• Title/Summary/Keyword: SWATH

Search Result 135, Processing Time 0.027 seconds

A Study of the Hull Form of Oil Recovery Vessel by Using Magnetic Fluid (자성유체를 이용한 유회수선박의 선형연구)

  • 이귀주;박영식;김경화;노준혁;장희문
    • Journal of Ocean Engineering and Technology
    • /
    • v.15 no.2
    • /
    • pp.1-5
    • /
    • 2001
  • A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

  • PDF

An optical design of a high resolution earth observation camera for small satellites (소형 위성용 고해상도 광학카메라 광학설계)

  • 이준호;김용민;이응식;유상근;김이을;최영완;박동조
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.1
    • /
    • pp.6-12
    • /
    • 2000
  • A space-borne earth observation camera is an electro-optical instrument to measure the characteristics of the earth's surface, and to transmit the measured data to a ground station(s). The specifications of a space-borne camera, such as resolution, swath width and observation bands, are determined by its mission objectives. This paper lists some specifications of a camera suitable for small satellite and then presents an optical design, with the results of tolerancing analysis, which satisfies the given specifications. tions.

  • PDF

Development of High Speed Satellite Data Acquisition System

  • Choi, Wook-Hyun;Park, Sang-Jin;Seo, In-Seok;Park, Won-Kyu
    • Proceedings of the KSRS Conference
    • /
    • 2003.11a
    • /
    • pp.280-282
    • /
    • 2003
  • The downlink data rates of the space-born payloads such as high-resolution optical cameras, synthetic aperture radars (SAR) and hyper-spectral sensors are being rapidly increased. For example, the image transmission rates of KOMPSAT-2 MSC(Multi-Spectral Camera) is 320Mbps even if on-board image compression scheme is used.[1] In the near future, the data rates are expected to be a level 500${\sim}$600Mbps because the required resolution will be higher and the swath width will be increased. This paper describes many techniques they enable 500Mbps data receiving and archiving system.

  • PDF

Technical Status of Microwave Remote Sensing of Tropical Cyclones (열대저기압 마이크로파 원격탐사의 기술 현황)

  • Choi, Geun-Chul;Yang, Chan-Su;Pack, Han-Il
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2006.11a
    • /
    • pp.193-199
    • /
    • 2006
  • This article reviews several microwave instruments employed in observation and analysis of tropical cyclones (TCs), typhoon, and hurricanes. Microwave signals are useful for observing tropical cyclones with severe storms since it isn't severely absorbed by the clouds and rain in the storm. The instruments discussed include scatterometers, microwave radiometers, synthetic aperture radars (SARs), and rain radar from space. The date such as winds, rainfall and cloud-distribution in the TCs obtained by microwave instruments provide important informations for forecasting the intensity and path of the typhoon. For example, there're wind-distribution provided by SSM/I which has a wide swath, detailed wind fields from ERS-1, 2 scatterometers and RADARSAT-1 SAR and TRMM's rain radar pro 떠 ding high resolution. Operational satellite instruments lunched recently have improved upon the problems of low resolution and narrow swath indicated at the beginning microwave remote sensing. Understanding and practical using sufficiently about the microwave instruments will serve for searching the features such as generation and development of the TCs.

  • PDF

Dynamic Behavior Character of Vessel Using DGPS and Motion Sensor (DGPS와 Motion Sensor를 이용한 선박 동적 거동특성)

  • Choi, Chul-Eung;Kim, Youn-Soo
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.12 no.4 s.31
    • /
    • pp.35-43
    • /
    • 2004
  • Multibeam Echosounder system is the latest technology of a hydrographic survey utilized in producing an electronic nautical chart, obtaining a DEM with high precision, making a moving image by Swath surveying a wide area. As a fundamental study for improving the precision of MBES, we compared and analyzed measurements of DGPS and Motion sensor, and studied for the dynamic characteristics of vessel's movements. DGPS was installed in front and in the rear and on both side or the vessel and surveyed. The receiving precision of surveyed GPS results was obtained to the satisfactory extent that was possible to valuate the accuracy of Motion sensor as 0.0016$^{\circ}$ of the roll value and 0.0009$^{\circ}$ of the pitch value. The relationship between the values of heading, pitch, and roll in Motion sensor and the data of DGPS was proportional correlation. In addition, it is considered that deviations by elements like rapid turning and vibration of the vessel will be occurred, although the correlation of each deviation according to each amount or change is proportional. It is suitable that GPS installs in the central line of the vessel that is less affected than other places by waving because the amount of change in the tide level obtained from GPS survey and the value of heave are similar with the values taken by Motion sensor, and the velocity of GPS is different from installed places. The accuracy of the final result from MBES could be affected by the values of gyro and Motion sensor inputted to MBES processor because there were intervals of 15s and 13s of receiving time in gyro and Motion sensor respectively compared with the real-time measurements of DGPS.

