및 하수관망 해석, 침수 해석 등 총 3단계 과정으로 구성된다. 강우자료 생산과정에서는 유역 및 하수관망 해석과 침수 해석을 위한 10분 단위 유역평균 강우량자료를 생산한다. 유역 및 하수관망 해석과정에서는 지형자료 및 강우자료를 이용하여 SWMM 모델을 통해 맨홀에서의 월류량 자료를 생산한다. 마지막으로 침수해석과정에서는 지형자료와 함께 앞서 두 과정을 통해 생산된 강우 및 맨홀 월류량 자료를 입력자료로 하여 2DIS 모델을 통해 10분 단위의 시계열 침수심 정보 및 격자별 최대 침수심정보를 생산한다. 본 연구에서의 공간해상도는 도심지역의 도로단위 고해상도 침수심 정보 생산을 위해 6m 단위로 하였으며, 시간해상도는 단시간에 발생하는 도심지역의 침수특성 반영을 위해 10분으로 하였다. 또한, 침수발생 시 발생한 강우의 지표흐름 영향을 반영하기 위해 빗물받이효율 변화에 다른 침수심을 분석하였다. 본 연구를 통해 도출된 모의 침수심 결과를 실제 침수피해사례 및 풍수해저감종합계획 결과와 비교하였으며, 다수 지역에서 실제 침수발생지역과 동일하게 침수가 발생한 것으로 나타났다. 또한, 전체적인 침수 양상이 유사하게 발생함을 확인하였다. 향후 관측자료를 이용한 하수관망 및 침수해석 모델의 최적화, 하천유량 예측을 통한 하류 기점수위의 반영 등을 통해 정확도를 개선할 수 있을 것으로 판단되며, 이를 통해 인천시 침수발생을 사전에 예측하여 침수피해에 대비 및 대응과 침수피해 발생 시 정확하고 상세한 원인 분석 및 예측이 가능할 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.486-490
• /
• 2017

도심지에서의 침수피해는 이상홍수 및 국지성 호우 시 우수관거 시설기준 미달, 펌프장 등 배수시설이 설치되지 않아 하천의 계획홍수위보다 제내지의 지반고가 낮은 저지대 지역에서 많이 발생하고 있다. 특히, 내수침수의 경우는 외수에 따른 범람보다는 국민의 재산과 인명피해에 직접적인 영향을 미치므로 침수피해 위험도가 높은 지역의 주민에게 그 지역의 침수빈도와 범위를 인지시키고 사전대응 능력을 향상시킬 필요가 있다. 따라서 연구의 목적으로 매년 피해가 발생한 이력이 있는 위험지구에 대해 전국단위 시군구별 침수피해 지도를 작성하여 침수심 산정과 피해액 예측할 수 있는 기초자료로 활용하고, 주민들의 신속한 대처를 통해 그들의 생명과 재산을 보호하여 재난 안전 국가 이미지 제고에 기여하고자 한다. 본 연구에서는 도심지 유출모형인 XP-SWMM을 활용하여 내수재해 위험요인에 대한 전국을 해석하는 것에 한계가 있어 풍수해저감종합계획에 수록된 XP-SWMM모의 분석 결과 값을 활용하고자 하였다. 기 수립된 전국 풍수해저감종합계획의 과거 피해 자료를 바탕으로 이상 집중호우나 태풍의 내습 시 풍수해 피해 발생 가능성이 제일 높은 지역을 연구범위 대상지역으로 선정하였다. 그 중 풍수해의 주요 원인으로서 태풍, 집중호우 및 해일로 인한 피해발생 빈도가 높은 지역이면서 하천재해 및 내수침수 피해가 많은 경기도 동두천시를 연구대상 지역으로 선정하였으며, 대상지 유역 현황과 지형정보 및 빈도별 침수심을 조사하였다. 수록된 내용에 따르면 경기도 동두천시는 우수관망의 밀도가 높은 4개 위험지구를 내수재해 발생가능성 지역으로 선정하여 10년, 20년, 30년, 50년, 100년, 200년 6개 빈도에 대해 XP-SWMM 모의를 실시하였다. 이와 같이 수록된 각 빈도에 대한 모의 결과 값을 GIS기술을 이용하여 디지털화 하고 부가적인 분석을 위한 GIS데이터화 하는 내삽법을 선정하여 침수면적 및 침수심을 산출하였다. 그러나 면적비교를 통해 모의 결과 값을 디지털화 하는 과정에서 많은 오차가 발생되는 것을 확인하였고, 이를 보완하기 위해 좌표보정 자동화 프로그램을 개발하여 이러한 문제점을 제거하여 신뢰도를 향상시켰다. 이렇게 계산된 연구 대상지역의 침수심과 침수면적을 활용하여 지도제작 표준 지침서 및 가이드라인을 제시하여 한국형 호우피해 지도제작 기술개발에 기여하고, 비구조적 대책으로서 이상홍수에 대한 위험도를 파악하여 지역별 도심침수 방지를 위한 대비체계를 구축하는 등 위험지역에 대한 사전분석 및 활용에 기초자료로 도움이 되고자 한다.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.41-46
• /
• 2022

Recently, the scale of flood damage occurring in urban areas is increasing due to climate change and urbanization, so various flooding analysis techniques are needed. In the Sadangcheon Stream basin, which has been continuously flooded since 2010, a basic plan for improving drainage was established using XP-SWMM and measures to prevent flooding were proposed. However, in the process of inundation analysis, the analysis considering the city's buildings was not conducted, resulting in a problem that the degree of flooding damage tends to be overestimated. Therefore, in this study, XP-SWMM was used to compare and analyze cases where buildings were not considered and designated as inactive areas. As a result of the study, it was analyzed if the building was not considered, the flood damaged area was 271,100 m² and the depth of submersion was 0.15 m, and if the building was considered inactive area, the flood damaged area was 172,900 m² and the depth of submersion was 0.32 m that it is under-estimated about 36% and an flow velocity around the building increased from 1.62 m/s to 1.83 m/s about 1.12 times.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.193-202
• /
• 2015

In this study, a long term monitering of nonpoint source pollution runoff is conducted at the area of transportation related and EMCs(Event Mean Concentrations) in terms of water quality items, such as BOD, $COD_{Mn}$, SS, T-N and T-P are determined for each not only runoff event and but also observation site. On the other hands, SWMM(Storm Water Management Model) model is constructed using the data collected in the transportation areas selected. Model calibration and verification of SWMM is carried out based on the data collected. And simulated EMCs was compared with observed EMCs by monitoring and prior studies. SWMM applicability estimation was Using the compared result. The results of simulation showed that BOD 5.787 ~ 14.475 mg/L, $COD_{Mn}$ 12.946 ~ 59.611 mg/L, SS 13.742 ~ 46.208 mg/L, T-N 2.037 ~ 5.213 mg/L, T-P 0.117 ~ 0.415 mg/L. And a differential between simulated EMCs and observed EMCs is too low so comparing result show high fit(BOD 4.27 %, $COD_{Mn}$ 4.87%, SS 2.31%, T-N 5.78%, T-P 14.45%). A results of compared with the prior studies, BOD and T-P are included range of prior studies, $COD_{Mn}$ and SS are lower than range of prior studies, T-N is higher than range of prior studies. Differential between simulated EMCs and prior studies EMCs was showing for survey seasonal and changing land-use, so from now on, EMCs of using the internal representatives value will be calculated by more monitoring toward various precipitation events.

• Water for future
• /
• v.48 no.6
• /
• pp.54-64
• /
• 2015