  • PDF

Typhoon Simulation with a Parameterized Sea Surface Cooling (모수화된 해면 냉각을 활용한 태풍 모의 실험)

  • Lee, Duho;Kwon, H. Joe;Won, Seong-Hee;Park, Seon Ki
    • Atmosphere
    • /
    • v.16 no.2
    • /
    • pp.97-110
    • /
    • 2006
  • This study investigates the response of a typhoon model to the change of the sea surface temperature (SST) throughout the model integration. The SST change is parameterized as a formulae of which the magnitude is given as a function of not only the intensity and the size but the moving speed of tropical cyclone. The formulae is constructed by referring to many previous observational and numerical studies on the SST cooling with the passage of tropical cyclones. Since the parameterized cooling formulae is based on the mathematical expression, the resemblance between the prescribed SST cooling and the observed one during the period of the numerical experiment is not complete nor satisfactory. The agreements between the prescribed and the observed SST even over the swath of the typhoon passage differ from case to case. Numerical experiments are undertaken with and without prescribing the SST cooling. The results with the SST cooling do not show clear evidence in improving the track prediction compared to those of the without-experiments. SST cooling in the model shows its swath along the incomplete simulated track so that the magnitude and the distribution of the sea surface cooling does not resemble completely with the observed one. However, we have observed a little improvement in the intensity prediction in terms of the central pressure of the tropical cyclone in some cases. In case where the model without the SST treatment is not able to yield a correct prediction of the filling of the tropical cyclone especially in the decaying stage, the pulling effect given by the SST cooling alleviates the over-deepening of the model so that the central pressure approaches toward the observed value. However, the opposite case when the SST treatment makes the prediction worse may also be possible. In general when the sea surface temperature is reduced, the amount of the sensible and the latent heat from the ocean surface become also reduced, which results in the weakening of the storms comparing to the constant SST case. It turns out to be the case also in our experiments. The weakening is realized in the central pressure, maximum wind, horizontal temperature gradient, etc.

Filtering & Cridding Algorithms for Multibeam Echo Sounder Data based on Bathymetry (수심에 기반한 멀티빔 음향 측심 필터와 격자 대표값 선정 알고리즘)

  • 박요섭;김학일
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1999.11a
    • /
    • pp.260-265
    • /
    • 1999
  • 멀티빔 음향측심기(Multibeam Echo Sounder)는 기존의 단빔 음향측심기(Singlebeam Echo Sounder)와 달리 탐사선 진행방향의 수직(Crosstrack)으로 해저면을 주사(Swath)하여, 한 번의 송수신(Ping)으로 다중의 빔 자료 - 수심, 후방산란된 음압(Backscattered Amplitude), 사이드 스캔 소나(Side Scan Sonar) 자료 - 를 취득하는 장비이다. 멀티빔 음향 측심기를 이용한 해저면 탐사의 경우, 수심이 변함에 따라 주사폭(Swath width)이 변화하고, 각 빔의 수평 해상도(Footprint)는 수심과 더불어 빔폭(Beam width)에 의하여 동적으로 변화한다. 멀티빔 음향 측심기는 해저면을 전역탐사 할 수 있을 뿐만 아니라, 연속된 음향 탐사를 통하여 이웃한 핑 사이에 발생하는 전방중첩영역(Endlap)과 이웃 측선(Trackline)을 따라 겹쳐지는 측방중첩영역(Sidelap)의 자료들을 이용하여 멀티 뎀 자료들의 전반적인 정확도 및 신뢰도를 평가할 수 있다. 본 논문은 수로 측량(Hydrographic Survey)에서 사용되는 멀티빔 음향 측심기를 운영하여 얻어진 측심 자료를 처리하는 알고리즘 개발에 관한 연구이다. 본 논문에서는 L3사의 Sea Beam 2100 벌티빔 음향 측심기를 대상으로, 멀티빔의 측심 원리와 해저 지형에 대한 일반적 이해를 통하여 획득된 측심 자료의 통계적 특성을 파악하고, 오측심된 수심 자료를 제거하는 방법을 제안하며, 측심 구간의 대표격자 크기를 결정하는 기준을 제시한다. 또한, 항공원격탐사에서 고도 추정시 사용되고 있는, 평균보간법, 가중평균 보간법과, 본 논문에서 제안하는 격자 대표값 선정 알고리즘(Gridding Algorithms)의 결과를 비교하고, 최종적으로 얻어지는 해저 수치지형모델(DEM, Digital Elevation Model)과 후방산란 영상을 제시한다. 빠른 한지형잔디들이 지표면을 피복하도록 하고 여름의 고온기와 장마시기에는 뿌리전단력이 우수한 이러한 초종들로 지표면이 피복되도록 하는 것이 이상적이라 생각된다. 4. 혼파처리간의 토사유출량을 비교한 결과 토사 유출 억제효과는 한지형과 나지형잔디들의 혼합형(MixtureIII)과 자생처리구(MixtureV), Italian ryegrass와 자생식물의 혼합형(MixtureIV)등에서 비교적 낮은 수치를 토사유출량을 기록하였다. 이러한 결과는 자생식물들이 비록 초기생육속도는 외래도입초종에 떨어지지만 토사유출의 억제효과면에서는 이들 외래초종에 필적할 수 있음을 나타낸다고 할 수 있겠다.중량이 약 115kg/$m^2$정도로 나타났다.소 들(환경의 의미, 사람의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$$\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게 경계

  • PDF

A Study on Extending Successive Observation Coverage of MODIS Ocean Color Product (MODIS 해색 자료의 유효관측영역 확장에 대한 연구)

  • Park, Jeong-Won;Kim, Hyun-Cheol;Park, Kyungseok;Lee, Sangwhan
    • Korean Journal of Remote Sensing
    • /
    • v.31 no.6
    • /
    • pp.513-521
    • /
    • 2015
  • In the processing of ocean color remote sensing data, spatio-temporal binning is crucial for securing effective observation area. The validity determination for given source data refers to the information in Level-2 flag. For minimizing the stray light contamination, NASA OBPG's standard algorithm suggests the use of large filtering window but it results in the loss of effective observation area. This study is aimed for quality improvement of ocean color remote sensing data by recovering/extending the portion of effective observation area. We analyzed the difference between MODIS/Aqua standard and modified product in terms of chlorophyll-a concentration, spatial and temporal coverage. The recovery fractions in Level-2 swath product, Level-3 daily composite product, 8-day composite product, and monthly composite product were $13.2({\pm}5.2)%$, $30.8({\pm}16.3)%$, $15.8({\pm}9.2)%$, and $6.0({\pm}5.6)%$, respectively. The mean difference between chlorophyll-a concentrations of two products was only 0.012%, which is smaller than the nominal precision of the geophysical parameter estimation. Increase in areal coverage also results in the increase in temporal density of multi-temporal dataset, and this processing gain was most effective in 8-day composite data. The proposed method can contribute for the quality enhancement of ocean color remote sensing data by improving not only the data productivity but also statistical stability from increased number of samples.

A Study on the Resistance Characteristics of a Stepped Planing Hull Using a High-Speed Towing System (고속 예인시스템을 이용한 단을 가진 활주형선의 저항특성 고찰)

  • Shin, Jeong-Il;Yang, Ji-Man;Park, Ho-Won;Kim, Jae-Sung;Kim, Hyo-Chul
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.42 no.4 s.142
    • /
    • pp.341-349
    • /
    • 2005
  • With increasing demands of high speed transportation, recently a lot of high speed marine vehicles, such as SWATH, semi-planing craft, planing craft, hydrofoil craft, SES and so on, have been paid attention especially in high speed region over the Froude number 0.5. The resistance characteristics of the vehicles should be experimentally evaluated in the towing tank. At the Seoul National University, a light-weight cantilever type towing carriage was devised and installed in the towing tank. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of a stepped planning hull in the towing tank and the resistance performances of the hull are introduced in this report.

DEVELOPMENT OF A GRANULAR HERBICIDE APPLICATOR ATTACHED TO RICE TRANSPLANTER

  • Kim, J. Y.;Kim, H. J.;Park, S. H.;Lee, C. S.
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2000.11c
    • /
    • pp.827-834
    • /
    • 2000
  • A granular herbicide applicator attached to conventional ride-on rice transplanter with 6 rows was developed in order to carry out both transplanting and herbicide application at once. It resulted in labor saving by 98%. The prototype is composed of a metering device and a spinning disc spreader. The application rate per 10a can be varied from 1 to 3 kg and the application swath is 1.8 m, which is the planting width of the ride-on rice transplanter with 6 rows. The angular speed of spinning disc and the application height were used as design factors to obtain the uniform distribution of herbicide granules. As the result of experiment, the distribution uniformity showed a tendency to be proportional to the increases of both spinner angular speed and application height. The prototype with angular speed of spinning disc of 7359 rpm and the application height of 20 cm was made and its distribution uniformity was relatively uniform with the CV(coefficient of variation) of 21.7%. In field test, when the tested herbicides such as ACl40+Stomp and Londax+YRC were applied, the weed control has continued for 65 days since transplanting was done.

  • PDF